[ros-kernel] latest cvs ISO boot failure...

[Casper Hornstrup]

Revision 1.54 breaks the VMware CD-ROM support.

Casper

> -----Original Message-----
> From: ros-kernel-bounces at reactos.com 
> [mailto:ros-kernel-bounces at reactos.com] On Behalf Of Hartmut Birr
> Sent: 25. september 2004 17:40
> To: 'ReactOS Kernel List'
> Subject: RE: [ros-kernel] latest cvs ISO boot failure...
> 
> Hi,
> 
> it seems that the vmware CDROM isn't an atapi device. An 
> atapi device must response with 0xeb/0x14 after a soft reset. 
> Do you know the last revision which has worked? I've looked 
> to the linux ide driver. Linux doesn't use the reset command 
> for detecting the devices. Linux uses first an ATA identify 
> command and if the drive does response with an error it sends 
> an ATAPI identify command. We should change the device 
> detection to this way. 
> 
> - Hartmut
> 
> > -----Original Message-----
> > From: ros-kernel-bounces at reactos.com
> > [mailto:ros-kernel-bounces at reactos.com] On Behalf Of Casper 
> Hornstrup
> > Sent: Saturday, September 25, 2004 4:04 PM
> > To: 'ReactOS Kernel List'
> > Subject: RE: [ros-kernel] latest cvs ISO boot failure...
> > 
> > 
> > This is a VMware VM.
> > Hard Disk 1 (IDE 0:0) (primary master) CD-ROM 1 (IDE 1:0) 
> (secondary 
> > master)
> > 
> > Output is:
> > 
> > DriverBase for atapi.sys: dcb18000
> >   Check drive 0: High 0xaa Low 0x55
> >   Check drive 1: High 0xaa Low 0x55
> >   Check drive 0: High 0xaa Low 0x55
> > 
> > Casper
> > 
> 
> 
> _______________________________________________
> Ros-kernel mailing list
> Ros-kernel at reactos.com
> http://reactos.com/mailman/listinfo/ros-kernel
>