[ros-dev] ROS crashes after splash screen
magnus at itkonsult-olsen.com
Mon Jan 10 01:45:02 CET 2005
Are the garphic card a intel 810 then vbe driver does not work
the 810 should be vbe 2.0 compatible but it does not seam that case,
or if you got a graphic driver with vbe 1.x on.
it sound like one of these problem.
Which graphic card do you have Murphy Ged (Bolton) ?
----- Original Message -----
From: "Sylvain Petreolle" <spetreolle at yahoo.fr>
To: "ReactOS Development List" <ros-dev at reactos.com>
Sent: Monday, January 10, 2005 1:14 AM
Subject: Re: [ros-dev] ROS crashes after splash screen
The miniport errors after framebuf.dll loading show that you have a video
Try to switch the display config to a VGA screen, not VESA.
--- "Murphy, Ged (Bolton)" <MurphyG at cmpbatteries.co.uk> a écrit :
> When installing ROS (0.2.5 & svn) on an old PII machine I have (real
> hardware), the initial install goes smoothly, machine reboots, splash
> flashes up and then it hangs on the blue screen just before configuration.
> Viewing in debug mode, I get masses of text streaming up the screen, much
> fast to read. After around 10 seconds or so the machine reboots.
> I've attached the debug log in the hope someone can figure out what's
> happening. (you can see what I mean by the 'masses of text')
> There seems to be quite a few strange messages in there.
> I have had older versions of 0.2.4 installed on this machine before.
Sylvain Petreolle (spetreolle_at_users.sourceforge.net)
humans are like computers,
yesterday the BIOS was all
- today its just a word
Ros-dev mailing list
Ros-dev at reactos.com
More information about the Ros-dev