[ros-diffs] [mbosma] 20450: Import libjpeg

mbosma at svn.reactos.org mbosma at svn.reactos.org
Fri Dec 30 02:02:03 CET 2005


Import libjpeg
Added: vendor/libjpeg/
Added: vendor/libjpeg/current/
Added: vendor/libjpeg/current/README
Added: vendor/libjpeg/current/ansi2knr.1
Added: vendor/libjpeg/current/ansi2knr.c
Added: vendor/libjpeg/current/cderror.h
Added: vendor/libjpeg/current/cdjpeg.c
Added: vendor/libjpeg/current/cdjpeg.h
Added: vendor/libjpeg/current/change.log
Added: vendor/libjpeg/current/cjpeg.1
Added: vendor/libjpeg/current/cjpeg.c
Added: vendor/libjpeg/current/ckconfig.c
Added: vendor/libjpeg/current/coderules.doc
Added: vendor/libjpeg/current/config.guess
Added: vendor/libjpeg/current/config.sub
Added: vendor/libjpeg/current/configure
Added: vendor/libjpeg/current/djpeg.1
Added: vendor/libjpeg/current/djpeg.c
Added: vendor/libjpeg/current/example.c
Added: vendor/libjpeg/current/filelist.doc
Added: vendor/libjpeg/current/install-sh
Added: vendor/libjpeg/current/install.doc
Added: vendor/libjpeg/current/jcapimin.c
Added: vendor/libjpeg/current/jcapistd.c
Added: vendor/libjpeg/current/jccoefct.c
Added: vendor/libjpeg/current/jccolor.c
Added: vendor/libjpeg/current/jcdctmgr.c
Added: vendor/libjpeg/current/jchuff.c
Added: vendor/libjpeg/current/jchuff.h
Added: vendor/libjpeg/current/jcinit.c
Added: vendor/libjpeg/current/jcmainct.c
Added: vendor/libjpeg/current/jcmarker.c
Added: vendor/libjpeg/current/jcmaster.c
Added: vendor/libjpeg/current/jcomapi.c
Added: vendor/libjpeg/current/jconfig.bcc
Added: vendor/libjpeg/current/jconfig.cfg
Added: vendor/libjpeg/current/jconfig.dj
Added: vendor/libjpeg/current/jconfig.doc
Added: vendor/libjpeg/current/jconfig.mac
Added: vendor/libjpeg/current/jconfig.manx
Added: vendor/libjpeg/current/jconfig.mc6
Added: vendor/libjpeg/current/jconfig.sas
Added: vendor/libjpeg/current/jconfig.st
Added: vendor/libjpeg/current/jconfig.vc
Added: vendor/libjpeg/current/jconfig.vms
Added: vendor/libjpeg/current/jconfig.wat
Added: vendor/libjpeg/current/jcparam.c
Added: vendor/libjpeg/current/jcphuff.c
Added: vendor/libjpeg/current/jcprepct.c
Added: vendor/libjpeg/current/jcsample.c
Added: vendor/libjpeg/current/jctrans.c
Added: vendor/libjpeg/current/jdapimin.c
Added: vendor/libjpeg/current/jdapistd.c
Added: vendor/libjpeg/current/jdatadst.c
Added: vendor/libjpeg/current/jdatasrc.c
Added: vendor/libjpeg/current/jdcoefct.c
Added: vendor/libjpeg/current/jdcolor.c
Added: vendor/libjpeg/current/jdct.h
Added: vendor/libjpeg/current/jddctmgr.c
Added: vendor/libjpeg/current/jdhuff.c
Added: vendor/libjpeg/current/jdhuff.h
Added: vendor/libjpeg/current/jdinput.c
Added: vendor/libjpeg/current/jdmainct.c
Added: vendor/libjpeg/current/jdmarker.c
Added: vendor/libjpeg/current/jdmaster.c
Added: vendor/libjpeg/current/jdmerge.c
Added: vendor/libjpeg/current/jdphuff.c
Added: vendor/libjpeg/current/jdpostct.c
Added: vendor/libjpeg/current/jdsample.c
Added: vendor/libjpeg/current/jdtrans.c
Added: vendor/libjpeg/current/jerror.c
Added: vendor/libjpeg/current/jerror.h
Added: vendor/libjpeg/current/jfdctflt.c
Added: vendor/libjpeg/current/jfdctfst.c
Added: vendor/libjpeg/current/jfdctint.c
Added: vendor/libjpeg/current/jidctflt.c
Added: vendor/libjpeg/current/jidctfst.c
Added: vendor/libjpeg/current/jidctint.c
Added: vendor/libjpeg/current/jidctred.c
Added: vendor/libjpeg/current/jinclude.h
Added: vendor/libjpeg/current/jmemansi.c
Added: vendor/libjpeg/current/jmemdos.c
Added: vendor/libjpeg/current/jmemdosa.asm
Added: vendor/libjpeg/current/jmemmac.c
Added: vendor/libjpeg/current/jmemmgr.c
Added: vendor/libjpeg/current/jmemname.c
Added: vendor/libjpeg/current/jmemnobs.c
Added: vendor/libjpeg/current/jmemsys.h
Added: vendor/libjpeg/current/jmorecfg.h
Added: vendor/libjpeg/current/jpegint.h
Added: vendor/libjpeg/current/jpeglib.h
Added: vendor/libjpeg/current/jpegtran.1
Added: vendor/libjpeg/current/jpegtran.c
Added: vendor/libjpeg/current/jquant1.c
Added: vendor/libjpeg/current/jquant2.c
Added: vendor/libjpeg/current/jutils.c
Added: vendor/libjpeg/current/jversion.h
Added: vendor/libjpeg/current/libjpeg.doc
Added: vendor/libjpeg/current/ltconfig
Added: vendor/libjpeg/current/ltmain.sh
[truncated at 100 lines; 47 more skipped] 
  _____  

Added: vendor/libjpeg/current/README
--- vendor/libjpeg/current/README	2005-12-30 00:18:48 UTC (rev
20449)
+++ vendor/libjpeg/current/README	2005-12-30 01:00:43 UTC (rev
20450)
@@ -0,0 +1,385 @@

+The Independent JPEG Group's JPEG software
+==========================================
+
+README for release 6b of 27-Mar-1998
+====================================
+
+This distribution contains the sixth public release of the Independent
JPEG
+Group's free JPEG software.  You are welcome to redistribute this
software and
+to use it for any purpose, subject to the conditions under LEGAL
ISSUES, below.
+
+Serious users of this software (particularly those incorporating it
into
+larger programs) should contact IJG at jpeg-info at uunet.uu.net to be
added to
+our electronic mailing list.  Mailing list members are notified of
updates
+and have a chance to participate in technical discussions, etc.
+
+This software is the work of Tom Lane, Philip Gladstone, Jim Boucher,
+Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide
Rossi,
+Guido Vollbeding, Ge' Weijers, and other members of the Independent
JPEG
+Group.
+
+IJG is not affiliated with the official ISO JPEG standards committee.
+
+
+DOCUMENTATION ROADMAP
+=====================
+
+This file contains the following sections:
+
+OVERVIEW            General description of JPEG and the IJG software.
+LEGAL ISSUES        Copyright, lack of warranty, terms of distribution.
+REFERENCES          Where to learn more about JPEG.
+ARCHIVE LOCATIONS   Where to find newer versions of this software.
+RELATED SOFTWARE    Other stuff you should get.
+FILE FORMAT WARS    Software *not* to get.
+TO DO               Plans for future IJG releases.
+
+Other documentation files in the distribution are:
+
+User documentation:
+  install.doc       How to configure and install the IJG software.
+  usage.doc         Usage instructions for cjpeg, djpeg, jpegtran,
+                    rdjpgcom, and wrjpgcom.
+  *.1               Unix-style man pages for programs (same info as
usage.doc).
+  wizard.doc        Advanced usage instructions for JPEG wizards only.
+  change.log        Version-to-version change highlights.
+Programmer and internal documentation:
+  libjpeg.doc       How to use the JPEG library in your own programs.
+  example.c         Sample code for calling the JPEG library.
+  structure.doc     Overview of the JPEG library's internal structure.
+  filelist.doc      Road map of IJG files.
+  coderules.doc     Coding style rules --- please read if you
contribute code.
+
+Please read at least the files install.doc and usage.doc.  Useful
information
+can also be found in the JPEG FAQ (Frequently Asked Questions) article.
See
+ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
+
+If you want to understand how the JPEG code works, we suggest reading
one or
+more of the REFERENCES, then looking at the documentation files (in
roughly
+the order listed) before diving into the code.
+
+
+OVERVIEW
+========
+
+This package contains C software to implement JPEG image compression
and
+decompression.  JPEG (pronounced "jay-peg") is a standardized
compression
+method for full-color and gray-scale images.  JPEG is intended for
compressing
+"real-world" scenes; line drawings, cartoons and other non-realistic
images
+are not its strong suit.  JPEG is lossy, meaning that the output image
is not
+exactly identical to the input image.  Hence you must not use JPEG if
you
+have to have identical output bits.  However, on typical photographic
images,
+very good compression levels can be obtained with no visible change,
and
+remarkably high compression levels are possible if you can tolerate a
+low-quality image.  For more details, see the references, or just
experiment
+with various compression settings.
+
+This software implements JPEG baseline, extended-sequential, and
progressive
+compression processes.  Provision is made for supporting all variants
of these
+processes, although some uncommon parameter settings aren't implemented
yet.
+For legal reasons, we are not distributing code for the
arithmetic-coding
+variants of JPEG; see LEGAL ISSUES.  We have made no provision for
supporting
+the hierarchical or lossless processes defined in the standard.
+
+We provide a set of library routines for reading and writing JPEG image
files,
+plus two sample applications "cjpeg" and "djpeg", which use the library
to
+perform conversion between JPEG and some other popular image file
formats.
+The library is intended to be reused in other applications.
+
+In order to support file conversion and viewing software, we have
included
+considerable functionality beyond the bare JPEG coding/decoding
capability;
+for example, the color quantization modules are not strictly part of
JPEG
+decoding, but they are essential for output to colormapped file formats
or
+colormapped displays.  These extra functions can be compiled out of the
+library if not required for a particular application.  We have also
included
+"jpegtran", a utility for lossless transcoding between different JPEG
+processes, and "rdjpgcom" and "wrjpgcom", two simple applications for
+inserting and extracting textual comments in JFIF files.
+
+The emphasis in designing this software has been on achieving
portability and
+flexibility, while also making it fast enough to be useful.  In
particular,
+the software is not intended to be read as a tutorial on JPEG.  (See
the
+REFERENCES section for introductory material.)  Rather, it is intended
to
+be reliable, portable, industrial-strength code.  We do not claim to
have
+achieved that goal in every aspect of the software, but we strive for
it.
+
+We welcome the use of this software as a component of commercial
products.
+No royalty is required, but we do ask for an acknowledgement in product
+documentation, as described under LEGAL ISSUES.
+
+
+LEGAL ISSUES
+============
+
+In plain English:
+
+1. We don't promise that this software works.  (But if you find any
bugs,
+   please let us know!)
+2. You can use this software for whatever you want.  You don't have to
pay us.
+3. You may not pretend that you wrote this software.  If you use it in
a
+   program, you must acknowledge somewhere in your documentation that
+   you've used the IJG code.
+
+In legalese:
+
+The authors make NO WARRANTY or representation, either express or
implied,
+with respect to this software, its quality, accuracy, merchantability,
or
+fitness for a particular purpose.  This software is provided "AS IS",
and you,
+its user, assume the entire risk as to its quality and accuracy.
+
+This software is copyright (C) 1991-1998, Thomas G. Lane.
+All Rights Reserved except as specified below.
+
+Permission is hereby granted to use, copy, modify, and distribute this
+software (or portions thereof) for any purpose, without fee, subject to
these
+conditions:
+(1) If any part of the source code for this software is distributed,
then this
+README file must be included, with this copyright and no-warranty
notice
+unaltered; and any additions, deletions, or changes to the original
files
+must be clearly indicated in accompanying documentation.
+(2) If only executable code is distributed, then the accompanying
+documentation must state that "this software is based in part on the
work of
+the Independent JPEG Group".
+(3) Permission for use of this software is granted only if the user
accepts
+full responsibility for any undesirable consequences; the authors
accept
+NO LIABILITY for damages of any kind.
+
+These conditions apply to any software derived from or based on the IJG
code,
+not just to the unmodified library.  If you use our work, you ought to
+acknowledge us.
+
+Permission is NOT granted for the use of any IJG author's name or
company name
+in advertising or publicity relating to this software or products
derived from
+it.  This software may be referred to only as "the Independent JPEG
Group's
+software".
+
+We specifically permit and encourage the use of this software as the
basis of
+commercial products, provided that all warranty or liability claims are
+assumed by the product vendor.
+
+
+ansi2knr.c is included in this distribution by permission of L. Peter
Deutsch,
+sole proprietor of its copyright holder, Aladdin Enterprises of Menlo
Park, CA.
+ansi2knr.c is NOT covered by the above copyright and conditions, but
instead
+by the usual distribution terms of the Free Software Foundation;
principally,
+that you must include source code if you redistribute it.  (See the
file
+ansi2knr.c for full details.)  However, since ansi2knr.c is not needed
as part
+of any program generated from the IJG code, this does not limit you
more than
+the foregoing paragraphs do.
+
+The Unix configuration script "configure" was produced with GNU
Autoconf.
+It is copyright by the Free Software Foundation but is freely
distributable.
+The same holds for its supporting scripts (config.guess, config.sub,
+ltconfig, ltmain.sh).  Another support script, install-sh, is copyright
+by M.I.T. but is also freely distributable.
+
+It appears that the arithmetic coding option of the JPEG spec is
covered by
+patents owned by IBM, AT&T, and Mitsubishi.  Hence arithmetic coding
cannot
+legally be used without obtaining one or more licenses.  For this
reason,
+support for arithmetic coding has been removed from the free JPEG
software.
+(Since arithmetic coding provides only a marginal gain over the
unpatented
+Huffman mode, it is unlikely that very many implementations will
support it.)
+So far as we are aware, there are no patent restrictions on the
remaining
+code.
+
+The IJG distribution formerly included code to read and write GIF
files.
+To avoid entanglement with the Unisys LZW patent, GIF reading support
has
+been removed altogether, and the GIF writer has been simplified to
produce
+"uncompressed GIFs".  This technique does not use the LZW algorithm;
the
+resulting GIF files are larger than usual, but are readable by all
standard
+GIF decoders.
+
+We are required to state that
+    "The Graphics Interchange Format(c) is the Copyright property of
+    CompuServe Incorporated.  GIF(sm) is a Service Mark property of
+    CompuServe Incorporated."
+
+
+REFERENCES
+==========
+
+We highly recommend reading one or more of these references before
trying to
+understand the innards of the JPEG software.
+
+The best short technical introduction to the JPEG compression algorithm
is
+	Wallace, Gregory K.  "The JPEG Still Picture Compression
Standard",
+	Communications of the ACM, April 1991 (vol. 34 no. 4), pp.
30-44.
+(Adjacent articles in that issue discuss MPEG motion picture
compression,
+applications of JPEG, and related topics.)  If you don't have the CACM
issue
+handy, a PostScript file containing a revised version of Wallace's
article is
+available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz.  The file
(actually
+a preprint for an article that appeared in IEEE Trans. Consumer
Electronics)
+omits the sample images that appeared in CACM, but it includes
corrections
+and some added material.  Note: the Wallace article is copyright ACM
and IEEE,
+and it may not be used for commercial purposes.
+
+A somewhat less technical, more leisurely introduction to JPEG can be
found in
+"The Data Compression Book" by Mark Nelson and Jean-loup Gailly,
published by
+M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1.  This book
provides
+good explanations and example C code for a multitude of compression
methods
+including JPEG.  It is an excellent source if you are comfortable
reading C
+code but don't know much about data compression in general.  The book's
JPEG
+sample code is far from industrial-strength, but when you are ready to
look
+at a full implementation, you've got one here...
+
+The best full description of JPEG is the textbook "JPEG Still Image
Data
+Compression Standard" by William B. Pennebaker and Joan L. Mitchell,
published
+by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1.  Price US$59.95,
638 pp.
+The book includes the complete text of the ISO JPEG standards (DIS
10918-1
+and draft DIS 10918-2).  This is by far the most complete exposition of
JPEG
+in existence, and we highly recommend it.
+
+The JPEG standard itself is not available electronically; you must
order a
+paper copy through ISO or ITU.  (Unless you feel a need to own a
certified
+official copy, we recommend buying the Pennebaker and Mitchell book
instead;
+it's much cheaper and includes a great deal of useful explanatory
material.)
+In the USA, copies of the standard may be ordered from ANSI Sales at
(212)
+642-4900, or from Global Engineering Documents at (800) 854-7179.
(ANSI
+doesn't take credit card orders, but Global does.)  It's not cheap: as
of
+1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7%
+shipping/handling.  The standard is divided into two parts, Part 1
being the
+actual specification, while Part 2 covers compliance testing methods.
Part 1
+is titled "Digital Compression and Coding of Continuous-tone Still
Images,
+Part 1: Requirements and guidelines" and has document numbers ISO/IEC
IS
+10918-1, ITU-T T.81.  Part 2 is titled "Digital Compression and Coding
of
+Continuous-tone Still Images, Part 2: Compliance testing" and has
document
+numbers ISO/IEC IS 10918-2, ITU-T T.83.
+
+Some extensions to the original JPEG standard are defined in JPEG Part
3,
+a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84.  IJG
+currently does not support any Part 3 extensions.
+
+The JPEG standard does not specify all details of an interchangeable
file
+format.  For the omitted details we follow the "JFIF" conventions,
revision
+1.02.  A copy of the JFIF spec is available from:
+	Literature Department
+	C-Cube Microsystems, Inc.
+	1778 McCarthy Blvd.
+	Milpitas, CA 95035
+	phone (408) 944-6300,  fax (408) 944-6314
+A PostScript version of this document is available by FTP at
+ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz.  There is also a plain text
+version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is
missing
+the figures.
+
+The TIFF 6.0 file format specification can be obtained by FTP from
+ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz.  The JPEG incorporation
scheme
+found in the TIFF 6.0 spec of 3-June-92 has a number of serious
problems.
+IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag
6).
+Instead, we recommend the JPEG design proposed by TIFF Technical Note
#2
+(Compression tag 7).  Copies of this Note can be obtained from
ftp.sgi.com or
+from ftp://ftp.uu.net/graphics/jpeg/.  It is expected that the next
revision
+of the TIFF spec will replace the 6.0 JPEG design with the Note's
design.
+Although IJG's own code does not support TIFF/JPEG, the free libtiff
library
+uses our library to implement TIFF/JPEG per the Note.  libtiff is
available
+from ftp://ftp.sgi.com/graphics/tiff/.
+
+
+ARCHIVE LOCATIONS
+=================
+
+The "official" archive site for this software is ftp.uu.net (Internet
+address 192.48.96.9).  The most recent released version can always be
found
+there in directory graphics/jpeg.  This particular version will be
archived
+as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz.  If you don't
have
+direct Internet access, UUNET's archives are also available via UUCP;
contact
+help at uunet.uu.net for information on retrieving files that way.
+
+Numerous Internet sites maintain copies of the UUNET files.  However,
only
+ftp.uu.net is guaranteed to have the latest official version.
+
+You can also obtain this software in DOS-compatible "zip" archive
format from
+the SimTel archives
(ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or
+on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library
12
+"JPEG Tools".  Again, these versions may sometimes lag behind the
ftp.uu.net
+release.
+
+The JPEG FAQ (Frequently Asked Questions) article is a useful source of
+general information about JPEG.  It is updated constantly and therefore
is
+not included in this distribution.  The FAQ is posted every two weeks
to
+Usenet newsgroups comp.graphics.misc, news.answers, and other groups.
+It is available on the World Wide Web at
http://www.faqs.org/faqs/jpeg-faq/
+and other news.answers archive sites, including the official
news.answers
+archive at rtfm.mit.edu:
ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/.
+If you don't have Web or FTP access, send e-mail to
mail-server at rtfm.mit.edu
+with body
+	send usenet/news.answers/jpeg-faq/part1
+	send usenet/news.answers/jpeg-faq/part2
+
+
+RELATED SOFTWARE
+================
+
+Numerous viewing and image manipulation programs now support JPEG.
(Quite a
+few of them use this library to do so.)  The JPEG FAQ described above
lists
+some of the more popular free and shareware viewers, and tells where to
+obtain them on Internet.
+
+If you are on a Unix machine, we highly recommend Jef Poskanzer's free
+PBMPLUS software, which provides many useful operations on PPM-format
image
+files.  In particular, it can convert PPM images to and from a wide
range of
+other formats, thus making cjpeg/djpeg considerably more useful.  The
latest
+version is distributed by the NetPBM group, and is available from
numerous
+sites, notably
ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/.
+Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG
software is;
+you are likely to have difficulty making it work on any non-Unix
machine.
+
+A different free JPEG implementation, written by the PVRG group at
Stanford,
+is available from ftp://havefun.stanford.edu/pub/jpeg/.  This program
+is designed for research and experimentation rather than production
use;
+it is slower, harder to use, and less portable than the IJG code, but
it
+is easier to read and modify.  Also, the PVRG code supports lossless
JPEG,
+which we do not.  (On the other hand, it doesn't do progressive JPEG.)
+
+
+FILE FORMAT WARS
+================
+
+Some JPEG programs produce files that are not compatible with our
library.
+The root of the problem is that the ISO JPEG committee failed to
specify a
+concrete file format.  Some vendors "filled in the blanks" on their
own,
+creating proprietary formats that no one else could read.  (For
example, none
+of the early commercial JPEG implementations for the Macintosh were
able to
+exchange compressed files.)
+
+The file format we have adopted is called JFIF (see REFERENCES).  This
format
+has been agreed to by a number of major commercial JPEG vendors, and it
has
+become the de facto standard.  JFIF is a minimal or "low end"
representation.
+We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by
TIFF
+Technical Note #2) for "high end" applications that need to record a
lot of
+additional data about an image.  TIFF/JPEG is fairly new and not yet
widely
+supported, unfortunately.
+
+The upcoming JPEG Part 3 standard defines a file format called SPIFF.
+SPIFF is interoperable with JFIF, in the sense that most JFIF decoders
should
+be able to read the most common variant of SPIFF.  SPIFF has some
technical
+advantages over JFIF, but its major claim to fame is simply that it is
an
+official standard rather than an informal one.  At this point it is
unclear
+whether SPIFF will supersede JFIF or whether JFIF will remain the
de-facto
+standard.  IJG intends to support SPIFF once the standard is frozen,
but we
+have not decided whether it should become our default output format or
not.
+(In any case, our decoder will remain capable of reading JFIF
indefinitely.)
+
+Various proprietary file formats incorporating JPEG compression also
exist.
+We have little or no sympathy for the existence of these formats.
Indeed,
+one of the original reasons for developing this free software was to
help
+force convergence on common, open format standards for JPEG files.
Don't
+use a proprietary file format!
+
+
+TO DO
+=====
+
+The major thrust for v7 will probably be improvement of visual quality.
+The current method for scaling the quantization tables is known not to
be
+very good at low Q values.  We also intend to investigate block
boundary
+smoothing, "poor man's variable quantization", and other means of
improving
+quality-vs-file-size performance without sacrificing compatibility.
+
+In future versions, we are considering supporting some of the upcoming
JPEG
+Part 3 extensions --- principally, variable quantization and the SPIFF
file
+format.
+
+As always, speeding things up is of great interest.
+
+Please send bug reports, offers of help, etc. to
jpeg-info at uunet.uu.net.
  _____  

Added: vendor/libjpeg/current/ansi2knr.1
--- vendor/libjpeg/current/ansi2knr.1	2005-12-30 00:18:48 UTC (rev
20449)
+++ vendor/libjpeg/current/ansi2knr.1	2005-12-30 01:00:43 UTC (rev
20450)
@@ -0,0 +1,36 @@

+.TH ANSI2KNR 1 "19 Jan 1996"
+.SH NAME
+ansi2knr \- convert ANSI C to Kernighan & Ritchie C
+.SH SYNOPSIS
+.I ansi2knr
+[--varargs] input_file [output_file]
+.SH DESCRIPTION
+If no output_file is supplied, output goes to stdout.
+.br
+There are no error messages.
+.sp
+.I ansi2knr
+recognizes function definitions by seeing a non-keyword identifier at
the left
+margin, followed by a left parenthesis, with a right parenthesis as the
last
+character on the line, and with a left brace as the first token on the
+following line (ignoring possible intervening comments).  It will
recognize a
+multi-line header provided that no intervening line ends with a left or
right
+brace or a semicolon.  These algorithms ignore whitespace and comments,
except
+that the function name must be the first thing on the line.
+.sp
+The following constructs will confuse it:
+.br
+     - Any other construct that starts at the left margin and follows
the
+above syntax (such as a macro or function call).
+.br
+     - Some macros that tinker with the syntax of the function header.
+.sp
+The --varargs switch is obsolete, and is recognized only for
+backwards compatibility.  The present version of
+.I ansi2knr
+will always attempt to convert a ... argument to va_alist and va_dcl.
+.SH AUTHOR
+L. Peter Deutsch <ghost at aladdin.com> wrote the original ansi2knr and
+continues to maintain the current version; most of the code in the
current
+version is his work.  ansi2knr also includes contributions by Francois
+Pinard <pinard at iro.umontreal.ca> and Jim Avera <jima at netcom.com>.
  _____  

Added: vendor/libjpeg/current/ansi2knr.c
--- vendor/libjpeg/current/ansi2knr.c	2005-12-30 00:18:48 UTC (rev
20449)
+++ vendor/libjpeg/current/ansi2knr.c	2005-12-30 01:00:43 UTC (rev
20450)
@@ -0,0 +1,693 @@

+/* ansi2knr.c */
+/* Convert ANSI C function definitions to K&R ("traditional C") syntax
*/
+
+/*
+ansi2knr is distributed in the hope that it will be useful, but WITHOUT
ANY
+WARRANTY.  No author or distributor accepts responsibility to anyone
for the
+consequences of using it or for whether it serves any particular
purpose or
+works at all, unless he says so in writing.  Refer to the GNU General
Public
+License (the "GPL") for full details.
+
+Everyone is granted permission to copy, modify and redistribute
ansi2knr,
+but only under the conditions described in the GPL.  A copy of this
license
+is supposed to have been given to you along with ansi2knr so you can
know
+your rights and responsibilities.  It should be in a file named
COPYLEFT.
+[In the IJG distribution, the GPL appears below, not in a separate
file.]
+Among other things, the copyright notice and this notice must be
preserved
+on all copies.
+
+We explicitly state here what we believe is already implied by the GPL:
if
+the ansi2knr program is distributed as a separate set of sources and a
+separate executable file which are aggregated on a storage medium
together
+with another program, this in itself does not bring the other program
under
+the GPL, nor does the mere fact that such a program or the procedures
for
+constructing it invoke the ansi2knr executable bring any other part of
the
+program under the GPL.
+*/
+
+/*
+---------- Here is the GNU GPL file COPYLEFT, referred to above
----------
+----- These terms do NOT apply to the JPEG software itself; see README
------
+
+		    GHOSTSCRIPT GENERAL PUBLIC LICENSE
+		    (Clarified 11 Feb 1988)
+
+ Copyright (C) 1988 Richard M. Stallman
+ Everyone is permitted to copy and distribute verbatim copies of this
+ license, but changing it is not allowed.  You can also use this
wording
+ to make the terms for other programs.
+
+  The license agreements of most software companies keep you at the
+mercy of those companies.  By contrast, our general public license is
+intended to give everyone the right to share Ghostscript.  To make sure
+that you get the rights we want you to have, we need to make
+restrictions that forbid anyone to deny you these rights or to ask you
+to surrender the rights.  Hence this license agreement.
+
+  Specifically, we want to make sure that you have the right to give
+away copies of Ghostscript, that you receive source code or else can
get
+it if you want it, that you can change Ghostscript or use pieces of it
+in new free programs, and that you know you can do these things.
+
+  To make sure that everyone has such rights, we have to forbid you to
+deprive anyone else of these rights.  For example, if you distribute
+copies of Ghostscript, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must tell them their rights.
+
+  Also, for our own protection, we must make certain that everyone
finds
+out that there is no warranty for Ghostscript.  If Ghostscript is
+modified by someone else and passed on, we want its recipients to know
+that what they have is not what we distributed, so that any problems
+introduced by others will not reflect on our reputation.
+
+  Therefore we (Richard M. Stallman and the Free Software Foundation,
+Inc.) make the following terms which say what you must do to be allowed
+to distribute or change Ghostscript.
+
+
+			COPYING POLICIES
+
+  1. You may copy and distribute verbatim copies of Ghostscript source
+code as you receive it, in any medium, provided that you conspicuously
+and appropriately publish on each copy a valid copyright and license
+notice "Copyright (C) 1989 Aladdin Enterprises.  All rights reserved.
+Distributed by Free Software Foundation, Inc." (or with whatever year
is
+appropriate); keep intact the notices on all files that refer to this
+License Agreement and to the absence of any warranty; and give any
other
+recipients of the Ghostscript program a copy of this License Agreement
+along with the program.  You may charge a distribution fee for the
+physical act of transferring a copy.
+
+  2. You may modify your copy or copies of Ghostscript or any portion
of
+it, and copy and distribute such modifications under the terms of
+Paragraph 1 above, provided that you also do the following:
+
+    a) cause the modified files to carry prominent notices stating
+    that you changed the files and the date of any change; and
+
+    b) cause the whole of any work that you distribute or publish,
+    that in whole or in part contains or is a derivative of Ghostscript
+    or any part thereof, to be licensed at no charge to all third
+    parties on terms identical to those contained in this License
+    Agreement (except that you may choose to grant more extensive
+    warranty protection to some or all third parties, at your option).
+
+    c) You may charge a distribution fee for the physical act of
+    transferring a copy, and you may at your option offer warranty
+    protection in exchange for a fee.
+
+Mere aggregation of another unrelated program with this program (or its
+derivative) on a volume of a storage or distribution medium does not
bring
+the other program under the scope of these terms.
+
+  3. You may copy and distribute Ghostscript (or a portion or
derivative
+of it, under Paragraph 2) in object code or executable form under the
+terms of Paragraphs 1 and 2 above provided that you also do one of the
+following:
+
+    a) accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of
+    Paragraphs 1 and 2 above; or,
+
+    b) accompany it with a written offer, valid for at least three
+    years, to give any third party free (except for a nominal
+    shipping charge) a complete machine-readable copy of the
+    corresponding source code, to be distributed under the terms of
+    Paragraphs 1 and 2 above; or,
+
+    c) accompany it with the information you received as to where the
+    corresponding source code may be obtained.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form alone.)
+
+For an executable file, complete source code means all the source code
for
+all modules it contains; but, as a special exception, it need not
include
+source code for modules which are standard libraries that accompany the
+operating system on which the executable file runs.
+
+  4. You may not copy, sublicense, distribute or transfer Ghostscript
+except as expressly provided under this License Agreement.  Any attempt
+otherwise to copy, sublicense, distribute or transfer Ghostscript is
+void and your rights to use the program under this License agreement
+shall be automatically terminated.  However, parties who have received
+computer software programs from you with this License Agreement will
not
+have their licenses terminated so long as such parties remain in full
+compliance.
+
+  5. If you wish to incorporate parts of Ghostscript into other free
+programs whose distribution conditions are different, write to the Free
+Software Foundation at 675 Mass Ave, Cambridge, MA 02139.  We have not
+yet worked out a simple rule that can be stated here, but we will often
+permit this.  We will be guided by the two goals of preserving the free
+status of all derivatives of our free software and of promoting the
+sharing and reuse of software.
+
+Your comments and suggestions about our licensing policies and our
+software are welcome!  Please contact the Free Software Foundation,
+Inc., 675 Mass Ave, Cambridge, MA 02139, or call (617) 876-3296.
+
+		       NO WARRANTY
+
+  BECAUSE GHOSTSCRIPT IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY
+NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW.  EXCEPT
+WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC,
RICHARD
+M. STALLMAN, ALADDIN ENTERPRISES, L. PETER DEUTSCH, AND/OR OTHER
PARTIES
+PROVIDE GHOSTSCRIPT "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
+EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE
+ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF GHOSTSCRIPT IS WITH
+YOU.  SHOULD GHOSTSCRIPT PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
+NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M.
+STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., L. PETER DEUTSCH, ALADDIN
+ENTERPRISES, AND/OR ANY OTHER PARTY WHO MAY MODIFY AND REDISTRIBUTE
+GHOSTSCRIPT AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
+ANY LOST PROFITS, LOST MONIES, OR OTHER SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
+(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
+INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR A FAILURE OF THE
+PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) GHOSTSCRIPT, EVEN IF YOU
+HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM
+BY ANY OTHER PARTY.
+
+-------------------- End of file COPYLEFT
------------------------------
+*/
+
+/*
+ * Usage:
+	ansi2knr input_file [output_file]
+ * If no output_file is supplied, output goes to stdout.
+ * There are no error messages.
+ *
+ * ansi2knr recognizes function definitions by seeing a non-keyword
+ * identifier at the left margin, followed by a left parenthesis,
+ * with a right parenthesis as the last character on the line,
+ * and with a left brace as the first token on the following line
+ * (ignoring possible intervening comments).
+ * It will recognize a multi-line header provided that no intervening
+ * line ends with a left or right brace or a semicolon.
+ * These algorithms ignore whitespace and comments, except that
+ * the function name must be the first thing on the line.
+ * The following constructs will confuse it:
+ *	- Any other construct that starts at the left margin and
+ *	    follows the above syntax (such as a macro or function call).
+ *	- Some macros that tinker with the syntax of the function
header.
+ */
+
+/*
+ * The original and principal author of ansi2knr is L. Peter Deutsch
+ * <ghost at aladdin.com>.  Other authors are noted in the change history
+ * that follows (in reverse chronological order):
+	lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with
+		compilers that don't understand void, as suggested by
+		Tom Lane
+	lpd 96-01-15 changed to require that the first non-comment token
+		on the line following a function header be a left brace,
+		to reduce sensitivity to macros, as suggested by Tom
Lane
+		<tgl at sss.pgh.pa.us>
+	lpd 95-06-22 removed #ifndefs whose sole purpose was to define
+		undefined preprocessor symbols as 0; changed all #ifdefs
+		for configuration symbols to #ifs
+	lpd 95-04-05 changed copyright notice to make it clear that
+		including ansi2knr in a program does not bring the
entire
+		program under the GPL
+	lpd 94-12-18 added conditionals for systems where ctype macros
+		don't handle 8-bit characters properly, suggested by
+		Francois Pinard <pinard at iro.umontreal.ca>;
+		removed --varargs switch (this is now the default)
+	lpd 94-10-10 removed CONFIG_BROKETS conditional
+	lpd 94-07-16 added some conditionals to help GNU `configure',
+		suggested by Francois Pinard <pinard at iro.umontreal.ca>;
+		properly erase prototype args in function parameters,
+		contributed by Jim Avera <jima at netcom.com>;
+		correct error in writeblanks (it shouldn't erase EOLs)
+	lpd 89-xx-xx original version
+ */
+
+/* Most of the conditionals here are to make ansi2knr work with */
+/* or without the GNU configure machinery. */
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdio.h>
+#include <ctype.h>
+
+#if HAVE_CONFIG_H
+
+/*
+   For properly autoconfiguring ansi2knr, use
AC_CONFIG_HEADER(config.h).
+   This will define HAVE_CONFIG_H and so, activate the following lines.
+ */
+
+# if STDC_HEADERS || HAVE_STRING_H
+#  include <string.h>
+# else
+#  include <strings.h>
+# endif
+
+#else /* not HAVE_CONFIG_H */
+
+/* Otherwise do it the hard way */
+
+# ifdef BSD
+#  include <strings.h>
+# else
+#  ifdef VMS
+    extern int strlen(), strncmp();
+#  else
+#   include <string.h>
+#  endif
+# endif
+
+#endif /* not HAVE_CONFIG_H */
+
+#if STDC_HEADERS
+# include <stdlib.h>
+#else
+/*
+   malloc and free should be declared in stdlib.h,
+   but if you've got a K&R compiler, they probably aren't.
+ */
+# ifdef MSDOS
+#  include <malloc.h>
+# else
+#  ifdef VMS
+     extern char *malloc();
+     extern void free();
+#  else
+     extern char *malloc();
+     extern int free();
+#  endif
+# endif
+
+#endif
+
+/*
+ * The ctype macros don't always handle 8-bit characters correctly.
+ * Compensate for this here.
+ */
+#ifdef isascii
+#  undef HAVE_ISASCII		/* just in case */
+#  define HAVE_ISASCII 1
+#else
+#endif
+#if STDC_HEADERS || !HAVE_ISASCII
+#  define is_ascii(c) 1
+#else
+#  define is_ascii(c) isascii(c)
+#endif
+
+#define is_space(c) (is_ascii(c) && isspace(c))
+#define is_alpha(c) (is_ascii(c) && isalpha(c))
+#define is_alnum(c) (is_ascii(c) && isalnum(c))
+
+/* Scanning macros */
+#define isidchar(ch) (is_alnum(ch) || (ch) == '_')
+#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
+
+/* Forward references */
+char *skipspace();
+int writeblanks();
+int test1();
+int convert1();
+
+/* The main program */
+int
+main(argc, argv)
+    int argc;
+    char *argv[];
+{	FILE *in, *out;
+#define bufsize 5000			/* arbitrary size */
+	char *buf;
+	char *line;
+	char *more;
+	/*
+	 * In previous versions, ansi2knr recognized a --varargs switch.
+	 * If this switch was supplied, ansi2knr would attempt to
convert
+	 * a ... argument to va_alist and va_dcl; if this switch was not
+	 * supplied, ansi2knr would simply drop any such arguments.
+	 * Now, ansi2knr always does this conversion, and we only
+	 * check for this switch for backward compatibility.
+	 */
+	int convert_varargs = 1;
+
+	if ( argc > 1 && argv[1][0] == '-' )
+	  {	if ( !strcmp(argv[1], "--varargs") )
+		  {	convert_varargs = 1;
+			argc--;
+			argv++;
+		  }
+		else
+		  {	fprintf(stderr, "Unrecognized switch: %s\n",
argv[1]);
+			exit(1);
+		  }
+	  }
+	switch ( argc )
+	   {
+	default:
+		printf("Usage: ansi2knr input_file [output_file]\n");
+		exit(0);
+	case 2:
+		out = stdout;
+		break;
+	case 3:
+		out = fopen(argv[2], "w");
+		if ( out == NULL )
+		   {	fprintf(stderr, "Cannot open output file %s\n",
argv[2]);
+			exit(1);
+		   }
+	   }
+	in = fopen(argv[1], "r");
+	if ( in == NULL )
+	   {	fprintf(stderr, "Cannot open input file %s\n", argv[1]);
+		exit(1);
+	   }
+	fprintf(out, "#line 1 \"%s\"\n", argv[1]);
+	buf = malloc(bufsize);
+	line = buf;
+	while ( fgets(line, (unsigned)(buf + bufsize - line), in) !=
NULL )
+	   {
+test:		line += strlen(line);
+		switch ( test1(buf) )
+		   {
+		case 2:			/* a function header */
+			convert1(buf, out, 1, convert_varargs);
+			break;
+		case 1:			/* a function */
+			/* Check for a { at the start of the next line.
*/
+			more = ++line;
+f:			if ( line >= buf + (bufsize - 1) ) /* overflow
check */
+			  goto wl;
+			if ( fgets(line, (unsigned)(buf + bufsize -
line), in) == NULL )
+			  goto wl;
+			switch ( *skipspace(more, 1) )
+			  {
+			  case '{':
+			    /* Definitely a function header. */
+			    convert1(buf, out, 0, convert_varargs);
+			    fputs(more, out);
+			    break;
+			  case 0:
+			    /* The next line was blank or a comment: */
+			    /* keep scanning for a non-comment. */
+			    line += strlen(line);
+			    goto f;
+			  default:
+			    /* buf isn't a function header, but */
+			    /* more might be. */
+			    fputs(buf, out);
+			    strcpy(buf, more);
+			    line = buf;
+			    goto test;
+			  }
+			break;
+		case -1:		/* maybe the start of a function
*/
+			if ( line != buf + (bufsize - 1) ) /* overflow
check */
+			  continue;
+			/* falls through */
+		default:		/* not a function */
+wl:			fputs(buf, out);
+			break;
+		   }
+		line = buf;
+	   }
+	if ( line != buf )
+	  fputs(buf, out);
+	free(buf);
+	fclose(out);
+	fclose(in);
+	return 0;
+}
+
+/* Skip over space and comments, in either direction. */
+char *
+skipspace(p, dir)
+    register char *p;
+    register int dir;			/* 1 for forward, -1 for
backward */
+{	for ( ; ; )
+	   {	while ( is_space(*p) )
+		  p += dir;
+		if ( !(*p == '/' && p[dir] == '*') )
+		  break;
+		p += dir;  p += dir;
+		while ( !(*p == '*' && p[dir] == '/') )
+		   {	if ( *p == 0 )
+			  return p;	/* multi-line comment?? */
+			p += dir;
+		   }
+		p += dir;  p += dir;
+	   }
+	return p;
+}
+
+/*
+ * Write blanks over part of a string.
+ * Don't overwrite end-of-line characters.
+ */
+int
+writeblanks(start, end)
+    char *start;
+    char *end;
+{	char *p;
+	for ( p = start; p < end; p++ )
+	  if ( *p != '\r' && *p != '\n' )
+	    *p = ' ';
+	return 0;
+}
+
+/*
+ * Test whether the string in buf is a function definition.
+ * The string may contain and/or end with a newline.
+ * Return as follows:
+ *	0 - definitely not a function definition;
+ *	1 - definitely a function definition;
+ *	2 - definitely a function prototype (NOT USED);
+ *	-1 - may be the beginning of a function definition,
+ *		append another line and look again.
+ * The reason we don't attempt to convert function prototypes is that
+ * Ghostscript's declaration-generating macros look too much like
+ * prototypes, and confuse the algorithms.
+ */
+int
+test1(buf)
+    char *buf;
+{	register char *p = buf;
+	char *bend;
+	char *endfn;
+	int contin;
+
+	if ( !isidfirstchar(*p) )
+	  return 0;		/* no name at left margin */
+	bend = skipspace(buf + strlen(buf) - 1, -1);
+	switch ( *bend )
+	   {
+	   case ';': contin = 0 /*2*/; break;
+	   case ')': contin = 1; break;
+	   case '{': return 0;		/* not a function */
+	   case '}': return 0;		/* not a function */
+	   default: contin = -1;
+	   }
+	while ( isidchar(*p) )
+	  p++;
+	endfn = p;
+	p = skipspace(p, 1);
+	if ( *p++ != '(' )
+	  return 0;		/* not a function */
+	p = skipspace(p, 1);
+	if ( *p == ')' )
+	  return 0;		/* no parameters */
+	/* Check that the apparent function name isn't a keyword. */
+	/* We only need to check for keywords that could be followed */
+	/* by a left parenthesis (which, unfortunately, is most of
them). */
+	   {	static char *words[] =
+		   {	"asm", "auto", "case", "char", "const",
"double",
+			"extern", "float", "for", "if", "int", "long",
+			"register", "return", "short", "signed",
"sizeof",
+			"static", "switch", "typedef", "unsigned",
+			"void", "volatile", "while", 0
+		   };
+		char **key = words;
+		char *kp;
+		int len = endfn - buf;
+
+		while ( (kp = *key) != 0 )
+		   {	if ( strlen(kp) == len && !strncmp(kp, buf, len)
)
+			  return 0;	/* name is a keyword */
+			key++;
+		   }
+	   }
+	return contin;
+}
+
+/* Convert a recognized function definition or header to K&R syntax. */
+int
+convert1(buf, out, header, convert_varargs)
+    char *buf;
+    FILE *out;
+    int header;			/* Boolean */
+    int convert_varargs;	/* Boolean */
+{	char *endfn;
+	register char *p;
+	char **breaks;
+	unsigned num_breaks = 2;	/* for testing */
+	char **btop;
+	char **bp;
+	char **ap;
+	char *vararg = 0;
+
+	/* Pre-ANSI implementations don't agree on whether strchr */
+	/* is called strchr or index, so we open-code it here. */
+	for ( endfn = buf; *(endfn++) != '('; )
+	  ;
+top:	p = endfn;
+	breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
+	if ( breaks == 0 )
+	   {	/* Couldn't allocate break table, give up */
+		fprintf(stderr, "Unable to allocate break table!\n");
+		fputs(buf, out);
+		return -1;
+	   }
+	btop = breaks + num_breaks * 2 - 2;
+	bp = breaks;
+	/* Parse the argument list */
+	do
+	   {	int level = 0;
+		char *lp = NULL;
+		char *rp;
+		char *end = NULL;
+
+		if ( bp >= btop )
+		   {	/* Filled up break table. */
[truncated at 1000 lines; 57126 more skipped] 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.reactos.org/pipermail/ros-diffs/attachments/20051230/2b637774/attachment.html


More information about the Ros-diffs mailing list