[ros-dev] 0.3.1 Branch First Boot Linux BE

James Tabor jimtabor at adsl-64-217-116-74.dsl.hstntx.swbell.net
Thu Jan 25 01:34:38 CET 2007


SSDD,,, Hardware, etc,,,,

kdb:> (ntoskrnl/kd/kdio.c:193) -----------------------------------------------------
(ntoskrnl/kd/kdio.c:194) ReactOS 0.3.1-SVN (Build 20070124-r25623)
(ntoskrnl/kd/kdio.c:195) Command Line: DEBUGPORT=COM1
(ntoskrnl/kd/kdio.c:199) ARC Paths: multi(0)disk(0)rdisk(0)partition(1) \ multi(
0)disk(0)rdisk(0)partition(1) \ReactOS\
(ntoskrnl/ke/i386/cpu.c:502) Not handling AMD caches yet
Used memory 1015744Kb
(ntoskrnl/se/semgr.c:41) FIXME: SeAccessCheck has been HACKED to always grant access!
(ntoskrnl/se/semgr.c:42) FIXME: Please fix all the code that doesn't get proper rights!
(ntoskrnl/ke/clock.c:92) FIXME: TIMER UPDATE NOT DONE!!!
(ntoskrnl/ke/i386/kiinit.c:41) Your machine supports PGE but ReactOS doesn't yet.
WARNING:  HaliQuerySystemInformation at hal/halx86/generic/sysinfo.c:26 is UNIMPLEMENTED!
(ntoskrnl/ke/i386/patpge.c:62) Your machine supports PAT but ReactOS doesn't yet.
(ntoskrnl/ke/i386/cpu.c:745) Your machine supports XMMI exceptions but ReactOS doesn't
(ntoskrnl/io/iomgr/driver.c:905) Driver 'buslogic.sys' load failed, status (c0000001)
(ntoskrnl/io/iomgr/file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1
(ntoskrnl/ldr/loader.c:259) Could not open module file: \SystemRoot\system32\drivers\mpu401.sys 
(Status 0xc0000034)
(ntoskrnl/ldr/loader.c:259) Could not open module file: \SystemRoot\system32\drivers\sndblst.sys 
(Status 0xc0000034)
(ntoskrnl/io/iomgr/file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 10001
(ntoskrnl/io/iomgr/file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1
(ntoskrnl/vdm/vdmmain.c:42) VME detected but not yet supported
(lib/fslib/vfatlib/vfatlib.c:215) VfatChkdsk() unimplemented!
(ntoskrnl/io/iomgr/file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1f01ff
(ntoskrnl/io/iomgr/file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1f01ff
(ntoskrnl/io/iomgr/file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1f01ff
(ntoskrnl/io/iomgr/file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1f01ff
(./subsystems/win32/win32k/objects/dc.c:324) No InstalledDisplayDrivers value in service entry found
(./subsystems/win32/win32k/objects/dc.c:479) FindDriverFileNames failed
(ntoskrnl/io/iomgr/file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1f01ff
(dll/ntdll/ldr/utils.c:1198) LdrGetExportByName(): failed to find mxdMessage
(dll/ntdll/ldr/utils.c:2024) Failed to create or open dll section of 'msacm.drv' (Status c0000135)
(dll/ntdll/ldr/utils.c:2024) Failed to create or open dll section of 'midimap.drv' (Status c0000135)

<Here.......>

(lib/cmlib/hiveinit.c:31) Verify Hive Header failed:
(lib/cmlib/hiveinit.c:32)     Signature: 0x66676572 and not 0x66676572, Major: 0x1 and not 0x1
(lib/cmlib/hiveinit.c:34)     Minor: 0x3 is not >= 0x3, Type: 0x0 and not 0x0
(lib/cmlib/hiveinit.c:36)     Format: 0x1 and not 0x1, Cluster: 0x1 and not 1
(lib/cmlib/hiveinit.c:38)     Sequence: 0x17 and not 0x17, Checksum: 0x70e9199b and not 0x0
(lib/cmlib/hiveinit.c:159) Registry is corrupt: ChunkSize 20480 < sizeof(HBASE_BLOCK) 4096, or 
HvpVerifyHiveHeader() failed
(ntoskrnl/cm/regfile.c:580) Failed to open hive
(ntoskrnl/mm/mm.c:193) Page fault at high IRQL was 2, address cccccc94
Entered debugger on last-chance exception (Exception Code: 0xc0000006) (Unknown/
User defined exception)
kdb:> bt
Eip:
<ntoskrnl.exe:4f24e (ntoskrnl/mm/npool.c:1556 (ExFreeNonPagedPool))>
Frames:
<ntoskrnl.exe:5296e (ntoskrnl/mm/pool.c:237 (ExFreePool))>
<ntoskrnl.exe:5299e (ntoskrnl/mm/pool.c:249 (ExFreePoolWithTag))>
<ntoskrnl.exe:71ff2 (ntoskrnl/rtl/libsupp.c:61 (RtlpFreeMemory))>
<ntoskrnl.exe:97966 (lib/rtl/unicode.c:392 (RtlFreeUnicodeString))>
<ntoskrnl.exe:11cb0 (ntoskrnl/cm/regfile.c:585 (CmiLoadHive))>
<ntoskrnl.exe:105e9 (ntoskrnl/cm/ntfunc.c:2348 (NtLoadKey2))>
<ntoskrnl.exe:1071f (ntoskrnl/cm/ntfunc.c:2238 (NtLoadKey))>
<ntoskrnl.exe:7ce34 (ntoskrnl/ke/i386/trap.s:250 (KiFastCallEntry))>
<ntdll.dll:85ad (dll/ntdll/main/i386/dispatch.S:265 (KiFastSystemCallRet at 0))>
<userenv.dll:3ab6 (dll/win32/userenv/profile.c:292 (CreateUserProfileW))>
<syssetup.dll:1a2f (dll/win32/syssetup/install.c:619 (InstallReactOS))>
<setup.exe:1099 (base/setup/setup/setup.c:107 (WinMain))>
<setup.exe:133c (lib/mingw/main.c:78 (main))>
<setup.exe:124d (lib/mingw/crt1.c:228 (__mingw_CRTStartup))>
<setup.exe:128f (lib/mingw/crt1.c:262 (WinMainCRTStartup))>
<kernel32.dll:1a8bd (dll/win32/kernel32/process/create.c:68 (BaseProcessStartup))>
<00000000>
kdb:>

I haven't tested the RosBE 4.1.2 build yet.

Thanks,
James


More information about the Ros-dev mailing list