Page 5 of 5
Posted: Mon Oct 24, 2011 2:57 pm
by hto
What is the bug number that you think is related?
6590. A regression after
revision 52446.
Here is the new debug log:
[…]
Pff, now it crashes in another unexpected place. Something goes wrong behind the scenes…
Re: ReactOS on eBox and embedded systems
Posted: Sat Nov 05, 2011 9:39 pm
by pbreneman
I am able to install and run ReactOS on a new version on my industrial board similar to an eBox!
The BIOS of the new version of the board has a selection where "Standard IDE Compatible" can be enabled.
Here is a zip with two debug logs that can be compared to show what ReactOS recognizes:
http://www.turbocontrol.com/RosDbgTermTwoBoards.zip
The LAN is not yet working with Ros and hopefully I can jump into that soon. But first I'll start another support message about the (general) serial port problems I'm having.
Thanks for all the help and suggestions.
Re: ReactOS on eBox and embedded systems
Posted: Mon Nov 07, 2011 3:25 pm
by vicmarcal
pbreneman wrote:I am able to install and run ReactOS on a new version on my industrial board similar to an eBox!
The BIOS of the new version of the board has a selection where "Standard IDE Compatible" can be enabled.
Here is a zip with two debug logs that can be compared to show what ReactOS recognizes:
http://www.turbocontrol.com/RosDbgTermTwoBoards.zip
The LAN is not yet working with Ros and hopefully I can jump into that soon. But first I'll start another support message about the (general) serial port problems I'm having.
Thanks for all the help and suggestions.
Open a Bugreport with the serial problems.And attach the debuglogs. It will be catch the attention of ReactOS devs
Re: ReactOS on eBox and embedded systems
Posted: Thu Nov 24, 2011 3:55 am
by pbreneman
Re: ReactOS on eBox and embedded systems
Posted: Sun Nov 27, 2011 9:25 pm
by EmuandCo
Hm, I have my problems with a embedded hardware too. A Fujitsu Siemens Futro A100 alias Teco TR2220 Device. Its a SIS 550 SOC with 64 MB RAM, IDE Port and normally a 32 mb CF Card as Master. Well, I plugged a 2.5'' 120 GB HDD and a DVD Drive in there and tried to install ROS. It even goes to the 2nd stage setup, but dies at the hardware installation. Sadly I was not able to get Screen Debugging run. I get 20 blocks on top when it should jump inside the Console again and these blocks change with every typing, seems like they are the console in a badly scrambled way. LOG File Debug just gives this:
http://www.reactos.org/paste/index.php/9595/
Re: ReactOS on eBox and embedded systems
Posted: Sat Dec 17, 2011 5:38 pm
by pbreneman
Just tried r54672 and PC locks up whenever the LAN cable is connected which is the same as before.
Re: ReactOS on eBox and embedded systems
Posted: Mon May 28, 2012 5:49 am
by pbreneman
I just installed and tested r56661 dbg and it all seems to work OK but crashes when I plug the LAN cable in. I captured a little of a debug log (below) but I'll try to gather more info soon. Please let me know if you have any ideas or suggestions.
Code: Select all
Boot took 15849399734 cycles!
Interrupts: 1915 System Calls: 15640 Context Switches: 1869
(/srv/buildbot_cmake/full_cmake/build/ntoskrnl/se/semgr.c:705) HACK: Should deny access for caller: granted 0x90003, desired 0x190003 (generic mapping B09089F8).
(/srv/buildbot_cmake/full_cmake/build/base/services/wlansvc/wlansvc.c:145) wlansvc: main() started
(/srv/buildbot_cmake/full_cmake/build/base/services/wlansvc/wlansvc.c:96) ServiceMain() called
(/srv/buildbot_cmake/full_cmake/build/base/services/wlansvc/wlansvc.c:130) ServiceMain() done
(/srv/buildbot_cmake/full_cmake/build/base/system/services/rpcserver.c:1721) RNotifyBootConfigStatus(00000000 1) called
Boot took 16801114441 cycles!
Interrupts: 2039 System Calls: 25118 Context Switches: 3860
(/srv/buildbot_cmake/full_cmake/build/ntoskrnl/se/semgr.c:705) HACK: Should deny access for caller: granted 0x0, desired 0x100000 (generic mapping B09089F8).
DHCPCSVC: DHCP service is starting up
(/srv/buildbot_cmake/full_cmake/build/base/services/umpnpmgr/umpnpmgr.c:3191) Removal pending: Root\*PNP0501\0000
(/srv/buildbot_cmake/full_cmake/build/base/services/umpnpmgr/umpnpmgr.c:3187) Removal vetoed: Root\*PNP0501\0000
(/srv/buildbot_cmake/full_cmake/build/lib/rtl/actctx.c:874) Unsupported yet language attribute (*)
Using shell hooks for notification of shell events.
WARNING: BackupRead at /srv/buildbot_cmake/full_cmake/build/dll/win32/kernel32/client/file/backup.c:34 is UNIMPLEMENTED!
WARNING: BackupRead at /srv/buildbot_cmake/full_cmake/build/dll/win32/kernel32/client/file/backup.c:34 is UNIMPLEMENTED!
(/srv/buildbot_cmake/full_cmake/build/ntoskrnl/mm/ARM3/pool.c:482) Paged pool expansion: 1 2
*** Fatal System Error: 0x0000007f
(0x00000008,0x00000000,0x00000000,0x00000000)
[7hEntered debugger on embedded INT3 at 0x0008:0x8091b918.
kdb:>
bt
Eip:
<NTOSKRNL.EXE:11b919 (/srv/buildbot_cmake/full_cmake/build/lib/rtl/i386/debug_asm.S:46 (_RtlpBreakWithStatusInstruction@0))>
Frames:
<NTOSKRNL.EXE:80441 (ReactOS/ntoskrnl/ke/bug.c:1081 (KeBugCheckWithTf@24))>
<NTOSKRNL.EXE:10090b (ReactOS/ntoskrnl/ke/i386/exp.c:1133 (@KiSystemFatalException@8))>
<NTOSKRNL.EXE:105f75 (ReactOS/ntoskrnl/ke/i386/traphdlr.c:824 (@KiTrap08Handler@4))>
<NTOSKRNL.EXE:1045ba (/srv/buildbot_cmake/full_cmake/build/ntoskrnl/ke/i386/trap.s:0 (_KiTrap08))>
<NTOSKRNL.EXE:815c0 (ReactOS/ntoskrnl/ke/dpc.c:718 (KeInsertQueueDpc@12))>
<ndis.sys:8984>
<NTOSKRNL.EXE:101c86 (ReactOS/include/crt/mingw32/intrin_x86.h:86 (@KiInterruptDispatch@8))>
<NTOSKRNL.EXE:101a76 (ReactOS/ntoskrnl/ke/i386/irqobj.c:312 (@KiInterruptTemplateHandler@8))>
*** Fatal System Error: 0x0000000a
(0x7FFBA00C,0xFFFFFFFF,0x00000000,0x80917BDC)
Entered debugger on embedded INT3 at 0x0008:0x8091b918.
Posted: Mon May 28, 2012 9:35 am
by hto
Bug 6686, probably.