[ros-dev] Unused mailing lists
pierre at reactos.org
Thu Feb 16 21:46:04 UTC 2012
Please, move this discussion to another thread.
Or at least, rename topic.
Le jeudi 16 février 2012 à 22:26 +0100, caemyr at myopera.com a écrit :
> Diablo (windows-based builder) is a 1st generation i7-920 with 12GB DDR3. Building is done on SSD OCZ Vertex3, with storage on RAIDed Samsung Spinpoint F3. Both SSD and RAID are connectec via LSI MegaRAID pci express card. CPU is bit weaker than Cameron's but it profits from faster memory bus (mine is good old-fashioned triple channel vs newer dual-channels).
> My i5 lappy takes around 30 minutes due to weak hdd. A Q6600 will probably take 40-50 minutes or more.
> On Thu, Feb 16, 2012, at 02:33 AM, Cameron Gutman wrote:
> > On May 21, 2008, at 4:15 PM, Mikey wrote:
> > > Hello I am new here what are the system minimum specs as I have old system for development.
> > A development machine (one that can build ReactOS and test in a VM)
> > should have decent specs. You're going to want at least a dual-core,
> > preferably 4 or more cores to get anything built in decent time. To give
> > you some numbers, my Core i5-2500K @ 4.1 GHz an 8 GB of RAM can build
> > ReactOS in around 10 minutes. My laptop's 2.4 GHz Core 2 Duo with 6 GB of
> > RAM builds ReactOS in about 25 minutes, but keep in mind both systems
> > build off an SSD. I had a 2.8 GHz Pentium 4 HT box at one point and if
> > memory serves, it took over an hour and a half to build ReactOS. Anything
> > slower than that and you're looking at several hours of build time.
> > If you're really looking for testing machine (one that can run ReactOS
> > natively) specs, you can run pretty much anything with a Pentium I or
> > above. You're going to want at least 128 MB of RAM.
> > Regards,
> > Cameron
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 4016 bytes
Desc: not available
More information about the Ros-dev