[ros-bugs] [Bug 3191] New: Install locks up on real hardware at language selection.
ReactOS.Bugzilla at www.reactos.org
ReactOS.Bugzilla at www.reactos.org
Mon Apr 21 19:10:55 CEST 2008
http://www.reactos.org/bugzilla/show_bug.cgi?id=3191
Summary: Install locks up on real hardware at language selection.
Product: ReactOS
Version: 0.3.4
Platform: x86 Hardware
OS/Version: ReactOS
Status: UNCONFIRMED
Severity: blocker
Priority: P3
Component: Setup
AssignedTo: ros-bugs at reactos.org
ReportedBy: ritchie at mono.org
QAContact: ros-bugs at reactos.org
Tested on two PCs :
1) Pentium II 400MHz, 128MB RAM, Award BIOS 4.51PG dated 1999, 8MB Matrox VGA
controller, 3COM Etherlink PCI 10baseT network card. No other cards installed.
No OS installed - one hard drive with no partitions created.
2) Dell Inspiron 3200 - upgraded to 96MB otherwise standard configuration. One
partition with Windows 98.
Steps to reproduce:
1) Burn ReactOS 0.3.4 release iso (used "cdrecord -dev=0,1,0 -data ReactOS.iso"
under Fedora Core 4 Linux to do this)
2) Insert burnt CD into test PC
3) Reboot test PC and wait for the language selection screen
Actual results:
* Keyboard is unresponsive. No keys, including up and down arrows and ENTER do
anything. Hitting the reset button has no effect - remains on language
selection screen. "Soft" power off also has no effect - had to physically
remove the power cable to get back to the boot prompt.
Expected results:
* Language selection is allowed, keyboard is responsive, reset button reboots
back to BIOS POST screen.
This bug does _not_ occur when running ReactOS 0.3.4 on emulated hardware via
qemu, which displays the expected results.
--
Configure bugmail: http://www.reactos.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug.
You are the assignee for the bug.
More information about the Ros-bugs
mailing list