[ros-kernel] serial mouse driver patch = NOK

[Filip Navara]

Hi Gerard!

I think the problem is the enabling of mouse detection on COM2.  :(((
Can you try it with commented out #define SERMOUSE_COM2_SUPPORT at top 
of the sermouse.c file?

Thanks,
Filip

Gge wrote:

> Filip Navara wrote:
>
>> I have applied few changes from the supplied patch. Here is a list of 
>> what was applied
>> - Some of the formating changes (TABs/spaces)
>> - Don't set 'Output Line 2' bit while power-uping the mouse during 
>> initalization
>> - Restore 'Line Control' register at the end of mouse detection.
>> - Wait only 150000 millisecons (instead of 500000) for mouse power down.
>>
>> Additionaly I enabled the detecting of mouse on COM2 by default. The 
>> part of the patch for calling detection on COM1/COM2 port was wrong, 
>> because there can be two mice on both port. Also removing the 
>> SERMOUSE_COM[12]_SUPPORT defines isn't recommened yet, because the 
>> (old) mouse detection routine collide with kernel debugging over 
>> serial port.
>>
>> Can the users/developers with serial mouse test it now?
>>
>> Regards, Filip
>>
>> P.S. To Logan_V8_TT: I would be very interested if the new version 
>> works with your mouse or not. If you can, please let me know.
>>
>>
> Filip,
>
>
> I compiled the new sermouse.sys driver and ran it in real hardware..
> The serial mouse is connected on COM1 and DebugPort on Com2 ( this is 
> my current configuration which is working ok)
> The debug messages  stopped to be displayed  during the sermouse 
> driver initialization as indicated in the attached  debug traces
> The ros init  however continued upto the Desktop screen .
> The mouse  cursor is displayed but is not moving at all .
>
> Note ;  I have not made the test  with the mouse connected to com2  
> because it is supposed to work on com1 as well
>
> A confirmation is needed from another user/developper .
>
> Best regards
> Gerard
>
>
>
> ======================================================
> DriverBase for \SystemRoot\system32\drivers\serial.sys: cde69000
> (dbg/kdb_stabs.c:848) Loading driver 
> \SystemRoot\system32\drivers\serial.sys sym
> bols (driver @ cde69000)
> Serial Driver 0.0.2
> DriverBase for \SystemRoot\system32\drivers\sermouse.sys: cde7f000
> (dbg/kdb_stabs.c:848) Loading driver 
> \SystemRoot\system32\drivers\sermouse.sys s
> ymbols (driver @ cde7f000)
> Serial Mouse Driver 0.0.9
> Trying to find mouse on COM1
> Microsoft Mouse with 3-buttons detected
>
> End of Debug Messages   !!!
> ------------------------------------------------------------------------------------- 
>
>
> _______________________________________________
> Ros-kernel mailing list
> Ros-kernel at reactos.com
> http://reactos.com/mailman/listinfo/ros-kernel
>
>