[Ros-cis] [16037] ReactOS Publish Error

[ros-cis at reactos.com]

make bootcd failed: (error: boot\freeldr\freeldr\multiboot.c: In
function `FrLdrSetupPageDirectory':
boot\freeldr\freeldr\multiboot.c:325: warning: dereferencing type-punned
pointer will break strict-aliasing rules
boot\freeldr\freeldr\multiboot.c:328: warning: dereferencing type-punned
pointer will break strict-aliasing rules
boot\freeldr\freeldr\multiboot.c:383: warning: dereferencing type-punned
pointer will break strict-aliasing rules
boot\freeldr\freeldr\multiboot.c:393: warning: dereferencing type-punned
pointer will break strict-aliasing rules
boot\freeldr\freeldr\multiboot.c:402: warning: dereferencing type-punned
pointer will break strict-aliasing rules
boot\freeldr\freeldr\multiboot.c:415: warning: dereferencing type-punned
pointer will break strict-aliasing rules
boot\freeldr\freeldr\multiboot.c:426: warning: dereferencing type-punned
pointer will break strict-aliasing rules
boot\freeldr\freeldr\multiboot.c:462: warning: dereferencing type-punned
pointer will break strict-aliasing rules
boot\freeldr\freeldr\multiboot.c:472: warning: dereferencing type-punned
pointer will break strict-aliasing rules
boot\freeldr\freeldr\multiboot.c:481: warning: dereferencing type-punned
pointer will break strict-aliasing rules
boot\freeldr\freeldr\multiboot.c:494: warning: dereferencing type-punned
pointer will break strict-aliasing rules
drivers\lib\oskittcp\oskittcp\in_cksum.c: In function `in_cksum':
drivers\lib\oskittcp\oskittcp\in_cksum.c:140: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\in_cksum.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used drivers\lib\oskittcp\oskittcp\defaults.c:
In function `pfind': drivers\lib\oskittcp\oskittcp\defaults.c:49:
warning: implicit declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\defaults.c: In function `copyin':
drivers\lib\oskittcp\oskittcp\defaults.c:80: warning: implicit
declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\defaults.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used drivers\lib\oskittcp\oskittcp\in.c:59:
warning: 'in_mk' defined but not used
drivers\lib\oskittcp\oskittcp\in_pcb.c: In function `in_pcballoc':
drivers\lib\oskittcp\oskittcp\in_pcb.c:69: warning: implicit declaration
of function `fbsd_malloc' drivers\lib\oskittcp\oskittcp\in_pcb.c: In
function `in_pcbbind': drivers\lib\oskittcp\oskittcp\in_pcb.c:97:
warning: implicit declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\in_pcb.c:99: warning: implicit declaration
of function `OskitDumpBuffer' drivers\lib\oskittcp\oskittcp\in_pcb.c:92:
warning: unused variable `p' drivers\lib\oskittcp\oskittcp\in_pcb.c:95:
warning: unused variable `error' drivers\lib\oskittcp\oskittcp\in_pcb.c:
In function `in_pcbladdr': drivers\lib\oskittcp\oskittcp\in_pcb.c:211:
warning: unused variable `ifaddr'
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used drivers\lib\oskittcp\oskittcp\in_pcb.c:
In function `in_pcbconnect': drivers\lib\oskittcp\oskittcp\in_pcb.c:342:
warning: suggest parentheses around assignment used as truth value
drivers\lib\oskittcp\oskittcp\in_pcb.c: In function `in_pcbdetach':
drivers\lib\oskittcp\oskittcp\in_pcb.c:390: warning: implicit
declaration of function `fbsd_free'
drivers\lib\oskittcp\oskittcp\in_pcb.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\interface.c: In function `fbsd_malloc':
drivers\lib\oskittcp\oskittcp\interface.c:35: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\interface.c: In function `InitOskitTCP':
drivers\lib\oskittcp\oskittcp\interface.c:51: warning: implicit
declaration of function `raw_init'
drivers\lib\oskittcp\oskittcp\interface.c:55: warning: implicit
declaration of function `init_freebsd_sched'
drivers\lib\oskittcp\oskittcp\interface.c:57: warning: implicit
declaration of function `clock_init'
drivers\lib\oskittcp\oskittcp\interface.c: In function
`RegisterOskitTCPEventHandlers':
drivers\lib\oskittcp\oskittcp\interface.c:75: warning: implicit
declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\interface.c: In function
`OskitDumpBuffer': drivers\lib\oskittcp\oskittcp\interface.c:95:
warning: implicit declaration of function `_snprintf'
drivers\lib\oskittcp\oskittcp\interface.c:101: warning: implicit
declaration of function `isprint'
drivers\lib\oskittcp\oskittcp\interface.c: In function `OskitTCPRecv':
drivers\lib\oskittcp\oskittcp\interface.c:136: warning: unused variable
`output_ptr' drivers\lib\oskittcp\oskittcp\interface.c:141: warning:
unused variable `tocopy' drivers\lib\oskittcp\oskittcp\interface.c: In
function `OskitTCPBind': drivers\lib\oskittcp\oskittcp\interface.c:196:
warning: missing braces around initializer
drivers\lib\oskittcp\oskittcp\interface.c:196: warning: (near
initialization for `sabuf.m_hdr')
drivers\lib\oskittcp\oskittcp\interface.c: In function
`OskitTCPConnect': drivers\lib\oskittcp\oskittcp\interface.c:223:
warning: missing braces around initializer
drivers\lib\oskittcp\oskittcp\interface.c:223: warning: (near
initialization for `sabuf.m_hdr')
drivers\lib\oskittcp\oskittcp\interface.c:221: warning: unused variable
`uap' drivers\lib\oskittcp\oskittcp\interface.c:222: warning: unused
variable `s' drivers\lib\oskittcp\oskittcp\interface.c: In function
`OskitTCPShutdown': drivers\lib\oskittcp\oskittcp\interface.c:267:
warning: unused variable `so' drivers\lib\oskittcp\oskittcp\interface.c:
At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\interface.c:176: warning: 'getsockaddr'
defined but not used drivers\lib\oskittcp\oskittcp\kern_clock.c: In
function `timeout': drivers\lib\oskittcp\oskittcp\kern_clock.c:198:
warning: implicit declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\kern_clock.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used drivers\lib\oskittcp\oskittcp\ip_input.c:
In function `ip_stripoptions':
drivers\lib\oskittcp\oskittcp\ip_input.c:116: warning: implicit
declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\ip_output.c: In function `ip_output':
drivers\lib\oskittcp\oskittcp\ip_output.c:365: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\ip_input.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\ip_output.c:512: warning: suggest explicit
braces to avoid ambiguous `else'
drivers\lib\oskittcp\oskittcp\ip_output.c:343: warning: label `sendit'
defined but not used drivers\lib\oskittcp\oskittcp\ip_output.c:84:
warning: 'ifp' might be used uninitialized in this function
drivers\lib\oskittcp\oskittcp\ip_output.c: In function
`ip_insertoptions': drivers\lib\oskittcp\oskittcp\ip_output.c:555:
warning: implicit declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\ip_output.c: In function `ip_pcbopts':
drivers\lib\oskittcp\oskittcp\ip_output.c:776: warning: type defaults to
`int' in declaration of `cnt'
drivers\lib\oskittcp\oskittcp\ip_output.c:776: warning: type defaults to
`int' in declaration of `optlen'
drivers\lib\oskittcp\oskittcp\ip_output.c: In function `ip_setmoptions':
drivers\lib\oskittcp\oskittcp\ip_output.c:878: warning: unused variable
`loop' drivers\lib\oskittcp\oskittcp\ip_output.c:879: warning: unused
variable `i' drivers\lib\oskittcp\oskittcp\ip_output.c:880: warning:
unused variable `addr' drivers\lib\oskittcp\oskittcp\ip_output.c:881:
warning: unused variable `mreq'
drivers\lib\oskittcp\oskittcp\ip_output.c:882: warning: unused variable
`ifp' drivers\lib\oskittcp\oskittcp\ip_output.c:884: warning: unused
variable `ro' drivers\lib\oskittcp\oskittcp\ip_output.c:885: warning:
unused variable `dst' drivers\lib\oskittcp\oskittcp\ip_output.c:886:
warning: unused variable `s' drivers\lib\oskittcp\oskittcp\ip_output.c:
In function `ip_getmoptions':
drivers\lib\oskittcp\oskittcp\ip_output.c:1152: warning: unused variable
`ttl' drivers\lib\oskittcp\oskittcp\ip_output.c:1153: warning: unused
variable `loop' drivers\lib\oskittcp\oskittcp\ip_output.c:1154: warning:
unused variable `addr' drivers\lib\oskittcp\oskittcp\ip_output.c:1155:
warning: unused variable `ia' drivers\lib\oskittcp\oskittcp\ip_output.c:
At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\ip_output.c:67: warning: 'ip_mloopback'
declared `static' but never defined
drivers\lib\oskittcp\oskittcp\kern_subr.c: In function `uiomove':
drivers\lib\oskittcp\oskittcp\kern_subr.c:89: warning: implicit
declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\kern_subr.c: In function `ureadc':
drivers\lib\oskittcp\oskittcp\kern_subr.c:118: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\kern_subr.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used drivers\lib\oskittcp\oskittcp\radix.c: In
function `rn_addmask': drivers\lib\oskittcp\oskittcp\radix.c:414:
warning: implicit declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\radix.c: In function `rn_init':
drivers\lib\oskittcp\oskittcp\radix.c:998: warning: implicit declaration
of function `DbgPrint'
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used drivers\lib\oskittcp\oskittcp\raw_ip.c:
In function `rip_input': drivers\lib\oskittcp\oskittcp\raw_ip.c:106:
warning: implicit declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\raw_ip.c: In function `rip_output':
drivers\lib\oskittcp\oskittcp\raw_ip.c:159: warning: unused variable
`opts' drivers\lib\oskittcp\oskittcp\raw_usrreq.c: In function
`raw_usrreq': drivers\lib\oskittcp\oskittcp\raw_usrreq.c:293: warning:
implicit declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\raw_usrreq.c:308: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\raw_usrreq.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used drivers\lib\oskittcp\oskittcp\raw_ip.c:
At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used drivers\lib\oskittcp\oskittcp\rtsock.c:
In function `route_output': drivers\lib\oskittcp\oskittcp\rtsock.c:149:
warning: implicit declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\rtsock.c:210: warning: suggest parentheses
around assignment used as truth value
drivers\lib\oskittcp\oskittcp\rtsock.c:240: warning: implicit
declaration of function `memcpy' drivers\lib\oskittcp\oskittcp\route.c:
In function `rtfree': drivers\lib\oskittcp\oskittcp\route.c:156:
warning: implicit declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\route.c: In function `rtrequest':
drivers\lib\oskittcp\oskittcp\route.c:472: warning: implicit declaration
of function `memcpy' drivers\lib\oskittcp\oskittcp\route.c:388: warning:
unused variable `prflags' drivers\lib\oskittcp\oskittcp\sleep.c: In
function `tsleep': drivers\lib\oskittcp\oskittcp\sleep.c:14: warning:
implicit declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\sleep.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used drivers\lib\oskittcp\oskittcp\route.c: At
top level: drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133:
warning: 'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\route.c:566: warning: 'rt_fixdelete'
defined but not used drivers\lib\oskittcp\oskittcp\rtsock.c: At top
level: drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133:
warning: 'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\tcp_input.c: In function `tcp_reass':
drivers\lib\oskittcp\oskittcp\tcp_input.c:222: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\tcp_input.c: In function `tcp_input':
drivers\lib\oskittcp\oskittcp\tcp_input.c:519: warning: suggest
parentheses around && within ||
drivers\lib\oskittcp\oskittcp\tcp_output.c: In function `tcp_output':
drivers\lib\oskittcp\oskittcp\tcp_output.c:88: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\tcp_output.c:337: warning: implicit
declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\tcp_subr.c: In function `tcp_init':
drivers\lib\oskittcp\oskittcp\tcp_subr.c:100: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\tcp_subr.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\tcp_output.c: In function
`tcp_setpersist': drivers\lib\oskittcp\oskittcp\tcp_output.c:783:
warning: type defaults to `int' in declaration of `t'
drivers\lib\oskittcp\oskittcp\tcp_output.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\tcp_input.c: In function `tcp_dooptions':
drivers\lib\oskittcp\oskittcp\tcp_input.c:1756: warning: implicit
declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\tcp_input.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\tcp_debug.c: In function `tcp_trace':
drivers\lib\oskittcp\oskittcp\tcp_debug.c:86: warning: unused variable
`seq' drivers\lib\oskittcp\oskittcp\tcp_debug.c:86: warning: unused
variable `ack' drivers\lib\oskittcp\oskittcp\tcp_debug.c:87: warning:
unused variable `len' drivers\lib\oskittcp\oskittcp\tcp_debug.c:87:
warning: unused variable `flags'
drivers\lib\oskittcp\oskittcp\tcp_debug.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\tcp_usrreq.c: In function `tcp_usrreq':
drivers\lib\oskittcp\oskittcp\tcp_usrreq.c:391: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\tcp_usrreq.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\uipc_socket.c: In function `socreate':
drivers\lib\oskittcp\oskittcp\uipc_socket.c:74: warning: unused variable
`p' drivers\lib\oskittcp\oskittcp\uipc_socket.c: In function `sofree':
drivers\lib\oskittcp\oskittcp\uipc_socket.c:154: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\uipc_socket.c: In function `sosend':
drivers\lib\oskittcp\oskittcp\uipc_socket.c:338: warning: unused
variable `p' drivers\lib\oskittcp\oskittcp\uipc_socket.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\uipc_mbuf.c: In function `mbinit':
drivers\lib\oskittcp\oskittcp\uipc_mbuf.c:90: warning: implicit
declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\uipc_mbuf.c: In function `m_clalloc':
drivers\lib\oskittcp\oskittcp\uipc_mbuf.c:104: warning: unused variable
`logged' drivers\lib\oskittcp\oskittcp\uipc_mbuf.c: In function
`m_copym': drivers\lib\oskittcp\oskittcp\uipc_mbuf.c:373: warning:
implicit declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\uipc_mbuf.c: In function `m_adj':
drivers\lib\oskittcp\oskittcp\uipc_mbuf.c:459: warning: type defaults to
`int' in declaration of `count'
drivers\lib\oskittcp\oskittcp\uipc_mbuf.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used
drivers\lib\oskittcp\oskittcp\uipc_socket2.c: In function
`soisconnecting': drivers\lib\oskittcp\oskittcp\uipc_socket2.c:100:
warning: implicit declaration of function `DbgPrint'
drivers\lib\oskittcp\oskittcp\uipc_socket2.c: In function
`sbappendaddr': drivers\lib\oskittcp\oskittcp\uipc_socket2.c:631:
warning: implicit declaration of function `memcpy'
drivers\lib\oskittcp\oskittcp\uipc_socket2.c: At top level:
drivers/lib/oskittcp/include/freebsd/src/sys/sys/systm.h:133: warning:
'bsd_log' defined but not used {standard input}: Assembler messages:
{standard input}:2690: Warning: Ignoring changed section attributes for
.text {standard input}: Assembler messages: {standard input}:3671:
Warning: Ignoring changed section attributes for .text {standard input}:
Assembler messages: {standard input}:4290: Warning: Ignoring changed
section attributes for .text {standard input}: Assembler messages:
{standard input}:4290: Warning: Ignoring changed section attributes for
.text lib\kbdda\kbdda.c:11: warning: ignoring #pragma data_seg
lib\kbdda\kbdda.c:204: warning: missing braces around initializer
lib\kbdda\kbdda.c:204: warning: (near initialization for
`modifier_bits[0]') lib\kbdda\kbdda.c:215: warning: missing braces
around initializer lib\kbdda\kbdda.c:215: warning: (near initialization
for `key_to_chars_2mod[0].wch') lib\kbdda\kbdda.c:269: warning: missing
braces around initializer lib\kbdda\kbdda.c:269: warning: (near
initialization for `key_to_chars_3mod[0].wch') lib\kbdda\kbdda.c:283:
warning: missing braces around initializer lib\kbdda\kbdda.c:283:
warning: (near initialization for `key_to_chars_4mod[0].wch')
lib\kbdda\kbdda.c:305: warning: missing braces around initializer
lib\kbdda\kbdda.c:305: warning: (near initialization for
`key_to_chars_5mod[0].wch') lib\kbdda\kbdda.c:310: warning: missing
braces around initializer lib\kbdda\kbdda.c:310: warning: (near
initialization for `keypad_numbers[0].wch') lib\kbdfr\kbdfr.c:15:
warning: ignoring #pragma data_seg lib\kbdfr\kbdfr.c:186: warning:
missing braces around initializer lib\kbdfr\kbdfr.c:186: warning: (near
initialization for `modifier_bits[0]') lib\kbdfr\kbdfr.c:199: warning:
missing braces around initializer lib\kbdfr\kbdfr.c:199: warning: (near
initialization for `key_to_chars_2mod[0].wch') lib\kbdfr\kbdfr.c:264:
warning: missing braces around initializer lib\kbdfr\kbdfr.c:264:
warning: (near initialization for `key_to_chars_3mod[0].wch')
lib\kbdes\kbdes.c:23: warning: ignoring #pragma data_seg
lib\kbdes\kbdes.c:279: warning: missing braces around initializer
lib\kbdes\kbdes.c:279: warning: (near initialization for
`modifier_bits[0]') lib\kbdes\kbdes.c:292: warning: missing braces
around initializer lib\kbdes\kbdes.c:292: warning: (near initialization
for `key_to_chars_2mod[0].wch') lib\kbdfr\kbdfr.c:274: warning: missing
braces around initializer lib\kbdfr\kbdfr.c:274: warning: (near
initialization for `key_to_chars_4mod[0].wch') lib\kbdfr\kbdfr.c:296:
warning: missing braces around initializer lib\kbdfr\kbdfr.c:296:
warning: (near initialization for `key_to_chars_5mod[0].wch')
lib\kbdfr\kbdfr.c:303: warning: missing braces around initializer
lib\kbdfr\kbdfr.c:303: warning: (near initialization for
`keypad_numbers[0].wch') lib\kbdes\kbdes.c:354: warning: missing braces
around initializer lib\kbdes\kbdes.c:354: warning: (near initialization
for `key_to_chars_3mod[0].wch') lib\kbdes\kbdes.c:361: warning: missing
braces around initializer lib\kbdes\kbdes.c:361: warning: (near
initialization for `key_to_chars_4mod[0].wch') lib\kbdes\kbdes.c:382:
warning: missing braces around initializer lib\kbdes\kbdes.c:382:
warning: (near initialization for `keypad_numbers[0].wch')
lib\kbdes\kbdes.c:541: warning: 'dead_key_names' defined but not used
lib\kbddv\kbddv.c:16: warning: ignoring #pragma data_seg
lib\kbddv\kbddv.c:168: warning: missing braces around initializer
lib\kbddv\kbddv.c:168: warning: (near initialization for
`modifier_bits[0]') lib\kbddv\kbddv.c:179: warning: missing braces
around initializer lib\kbddv\kbddv.c:179: warning: (near initialization
for `key_to_chars_2mod[0].wch') lib\kbddv\kbddv.c:242: warning: missing
braces around initializer lib\kbddv\kbddv.c:242: warning: (near
initialization for `key_to_chars_3mod[0].wch') lib\kbddv\kbddv.c:252:
warning: missing braces around initializer lib\kbddv\kbddv.c:252:
warning: (near initialization for `key_to_chars_4mod[0].wch')
lib\kbddv\kbddv.c:259: warning: missing braces around initializer
lib\kbddv\kbddv.c:259: warning: (near initialization for
`keypad_numbers[0].wch') lib\kbdse\kbdse.c:16: warning: ignoring #pragma
data_seg lib\kbdse\kbdse.c:209: warning: missing braces around
initializer lib\kbdse\kbdse.c:209: warning: (near initialization for
`modifier_bits[0]') lib\kbdse\kbdse.c:220: warning: missing braces
around initializer lib\kbdse\kbdse.c:220: warning: (near initialization
for `key_to_chars_2mod[0].wch') lib\kbdse\kbdse.c:273: warning: missing
braces around initializer lib\kbdse\kbdse.c:273: warning: (near
initialization for `key_to_chars_3mod[0].wch') lib\kbdse\kbdse.c:290:
warning: missing braces around initializer lib\kbdse\kbdse.c:290:
warning: (near initialization for `key_to_chars_4mod[0].wch')
lib\kbdse\kbdse.c:308: warning: missing braces around initializer
lib\kbdse\kbdse.c:308: warning: (near initialization for
`key_to_chars_5mod[0].wch') lib\kbdse\kbdse.c:313: warning: missing
braces around initializer lib\kbdse\kbdse.c:313: warning: (near
initialization for `keypad_numbers[0].wch') lib\kbdgr\kbdgr.c:16:
warning: ignoring #pragma data_seg lib\kbdgr\kbdgr.c:209: warning:
missing braces around initializer lib\kbdgr\kbdgr.c:209: warning: (near
initialization for `modifier_bits[0]') lib\kbdgr\kbdgr.c:218: warning:
missing braces around initializer lib\kbdgr\kbdgr.c:218: warning: (near
initialization for `key_to_chars_2mod[0].wch') lib\kbdgr\kbdgr.c:274:
warning: missing braces around initializer lib\kbdgr\kbdgr.c:274:
warning: (near initialization for `key_to_chars_3mod[0].wch')
lib\kbdgr\kbdgr.c:290: warning: missing braces around initializer
lib\kbdgr\kbdgr.c:290: warning: (near initialization for
`key_to_chars_4mod[0].wch') lib\kbdgr\kbdgr.c:303: warning: missing
braces around initializer lib\kbdgr\kbdgr.c:303: warning: (near
initialization for `key_to_chars_5mod[0].wch') lib\kbdgr\kbdgr.c:310:
warning: missing braces around initializer lib\kbdgr\kbdgr.c:310:
warning: (near initialization for `keypad_numbers[0].wch')
lib\kbdru\kbdru.c:17: warning: ignoring #pragma data_seg
lib\kbdru\kbdru.c:213: warning: missing braces around initializer
lib\kbdru\kbdru.c:213: warning: (near initialization for
`modifier_bits[0]') lib\kbdru\kbdru.c:222: warning: missing braces
around initializer lib\kbdru\kbdru.c:222: warning: (near initialization
for `key_to_chars_2mod[0].wch') lib\kbdru\kbdru.c:285: warning: missing
braces around initializer lib\kbdru\kbdru.c:285: warning: (near
initialization for `key_to_chars_3mod[0].wch') lib\kbdru\kbdru.c:298:
warning: missing braces around initializer lib\kbdru\kbdru.c:298:
warning: (near initialization for `key_to_chars_4mod[0].wch')
lib\kbdru\kbdru.c:305: warning: missing braces around initializer
lib\kbdru\kbdru.c:305: warning: (near initialization for
`keypad_numbers[0].wch') lib\kbdus\kbdus.c:16: warning: ignoring #pragma
data_seg lib\kbdus\kbdus.c:168: warning: missing braces around
initializer lib\kbdus\kbdus.c:168: warning: (near initialization for
`modifier_bits[0]') lib\kbdus\kbdus.c:179: warning: missing braces
around initializer lib\kbdus\kbdus.c:179: warning: (near initialization
for `key_to_chars_2mod[0].wch') lib\kbdus\kbdus.c:242: warning: missing
braces around initializer lib\kbdus\kbdus.c:242: warning: (near
initialization for `key_to_chars_3mod[0].wch') lib\kbdus\kbdus.c:252:
warning: missing braces around initializer lib\kbdus\kbdus.c:252:
warning: (near initialization for `key_to_chars_4mod[0].wch')
lib\kbdus\kbdus.c:259: warning: missing braces around initializer
lib\kbdus\kbdus.c:259: warning: (near initialization for
`keypad_numbers[0].wch') lib\kbdsg\kbdsg.c:18: warning: ignoring #pragma
data_seg lib\kbdsg\kbdsg.c:211: warning: missing braces around
initializer lib\kbdsg\kbdsg.c:211: warning: (near initialization for
`modifier_bits[0]') lib\kbdsg\kbdsg.c:227: warning: missing braces
around initializer lib\kbdsg\kbdsg.c:227: warning: (near initialization
for `key_to_chars_2mod[0].wch') lib\kbdsg\kbdsg.c:280: warning: missing
braces around initializer lib\kbdsg\kbdsg.c:280: warning: (near
initialization for `key_to_chars_3mod[0].wch') lib\kbdsg\kbdsg.c:293:
warning: missing braces around initializer lib\kbdsg\kbdsg.c:293:
warning: (near initialization for `key_to_chars_4mod[0].wch')
lib\kbdsg\kbdsg.c:303: warning: missing braces around initializer
lib\kbdsg\kbdsg.c:303: warning: (near initialization for
`key_to_chars_5mod[0].wch') lib\kbdsg\kbdsg.c:321: warning: missing
braces around initializer lib\kbdsg\kbdsg.c:321: warning: (near
initialization for `keypad_numbers[0].wch') lib\kbduk\kbduk.c:16:
warning: ignoring #pragma data_seg lib\kbduk\kbduk.c:172: warning:
missing braces around initializer lib\kbduk\kbduk.c:172: warning: (near
initialization for `modifier_bits[0]') lib\kbduk\kbduk.c:183: warning:
missing braces around initializer lib\kbduk\kbduk.c:183: warning: (near
initialization for `key_to_chars_2mod[0].wch') lib\kbduk\kbduk.c:238:
warning: missing braces around initializer lib\kbduk\kbduk.c:238:
warning: (near initialization for `key_to_chars_3mod[0].wch')
lib\kbduk\kbduk.c:250: warning: missing braces around initializer
lib\kbduk\kbduk.c:250: warning: (near initialization for
`key_to_chars_4mod[0].wch') lib\kbduk\kbduk.c:259: warning: missing
braces around initializer lib\kbduk\kbduk.c:259: warning: (near
initialization for `key_to_chars_5mod[0].wch') lib\kbduk\kbduk.c:267:
warning: missing braces around initializer lib\kbduk\kbduk.c:267:
warning: (near initialization for `key_to_chars_6mod[0].wch')
lib\kbduk\kbduk.c:276: warning: missing braces around initializer
lib\kbduk\kbduk.c:276: warning: (near initialization for
`keypad_numbers[0].wch') drivers\bus\acpi\ospm\osl.c: In function
`acpi_os_vprintf': drivers\bus\acpi\ospm\osl.c:104: warning: implicit
declaration of function `vsprintf' drivers\bus\acpi\ospm\fdo.c: In
function `AcpiCreateDeviceIDString': drivers\bus\acpi\ospm\fdo.c:60:
warning: implicit declaration of function `swprintf'
drivers\bus\acpi\ospm\fdo.c: In function `AcpiCreateResourceList':
drivers\bus\acpi\ospm\fdo.c:308: warning: implicit declaration of
function `acpi_rs_dump_resource_list' drivers\bus\acpi\ospm\fdo.c:165:
warning: enumeration value `start_dependent_functions' not handled in
switch drivers\bus\acpi\ospm\fdo.c:165: warning: enumeration value
`end_dependent_functions' not handled in switch
drivers\bus\acpi\ospm\fdo.c:165: warning: enumeration value `fixed_io'
not handled in switch drivers\bus\acpi\ospm\fdo.c:165: warning:
enumeration value `vendor_specific' not handled in switch
drivers\bus\acpi\ospm\fdo.c:165: warning: enumeration value `memory24'
not handled in switch drivers\bus\acpi\ospm\fdo.c:165: warning:
enumeration value `memory32' not handled in switch
drivers\bus\acpi\ospm\fdo.c:165: warning: enumeration value
`fixed_memory32' not handled in switch drivers\bus\acpi\ospm\fdo.c:165:
warning: enumeration value `address16' not handled in switch
drivers\bus\acpi\ospm\fdo.c:165: warning: enumeration value `address32'
not handled in switch drivers\bus\acpi\ospm\fdo.c:165: warning:
enumeration value `extended_irq' not handled in switch
drivers\bus\acpi\ospm\fdo.c:304: warning: enumeration value
`start_dependent_functions' not handled in switch
drivers\bus\acpi\ospm\fdo.c:304: warning: enumeration value
`end_dependent_functions' not handled in switch
drivers\bus\acpi\ospm\fdo.c:304: warning: enumeration value `fixed_io'
not handled in switch drivers\bus\acpi\ospm\fdo.c:304: warning:
enumeration value `vendor_specific' not handled in switch
drivers\bus\acpi\ospm\fdo.c:304: warning: enumeration value `memory24'
not handled in switch drivers\bus\acpi\ospm\fdo.c:304: warning:
enumeration value `memory32' not handled in switch
drivers\bus\acpi\ospm\fdo.c:304: warning: enumeration value
`fixed_memory32' not handled in switch drivers\bus\acpi\ospm\fdo.c:304:
warning: enumeration value `address16' not handled in switch
drivers\bus\acpi\ospm\fdo.c:304: warning: enumeration value `address32'
not handled in switch drivers\bus\acpi\ospm\fdo.c:304: warning:
enumeration value `extended_irq' not handled in switch
drivers\bus\acpi\ospm\fdo.c: In function `FdoQueryBusRelations':
drivers\bus\acpi\ospm\fdo.c:323: warning: unused variable `AnsiString'
drivers\bus\acpi\ospm\fdo.c: At top level:
drivers\bus\acpi\ospm\fdo.c:479: warning: 'ACPIPrintInfo' defined but
not used {standard input}: Assembler messages: {standard input}:1561:
Warning: Ignoring changed section attributes for .text {standard input}:
Assembler messages: {standard input}:1562: Warning: Ignoring changed
section attributes for .text {standard input}: Assembler messages:
{standard input}:1562: Warning: Ignoring changed section attributes for
.text {standard input}: Assembler messages: {standard input}:1593:
Warning: Ignoring changed section attributes for .text In file included
from hal\halx86\up\halinit_up.c:15:
hal/halx86/generic/../include/hal.h:12: error: syntax error before
"FASTCALL" hal/halx86/generic/../include/hal.h:12: error: syntax error
before "LoaderBlock" hal/halx86/generic/../include/hal.h:12: warning:
type defaults to `int' in declaration of `HalInitializeDisplay'
hal/halx86/generic/../include/hal.h:12: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:13: error:
syntax error before "FASTCALL" hal/halx86/generic/../include/hal.h:13:
error: syntax error before "CharAttribute"
hal/halx86/generic/../include/hal.h:13: warning: type defaults to `int'
in declaration of `HalClearDisplay'
hal/halx86/generic/../include/hal.h:13: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:16: error:
syntax error before "STDCALL" hal/halx86/generic/../include/hal.h:16:
error: syntax error before "NumberOfMapRegisters"
hal/halx86/generic/../include/hal.h:16: warning: type defaults to `int'
in declaration of `HalpAllocateAdapterEx'
hal/halx86/generic/../include/hal.h:16: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:19: error:
syntax error before "HalpInitBusHandlers"
hal/halx86/generic/../include/hal.h:19: warning: type defaults to `int'
in declaration of `HalpInitBusHandlers'
hal/halx86/generic/../include/hal.h:19: warning: parameter names
(without types) in function declaration
hal/halx86/generic/../include/hal.h:19: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:22: error:
syntax error before "HalpInitPICs"
hal/halx86/generic/../include/hal.h:22: warning: type defaults to `int'
in declaration of `HalpInitPICs' hal/halx86/generic/../include/hal.h:22:
warning: parameter names (without types) in function declaration
hal/halx86/generic/../include/hal.h:22: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:25: error:
syntax error before "HalpCalibrateStallExecution"
hal/halx86/generic/../include/hal.h:25: warning: type defaults to `int'
in declaration of `HalpCalibrateStallExecution'
hal/halx86/generic/../include/hal.h:25: warning: parameter names
(without types) in function declaration
hal/halx86/generic/../include/hal.h:25: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:28: error:
syntax error before "HalpInitPciBus"
hal/halx86/generic/../include/hal.h:28: warning: type defaults to `int'
in declaration of `HalpInitPciBus'
hal/halx86/generic/../include/hal.h:28: warning: parameter names
(without types) in function declaration
hal/halx86/generic/../include/hal.h:28: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:31: error:
syntax error before "HalpStartEnumerator"
hal/halx86/generic/../include/hal.h:31: warning: type defaults to `int'
in declaration of `HalpStartEnumerator'
hal/halx86/generic/../include/hal.h:31: warning: parameter names
(without types) in function declaration
hal/halx86/generic/../include/hal.h:31: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:34: error:
syntax error before "HalpInitDma"
hal/halx86/generic/../include/hal.h:34: warning: type defaults to `int'
in declaration of `HalpInitDma' hal/halx86/generic/../include/hal.h:34:
warning: parameter names (without types) in function declaration
hal/halx86/generic/../include/hal.h:34: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:37: error:
syntax error before "HalpMapPhysMemory"
hal/halx86/generic/../include/hal.h:37: error: syntax error before
"PhysAddr" hal/halx86/generic/../include/hal.h:37: warning: type
defaults to `int' in declaration of `HalpMapPhysMemory'
hal/halx86/generic/../include/hal.h:37: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:40: error:
syntax error before "HalpInitPhase0"
hal/halx86/generic/../include/hal.h:40: warning: type defaults to `int'
in declaration of `HalpInitPhase0'
hal/halx86/generic/../include/hal.h:40: warning: parameter names
(without types) in function declaration
hal/halx86/generic/../include/hal.h:40: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:61: error:
syntax error before "UCHAR" hal/halx86/generic/../include/hal.h:61:
warning: no semicolon at end of struct or union
hal/halx86/generic/../include/hal.h:62: warning: type defaults to `int'
in declaration of `Channel2' hal/halx86/generic/../include/hal.h:62:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:63: error: syntax error before
"Channel3" hal/halx86/generic/../include/hal.h:63: warning: type
defaults to `int' in declaration of `Channel3'
hal/halx86/generic/../include/hal.h:63: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:64: error:
syntax error before "Channel1" hal/halx86/generic/../include/hal.h:64:
warning: type defaults to `int' in declaration of `Channel1'
hal/halx86/generic/../include/hal.h:64: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:65: error:
syntax error before "Reserved2" hal/halx86/generic/../include/hal.h:65:
warning: type defaults to `int' in declaration of `Reserved2'
hal/halx86/generic/../include/hal.h:65: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:66: error:
syntax error before "Channel0" hal/halx86/generic/../include/hal.h:66:
warning: type defaults to `int' in declaration of `Channel0'
hal/halx86/generic/../include/hal.h:66: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:67: error:
syntax error before "Reserved3" hal/halx86/generic/../include/hal.h:67:
warning: type defaults to `int' in declaration of `Reserved3'
hal/halx86/generic/../include/hal.h:67: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:68: error:
syntax error before "Channel6" hal/halx86/generic/../include/hal.h:68:
warning: type defaults to `int' in declaration of `Channel6'
hal/halx86/generic/../include/hal.h:68: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:69: error:
syntax error before "Channel7" hal/halx86/generic/../include/hal.h:69:
warning: type defaults to `int' in declaration of `Channel7'
hal/halx86/generic/../include/hal.h:69: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:70: error:
syntax error before "Channel5" hal/halx86/generic/../include/hal.h:70:
warning: type defaults to `int' in declaration of `Channel5'
hal/halx86/generic/../include/hal.h:70: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:71: error:
syntax error before "Reserved4" hal/halx86/generic/../include/hal.h:71:
warning: type defaults to `int' in declaration of `Reserved4'
hal/halx86/generic/../include/hal.h:71: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:72: error:
syntax error before "Channel4" hal/halx86/generic/../include/hal.h:72:
warning: type defaults to `int' in declaration of `Channel4'
hal/halx86/generic/../include/hal.h:72: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:73: warning:
type defaults to `int' in declaration of `DMA_PAGE'
hal/halx86/generic/../include/hal.h:73: warning: type defaults to `int'
in declaration of `PDMA_PAGE' hal/halx86/generic/../include/hal.h:73:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:91: error: syntax error before
"UCHAR" hal/halx86/generic/../include/hal.h:91: warning: no semicolon at
end of struct or union hal/halx86/generic/../include/hal.h:94: warning:
type defaults to `int' in declaration of `DMA_CHANNEL_MASK'
hal/halx86/generic/../include/hal.h:94: warning: type defaults to `int'
in declaration of `PDMA_CHANNEL_MASK'
hal/halx86/generic/../include/hal.h:94: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:121: error:
syntax error before "UCHAR" hal/halx86/generic/../include/hal.h:121:
warning: no semicolon at end of struct or union
hal/halx86/generic/../include/hal.h:126: warning: type defaults to `int'
in declaration of `DMA_MODE' hal/halx86/generic/../include/hal.h:126:
warning: type defaults to `int' in declaration of `PDMA_MODE'
hal/halx86/generic/../include/hal.h:126: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:155: error:
syntax error before "UCHAR" hal/halx86/generic/../include/hal.h:155:
warning: no semicolon at end of struct or union
hal/halx86/generic/../include/hal.h:160: warning: type defaults to `int'
in declaration of `DMA_EXTENDED_MODE'
hal/halx86/generic/../include/hal.h:160: warning: type defaults to `int'
in declaration of `PDMA_EXTENDED_MODE'
hal/halx86/generic/../include/hal.h:160: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:176: error:
syntax error before "UCHAR" hal/halx86/generic/../include/hal.h:176:
warning: no semicolon at end of struct or union
hal/halx86/generic/../include/hal.h:177: warning: type defaults to `int'
in declaration of `ChannelMid' hal/halx86/generic/../include/hal.h:177:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:178: error: syntax error before
"ChannelHigh" hal/halx86/generic/../include/hal.h:178: warning: type
defaults to `int' in declaration of `ChannelHigh'
hal/halx86/generic/../include/hal.h:178: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:179: error:
syntax error before "Reserved" hal/halx86/generic/../include/hal.h:179:
warning: type defaults to `int' in declaration of `Reserved'
hal/halx86/generic/../include/hal.h:179: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:180: warning:
type defaults to `int' in declaration of `DMA_CHANNEL_STOP'
hal/halx86/generic/../include/hal.h:180: warning: type defaults to `int'
in declaration of `PDMA_CHANNEL_STOP'
hal/halx86/generic/../include/hal.h:180: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:201: error:
syntax error before "UCHAR" hal/halx86/generic/../include/hal.h:201:
warning: no semicolon at end of struct or union
hal/halx86/generic/../include/hal.h:202: warning: type defaults to `int'
in declaration of `DmaBaseCount'
hal/halx86/generic/../include/hal.h:202: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:203: warning:
type defaults to `int' in declaration of `DMA1_ADDRESS_COUNT'
hal/halx86/generic/../include/hal.h:203: warning: type defaults to `int'
in declaration of `PDMA1_ADDRESS_COUNT'
hal/halx86/generic/../include/hal.h:203: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:206: error:
syntax error before "UCHAR" hal/halx86/generic/../include/hal.h:206:
warning: no semicolon at end of struct or union
hal/halx86/generic/../include/hal.h:207: warning: type defaults to `int'
in declaration of `Reserved1' hal/halx86/generic/../include/hal.h:207:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:208: error: syntax error before
"DmaBaseCount" hal/halx86/generic/../include/hal.h:208: warning: type
defaults to `int' in declaration of `DmaBaseCount'
hal/halx86/generic/../include/hal.h:208: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:209: error:
syntax error before "Reserved2" hal/halx86/generic/../include/hal.h:209:
warning: type defaults to `int' in declaration of `Reserved2'
hal/halx86/generic/../include/hal.h:209: error: conflicting types for
'Reserved2' hal/halx86/generic/../include/hal.h:65: error: previous
declaration of 'Reserved2' was here
hal/halx86/generic/../include/hal.h:209: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:210: warning:
type defaults to `int' in declaration of `DMA2_ADDRESS_COUNT'
hal/halx86/generic/../include/hal.h:210: warning: type defaults to `int'
in declaration of `PDMA2_ADDRESS_COUNT'
hal/halx86/generic/../include/hal.h:210: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:213: error:
syntax error before "DMA1_ADDRESS_COUNT"
hal/halx86/generic/../include/hal.h:213: warning: no semicolon at end of
struct or union hal/halx86/generic/../include/hal.h:214: warning: type
defaults to `int' in declaration of `DmaStatus'
hal/halx86/generic/../include/hal.h:214: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:215: error:
syntax error before "DmaRequest"
hal/halx86/generic/../include/hal.h:215: warning: type defaults to `int'
in declaration of `DmaRequest' hal/halx86/generic/../include/hal.h:215:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:216: error: syntax error before
"SingleMask" hal/halx86/generic/../include/hal.h:216: warning: type
defaults to `int' in declaration of `SingleMask'
hal/halx86/generic/../include/hal.h:216: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:217: error:
syntax error before "Mode" hal/halx86/generic/../include/hal.h:217:
warning: type defaults to `int' in declaration of `Mode'
hal/halx86/generic/../include/hal.h:217: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:218: error:
syntax error before "ClearBytePointer"
hal/halx86/generic/../include/hal.h:218: warning: type defaults to `int'
in declaration of `ClearBytePointer'
hal/halx86/generic/../include/hal.h:218: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:219: error:
syntax error before "MasterClear"
hal/halx86/generic/../include/hal.h:219: warning: type defaults to `int'
in declaration of `MasterClear' hal/halx86/generic/../include/hal.h:219:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:220: error: syntax error before
"ClearMask" hal/halx86/generic/../include/hal.h:220: warning: type
defaults to `int' in declaration of `ClearMask'
hal/halx86/generic/../include/hal.h:220: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:221: error:
syntax error before "AllMask" hal/halx86/generic/../include/hal.h:221:
warning: type defaults to `int' in declaration of `AllMask'
hal/halx86/generic/../include/hal.h:221: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:222: warning:
type defaults to `int' in declaration of `DMA1_CONTROL'
hal/halx86/generic/../include/hal.h:222: warning: type defaults to `int'
in declaration of `PDMA1_CONTROL'
hal/halx86/generic/../include/hal.h:222: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:225: error:
syntax error before "DMA2_ADDRESS_COUNT"
hal/halx86/generic/../include/hal.h:225: warning: no semicolon at end of
struct or union hal/halx86/generic/../include/hal.h:226: warning: type
defaults to `int' in declaration of `DmaStatus'
hal/halx86/generic/../include/hal.h:226: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:227: error:
syntax error before "Reserved1" hal/halx86/generic/../include/hal.h:227:
warning: type defaults to `int' in declaration of `Reserved1'
hal/halx86/generic/../include/hal.h:227: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:228: error:
syntax error before "DmaRequest"
hal/halx86/generic/../include/hal.h:228: warning: type defaults to `int'
in declaration of `DmaRequest' hal/halx86/generic/../include/hal.h:228:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:229: error: syntax error before
"Reserved2" hal/halx86/generic/../include/hal.h:229: warning: type
defaults to `int' in declaration of `Reserved2'
hal/halx86/generic/../include/hal.h:229: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:230: error:
syntax error before "SingleMask"
hal/halx86/generic/../include/hal.h:230: warning: type defaults to `int'
in declaration of `SingleMask' hal/halx86/generic/../include/hal.h:230:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:231: error: syntax error before
"Reserved3" hal/halx86/generic/../include/hal.h:231: warning: type
defaults to `int' in declaration of `Reserved3'
hal/halx86/generic/../include/hal.h:231: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:232: error:
syntax error before "Mode" hal/halx86/generic/../include/hal.h:232:
warning: type defaults to `int' in declaration of `Mode'
hal/halx86/generic/../include/hal.h:232: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:233: error:
syntax error before "Reserved4" hal/halx86/generic/../include/hal.h:233:
warning: type defaults to `int' in declaration of `Reserved4'
hal/halx86/generic/../include/hal.h:233: error: conflicting types for
'Reserved4' hal/halx86/generic/../include/hal.h:71: error: previous
declaration of 'Reserved4' was here
hal/halx86/generic/../include/hal.h:233: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:234: error:
syntax error before "ClearBytePointer"
hal/halx86/generic/../include/hal.h:234: warning: type defaults to `int'
in declaration of `ClearBytePointer'
hal/halx86/generic/../include/hal.h:234: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:235: error:
syntax error before "Reserved5" hal/halx86/generic/../include/hal.h:235:
warning: type defaults to `int' in declaration of `Reserved5'
hal/halx86/generic/../include/hal.h:235: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:236: error:
syntax error before "MasterClear"
hal/halx86/generic/../include/hal.h:236: warning: type defaults to `int'
in declaration of `MasterClear' hal/halx86/generic/../include/hal.h:236:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:237: error: syntax error before
"Reserved6" hal/halx86/generic/../include/hal.h:237: warning: type
defaults to `int' in declaration of `Reserved6'
hal/halx86/generic/../include/hal.h:237: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:238: error:
syntax error before "ClearMask" hal/halx86/generic/../include/hal.h:238:
warning: type defaults to `int' in declaration of `ClearMask'
hal/halx86/generic/../include/hal.h:238: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:239: error:
syntax error before "Reserved7" hal/halx86/generic/../include/hal.h:239:
warning: type defaults to `int' in declaration of `Reserved7'
hal/halx86/generic/../include/hal.h:239: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:240: error:
syntax error before "AllMask" hal/halx86/generic/../include/hal.h:240:
warning: type defaults to `int' in declaration of `AllMask'
hal/halx86/generic/../include/hal.h:240: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:241: error:
syntax error before "Reserved8" hal/halx86/generic/../include/hal.h:241:
warning: type defaults to `int' in declaration of `Reserved8'
hal/halx86/generic/../include/hal.h:241: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:242: warning:
type defaults to `int' in declaration of `DMA2_CONTROL'
hal/halx86/generic/../include/hal.h:242: warning: type defaults to `int'
in declaration of `PDMA2_CONTROL'
hal/halx86/generic/../include/hal.h:242: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:248: error:
syntax error before "DMA1_CONTROL"
hal/halx86/generic/../include/hal.h:248: warning: no semicolon at end of
struct or union hal/halx86/generic/../include/hal.h:249: warning: type
defaults to `int' in declaration of `Reserved1'
hal/halx86/generic/../include/hal.h:249: error: conflicting types for
'Reserved1' hal/halx86/generic/../include/hal.h:227: error: previous
declaration of 'Reserved1' was here
hal/halx86/generic/../include/hal.h:249: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:252: error:
syntax error before "Pic1Operation"
hal/halx86/generic/../include/hal.h:252: warning: type defaults to `int'
in declaration of `Pic1Operation'
hal/halx86/generic/../include/hal.h:252: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:253: error:
syntax error before "Pic1Interrupt"
hal/halx86/generic/../include/hal.h:253: warning: type defaults to `int'
in declaration of `Pic1Interrupt'
hal/halx86/generic/../include/hal.h:253: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:254: error:
syntax error before "Reserved2" hal/halx86/generic/../include/hal.h:254:
warning: type defaults to `int' in declaration of `Reserved2'
hal/halx86/generic/../include/hal.h:254: error: conflicting types for
'Reserved2' hal/halx86/generic/../include/hal.h:229: error: previous
declaration of 'Reserved2' was here
hal/halx86/generic/../include/hal.h:254: error: conflicting types for
'Reserved2' hal/halx86/generic/../include/hal.h:229: error: previous
declaration of 'Reserved2' was here
hal/halx86/generic/../include/hal.h:254: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:257: error:
syntax error before "TimerCounter"
hal/halx86/generic/../include/hal.h:257: warning: type defaults to `int'
in declaration of `TimerCounter'
hal/halx86/generic/../include/hal.h:257: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:258: error:
syntax error before "TimerMemoryRefresh"
hal/halx86/generic/../include/hal.h:258: warning: type defaults to `int'
in declaration of `TimerMemoryRefresh'
hal/halx86/generic/../include/hal.h:258: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:259: error:
syntax error before "Speaker" hal/halx86/generic/../include/hal.h:259:
warning: type defaults to `int' in declaration of `Speaker'
hal/halx86/generic/../include/hal.h:259: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:260: error:
syntax error before "TimerOperation"
hal/halx86/generic/../include/hal.h:260: warning: type defaults to `int'
in declaration of `TimerOperation'
hal/halx86/generic/../include/hal.h:260: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:261: error:
syntax error before "TimerMisc" hal/halx86/generic/../include/hal.h:261:
warning: type defaults to `int' in declaration of `TimerMisc'
hal/halx86/generic/../include/hal.h:261: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:262: error:
syntax error before "Reserved3" hal/halx86/generic/../include/hal.h:262:
warning: type defaults to `int' in declaration of `Reserved3'
hal/halx86/generic/../include/hal.h:262: error: conflicting types for
'Reserved3' hal/halx86/generic/../include/hal.h:231: error: previous
declaration of 'Reserved3' was here
hal/halx86/generic/../include/hal.h:262: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:263: error:
syntax error before "TimerCounterControl"
hal/halx86/generic/../include/hal.h:263: warning: type defaults to `int'
in declaration of `TimerCounterControl'
hal/halx86/generic/../include/hal.h:263: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:264: error:
syntax error before "TimerFailSafeCounter"
hal/halx86/generic/../include/hal.h:264: warning: type defaults to `int'
in declaration of `TimerFailSafeCounter'
hal/halx86/generic/../include/hal.h:264: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:265: error:
syntax error before "Reserved4" hal/halx86/generic/../include/hal.h:265:
warning: type defaults to `int' in declaration of `Reserved4'
hal/halx86/generic/../include/hal.h:265: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:266: error:
syntax error before "TimerCounter2"
hal/halx86/generic/../include/hal.h:266: warning: type defaults to `int'
in declaration of `TimerCounter2'
hal/halx86/generic/../include/hal.h:266: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:267: error:
syntax error before "TimerOperation2"
hal/halx86/generic/../include/hal.h:267: warning: type defaults to `int'
in declaration of `TimerOperation2'
hal/halx86/generic/../include/hal.h:267: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:268: error:
syntax error before "Reserved5" hal/halx86/generic/../include/hal.h:268:
warning: type defaults to `int' in declaration of `Reserved5'
hal/halx86/generic/../include/hal.h:268: error: conflicting types for
'Reserved5' hal/halx86/generic/../include/hal.h:235: error: previous
declaration of 'Reserved5' was here
hal/halx86/generic/../include/hal.h:268: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:271: error:
syntax error before "Keyboard" hal/halx86/generic/../include/hal.h:271:
warning: type defaults to `int' in declaration of `Keyboard'
hal/halx86/generic/../include/hal.h:271: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:272: error:
syntax error before "NmiStatus" hal/halx86/generic/../include/hal.h:272:
warning: type defaults to `int' in declaration of `NmiStatus'
hal/halx86/generic/../include/hal.h:272: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:273: error:
syntax error before "Reserved6" hal/halx86/generic/../include/hal.h:273:
warning: type defaults to `int' in declaration of `Reserved6'
hal/halx86/generic/../include/hal.h:273: error: conflicting types for
'Reserved6' hal/halx86/generic/../include/hal.h:237: error: previous
declaration of 'Reserved6' was here
hal/halx86/generic/../include/hal.h:273: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:274: error:
syntax error before "NmiEnable" hal/halx86/generic/../include/hal.h:274:
warning: type defaults to `int' in declaration of `NmiEnable'
hal/halx86/generic/../include/hal.h:274: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:275: error:
syntax error before "Reserved7" hal/halx86/generic/../include/hal.h:275:
warning: type defaults to `int' in declaration of `Reserved7'
hal/halx86/generic/../include/hal.h:275: error: conflicting types for
'Reserved7' hal/halx86/generic/../include/hal.h:239: error: previous
declaration of 'Reserved7' was here
hal/halx86/generic/../include/hal.h:275: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:278: error:
syntax error before "DmaController1Pages"
hal/halx86/generic/../include/hal.h:278: warning: type defaults to `int'
in declaration of `DmaController1Pages'
hal/halx86/generic/../include/hal.h:278: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:279: error:
syntax error before "Reserved8" hal/halx86/generic/../include/hal.h:279:
warning: type defaults to `int' in declaration of `Reserved8'
hal/halx86/generic/../include/hal.h:279: error: conflicting types for
'Reserved8' hal/halx86/generic/../include/hal.h:241: error: previous
declaration of 'Reserved8' was here
hal/halx86/generic/../include/hal.h:279: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:282: error:
syntax error before "Pic2Operation"
hal/halx86/generic/../include/hal.h:282: warning: type defaults to `int'
in declaration of `Pic2Operation'
hal/halx86/generic/../include/hal.h:282: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:283: error:
syntax error before "Pic2Interrupt"
hal/halx86/generic/../include/hal.h:283: warning: type defaults to `int'
in declaration of `Pic2Interrupt'
hal/halx86/generic/../include/hal.h:283: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:284: error:
syntax error before "Reserved9" hal/halx86/generic/../include/hal.h:284:
warning: type defaults to `int' in declaration of `Reserved9'
hal/halx86/generic/../include/hal.h:284: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:287: error:
syntax error before "DmaController2"
hal/halx86/generic/../include/hal.h:287: warning: type defaults to `int'
in declaration of `DmaController2'
hal/halx86/generic/../include/hal.h:287: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:290: error:
syntax error before "SystemReserved"
hal/halx86/generic/../include/hal.h:290: warning: type defaults to `int'
in declaration of `SystemReserved'
hal/halx86/generic/../include/hal.h:290: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:293: error:
syntax error before "DmaHighByteCount1"
hal/halx86/generic/../include/hal.h:293: warning: type defaults to `int'
in declaration of `DmaHighByteCount1'
hal/halx86/generic/../include/hal.h:293: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:294: error:
syntax error before "Reserved10"
hal/halx86/generic/../include/hal.h:294: warning: type defaults to `int'
in declaration of `Reserved10' hal/halx86/generic/../include/hal.h:294:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:295: error: syntax error before
"DmaChainMode1" hal/halx86/generic/../include/hal.h:295: warning: type
defaults to `int' in declaration of `DmaChainMode1'
hal/halx86/generic/../include/hal.h:295: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:296: error:
syntax error before "DmaExtendedMode1"
hal/halx86/generic/../include/hal.h:296: warning: type defaults to `int'
in declaration of `DmaExtendedMode1'
hal/halx86/generic/../include/hal.h:296: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:297: error:
syntax error before "DmaBufferControl"
hal/halx86/generic/../include/hal.h:297: warning: type defaults to `int'
in declaration of `DmaBufferControl'
hal/halx86/generic/../include/hal.h:297: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:298: error:
syntax error before "Reserved11"
hal/halx86/generic/../include/hal.h:298: warning: type defaults to `int'
in declaration of `Reserved11' hal/halx86/generic/../include/hal.h:298:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:299: error: syntax error before
"ExtendedNmiControl" hal/halx86/generic/../include/hal.h:299: warning:
type defaults to `int' in declaration of `ExtendedNmiControl'
hal/halx86/generic/../include/hal.h:299: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:300: error:
syntax error before "NmiCommand"
hal/halx86/generic/../include/hal.h:300: warning: type defaults to `int'
in declaration of `NmiCommand' hal/halx86/generic/../include/hal.h:300:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:301: error: syntax error before
"Reserved12" hal/halx86/generic/../include/hal.h:301: warning: type
defaults to `int' in declaration of `Reserved12'
hal/halx86/generic/../include/hal.h:301: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:302: error:
syntax error before "BusMaster" hal/halx86/generic/../include/hal.h:302:
warning: type defaults to `int' in declaration of `BusMaster'
hal/halx86/generic/../include/hal.h:302: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:303: error:
syntax error before "Reserved13"
hal/halx86/generic/../include/hal.h:303: warning: type defaults to `int'
in declaration of `Reserved13' hal/halx86/generic/../include/hal.h:303:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:306: error: syntax error before
"DmaController2Pages" hal/halx86/generic/../include/hal.h:306: warning:
type defaults to `int' in declaration of `DmaController2Pages'
hal/halx86/generic/../include/hal.h:306: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:307: error:
syntax error before "Reserved14"
hal/halx86/generic/../include/hal.h:307: warning: type defaults to `int'
in declaration of `Reserved14' hal/halx86/generic/../include/hal.h:307:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:310: error: syntax error before
"DmaHighByteCount2" hal/halx86/generic/../include/hal.h:310: warning:
type defaults to `int' in declaration of `DmaHighByteCount2'
hal/halx86/generic/../include/hal.h:310: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:313: error:
syntax error before "Pic1EdgeLevel"
hal/halx86/generic/../include/hal.h:313: warning: type defaults to `int'
in declaration of `Pic1EdgeLevel'
hal/halx86/generic/../include/hal.h:313: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:314: error:
syntax error before "Pic2EdgeLevel"
hal/halx86/generic/../include/hal.h:314: warning: type defaults to `int'
in declaration of `Pic2EdgeLevel'
hal/halx86/generic/../include/hal.h:314: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:315: error:
syntax error before "Reserved15"
hal/halx86/generic/../include/hal.h:315: warning: type defaults to `int'
in declaration of `Reserved15' hal/halx86/generic/../include/hal.h:315:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:318: error: syntax error before
"DmaChainMode2" hal/halx86/generic/../include/hal.h:318: warning: type
defaults to `int' in declaration of `DmaChainMode2'
hal/halx86/generic/../include/hal.h:318: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:319: error:
syntax error before "Reserved16"
hal/halx86/generic/../include/hal.h:319: warning: type defaults to `int'
in declaration of `Reserved16' hal/halx86/generic/../include/hal.h:319:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:320: error: syntax error before
"DmaExtendedMode2" hal/halx86/generic/../include/hal.h:320: warning:
type defaults to `int' in declaration of `DmaExtendedMode2'
hal/halx86/generic/../include/hal.h:320: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:321: error:
syntax error before "Reserved17"
hal/halx86/generic/../include/hal.h:321: warning: type defaults to `int'
in declaration of `Reserved17' hal/halx86/generic/../include/hal.h:321:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:324: error: syntax error before
"DmaChannelStop" hal/halx86/generic/../include/hal.h:324: warning: type
defaults to `int' in declaration of `DmaChannelStop'
hal/halx86/generic/../include/hal.h:324: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:325: error:
syntax error before '}' token hal/halx86/generic/../include/hal.h:325:
warning: type defaults to `int' in declaration of `EISA_CONTROL'
hal/halx86/generic/../include/hal.h:325: warning: type defaults to `int'
in declaration of `PEISA_CONTROL'
hal/halx86/generic/../include/hal.h:325: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:327: error:
syntax error before "HalpEisaDma"
hal/halx86/generic/../include/hal.h:327: warning: type defaults to `int'
in declaration of `HalpEisaDma' hal/halx86/generic/../include/hal.h:327:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:328: error: syntax error before
"MasterAdapter" hal/halx86/generic/../include/hal.h:328: warning: type
defaults to `int' in declaration of `MasterAdapter'
hal/halx86/generic/../include/hal.h:328: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:330: error:
syntax error before "ULONG" hal/halx86/generic/../include/hal.h:330:
warning: type defaults to `int' in declaration of `HalpEisaDma'
hal/halx86/generic/../include/hal.h:330: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:331: error:
syntax error before "PADAPTER_OBJECT"
hal/halx86/generic/../include/hal.h:331: warning: type defaults to `int'
in declaration of `MasterAdapter'
hal/halx86/generic/../include/hal.h:331: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:340: error:
syntax error before "DMA_ADAPTER"
hal/halx86/generic/../include/hal.h:340: warning: no semicolon at end of
struct or union hal/halx86/generic/../include/hal.h:341: error:
conflicting types for 'MasterAdapter'
hal/halx86/generic/../include/hal.h:331: error: previous declaration of
'MasterAdapter' was here hal/halx86/generic/../include/hal.h:342: error:
syntax error before "MapRegistersPerChannel"
hal/halx86/generic/../include/hal.h:342: warning: type defaults to `int'
in declaration of `MapRegistersPerChannel'
hal/halx86/generic/../include/hal.h:342: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:343: error:
syntax error before "AdapterBaseVa"
hal/halx86/generic/../include/hal.h:343: warning: type defaults to `int'
in declaration of `AdapterBaseVa'
hal/halx86/generic/../include/hal.h:343: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:344: error:
syntax error before "MapRegisterBase"
hal/halx86/generic/../include/hal.h:344: warning: type defaults to `int'
in declaration of `MapRegisterBase'
hal/halx86/generic/../include/hal.h:344: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:345: error:
syntax error before "NumberOfMapRegisters"
hal/halx86/generic/../include/hal.h:345: warning: type defaults to `int'
in declaration of `NumberOfMapRegisters'
hal/halx86/generic/../include/hal.h:345: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:346: error:
syntax error before "CommittedMapRegisters"
hal/halx86/generic/../include/hal.h:346: warning: type defaults to `int'
in declaration of `CommittedMapRegisters'
hal/halx86/generic/../include/hal.h:346: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:347: error:
syntax error before "CurrentWcb"
hal/halx86/generic/../include/hal.h:347: warning: type defaults to `int'
in declaration of `CurrentWcb' hal/halx86/generic/../include/hal.h:347:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:348: error: syntax error before
"ChannelWaitQueue" hal/halx86/generic/../include/hal.h:348: warning:
type defaults to `int' in declaration of `ChannelWaitQueue'
hal/halx86/generic/../include/hal.h:348: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:349: error:
syntax error before "RegisterWaitQueue"
hal/halx86/generic/../include/hal.h:349: warning: type defaults to `int'
in declaration of `RegisterWaitQueue'
hal/halx86/generic/../include/hal.h:349: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:350: error:
syntax error before "AdapterQueue"
hal/halx86/generic/../include/hal.h:350: warning: type defaults to `int'
in declaration of `AdapterQueue'
hal/halx86/generic/../include/hal.h:350: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:351: error:
syntax error before "SpinLock" hal/halx86/generic/../include/hal.h:351:
warning: type defaults to `int' in declaration of `SpinLock'
hal/halx86/generic/../include/hal.h:351: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:352: error:
syntax error before "MapRegisters"
hal/halx86/generic/../include/hal.h:352: warning: type defaults to `int'
in declaration of `MapRegisters'
hal/halx86/generic/../include/hal.h:352: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:353: error:
syntax error before "PagePort" hal/halx86/generic/../include/hal.h:353:
warning: type defaults to `int' in declaration of `PagePort'
hal/halx86/generic/../include/hal.h:353: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:354: error:
syntax error before "ChannelNumber"
hal/halx86/generic/../include/hal.h:354: warning: type defaults to `int'
in declaration of `ChannelNumber'
hal/halx86/generic/../include/hal.h:354: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:355: error:
syntax error before "AdapterNumber"
hal/halx86/generic/../include/hal.h:355: warning: type defaults to `int'
in declaration of `AdapterNumber'
hal/halx86/generic/../include/hal.h:355: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:356: error:
syntax error before "DmaPortAddress"
hal/halx86/generic/../include/hal.h:356: warning: type defaults to `int'
in declaration of `DmaPortAddress'
hal/halx86/generic/../include/hal.h:356: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:358: error:
syntax error before "DMA_MODE" hal/halx86/generic/../include/hal.h:358:
warning: no semicolon at end of struct or union
hal/halx86/generic/../include/hal.h:359: warning: type defaults to `int'
in declaration of `AdapterModeByte'
hal/halx86/generic/../include/hal.h:359: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:361: error:
syntax error before "NeedsMapRegisters"
hal/halx86/generic/../include/hal.h:361: warning: type defaults to `int'
in declaration of `NeedsMapRegisters'
hal/halx86/generic/../include/hal.h:361: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:362: error:
syntax error before "MasterDevice"
hal/halx86/generic/../include/hal.h:362: warning: type defaults to `int'
in declaration of `MasterDevice'
hal/halx86/generic/../include/hal.h:362: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:363: error:
syntax error before "Width16Bits"
hal/halx86/generic/../include/hal.h:363: warning: type defaults to `int'
in declaration of `Width16Bits' hal/halx86/generic/../include/hal.h:363:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:364: error: syntax error before
"ScatterGather" hal/halx86/generic/../include/hal.h:364: warning: type
defaults to `int' in declaration of `ScatterGather'
hal/halx86/generic/../include/hal.h:364: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:365: error:
syntax error before "IgnoreCount"
hal/halx86/generic/../include/hal.h:365: warning: type defaults to `int'
in declaration of `IgnoreCount' hal/halx86/generic/../include/hal.h:365:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:366: error: syntax error before
"Dma32BitAddresses" hal/halx86/generic/../include/hal.h:366: warning:
type defaults to `int' in declaration of `Dma32BitAddresses'
hal/halx86/generic/../include/hal.h:366: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:367: error:
syntax error before "Dma64BitAddresses"
hal/halx86/generic/../include/hal.h:367: warning: type defaults to `int'
in declaration of `Dma64BitAddresses'
hal/halx86/generic/../include/hal.h:367: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:368: error:
syntax error before "LegacyAdapter"
hal/halx86/generic/../include/hal.h:368: warning: type defaults to `int'
in declaration of `LegacyAdapter'
hal/halx86/generic/../include/hal.h:368: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:369: error:
syntax error before "AdapterList"
hal/halx86/generic/../include/hal.h:369: warning: type defaults to `int'
in declaration of `AdapterList' hal/halx86/generic/../include/hal.h:369:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:395: error: syntax error before
"STDCALL" hal/halx86/generic/../include/hal.h:396: error: syntax error
before "HAL_QUERY_INFORMATION_CLASS"
hal/halx86/generic/../include/hal.h:399: warning: type defaults to `int'
in declaration of `HalpQuerySystemInformation'
hal/halx86/generic/../include/hal.h:399: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:403: error:
syntax error before "STDCALL" hal/halx86/generic/../include/hal.h:404:
warning: type defaults to `int' in declaration of
`HalReleaseDisplayOwnership' hal/halx86/generic/../include/hal.h:404:
warning: data definition has no type or storage class
hal/halx86/generic/../include/hal.h:406: error: syntax error before
"STDCALL" hal/halx86/generic/../include/hal.h:407: warning: type
defaults to `int' in declaration of `HalQueryDisplayOwnership'
hal/halx86/generic/../include/hal.h:407: warning: data definition has no
type or storage class hal/halx86/generic/../include/hal.h:419: error:
syntax error before "Ki386ReadFsByte"
hal/halx86/generic/../include/hal.h:419: error: syntax error before
"offset" hal/halx86/generic/../include/hal.h:420: warning: return type
defaults to `int' hal/halx86/generic/../include/hal.h: In function
`Ki386ReadFsByte': hal/halx86/generic/../include/hal.h:421: error:
`BYTE' undeclared (first use in this function)
hal/halx86/generic/../include/hal.h:421: error: (Each undeclared
identifier is reported only once
hal/halx86/generic/../include/hal.h:421: error: for each function it
appears in.) hal/halx86/generic/../include/hal.h:421: error: syntax
error before "b" hal/halx86/generic/../include/hal.h:422: error: `b'
undeclared (first use in this function)
hal/halx86/generic/../include/hal.h:422: error: `offset' undeclared
(first use in this function) hal/halx86/generic/../include/hal.h: At top
level: hal/halx86/generic/../include/hal.h:426: error: syntax error
before "Ki386WriteFsByte" hal/halx86/generic/../include/hal.h:426:
error: syntax error before "offset"
hal/halx86/generic/../include/hal.h:427: warning: return type defaults
to `int' hal/halx86/generic/../include/hal.h: In function
`Ki386WriteFsByte': hal/halx86/generic/../include/hal.h:428: error:
`value' undeclared (first use in this function)
hal/halx86/generic/../include/hal.h:428: error: `offset' undeclared
(first use in this function) hal/halx86/generic/../include/hal.h: At top
level: hal/halx86/generic/../include/hal.h:443: error: syntax error
before "BusNumber" hal\halx86\up\halinit_up.c:20: error: syntax error
before "HalpInitPhase0" hal\halx86\up\halinit_up.c:21: warning: return
type defaults to `int' {standard input}: Assembler messages: {standard
input}:80: Warning: size of "_Reserved1" is already 16; not changing to
64 {standard input}:83: Warning: size of "_Reserved2" is already 16; not
changing to 128 {standard input}:94: Warning: size of "_Reserved5" is
already 16; not changing to 80 {standard input}:97: Warning: size of
"_Reserved6" is already 16; not changing to 64 {standard input}:99:
Warning: size of "_Reserved7" is already 16; not changing to 64
{standard input}:101: Warning: size of "_Reserved8" is already 16; not
changing to 64 mingw32-make: *** [obj-i386\hal\halx86\up\halinit_up.o]
Error 1 mingw32-make: *** Waiting for unfinished jobs.... ) Reading
build files...done Detecting compiler...detected (gcc) Detecting netwide
assembler...detected (nasm) Detecting compiler -pipe support...detected
Detecting compiler pre-compiled header support...detected Processing
modules...done Creating directories...done Unpacking WINE
resources...done Generating test support code...done Generating proxy
makefiles...done Checking automatic dependencies...done 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.reactos.org/pipermail/ros-cis/attachments/20050618/a5a05e98/attachment.html