[ros-diffs] [arty] 39799: Start of pull from git to svn.

arty at svn.reactos.org arty at svn.reactos.org
Sat Feb 28 07:23:02 CET 2009


Author: arty
Date: Sat Feb 28 09:23:01 2009
New Revision: 39799

URL: http://svn.reactos.org/svn/reactos?rev=39799&view=rev
Log:
Start of pull from git to svn.

Modified:
    branches/arty-newcc/CREDITS
    branches/arty-newcc/Doxyfile
    branches/arty-newcc/Makefile
    branches/arty-newcc/ReactOS-arm.rbuild
    branches/arty-newcc/ReactOS-generic.rbuild
    branches/arty-newcc/ReactOS-i386.rbuild
    branches/arty-newcc/baseaddress.rbuild
    branches/arty-newcc/config-arm.template.rbuild
    branches/arty-newcc/config-ppc.template.rbuild
    branches/arty-newcc/config.template.rbuild

Modified: branches/arty-newcc/CREDITS
URL: http://svn.reactos.org/svn/reactos/branches/arty-newcc/CREDITS?rev=39799&r1=39798&r2=39799&view=diff
==============================================================================
--- branches/arty-newcc/CREDITS [iso-8859-1] (original)
+++ branches/arty-newcc/CREDITS [iso-8859-1] Sat Feb 28 09:23:01 2009
@@ -48,6 +48,7 @@
 Mark Weaver <mark at npsl.co.uk>
 Martin Fuchs <martin-fuchs at gmx.net>
 Marty Dill <mdill at uvic.ca>
+Matthias Kupfer <mkupfer at reactos.org>
 Matt Pyne
 Mike Nordell <"tamlin">
 Nathan Woods <npwoods at mess.org>

Modified: branches/arty-newcc/Doxyfile
URL: http://svn.reactos.org/svn/reactos/branches/arty-newcc/Doxyfile?rev=39799&r1=39798&r2=39799&view=diff
==============================================================================
--- branches/arty-newcc/Doxyfile [iso-8859-1] (original)
+++ branches/arty-newcc/Doxyfile [iso-8859-1] Sat Feb 28 09:23:01 2009
@@ -1,4 +1,4 @@
-# Doxyfile 1.5.3
+# Doxyfile 1.5.8
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project
@@ -14,11 +14,11 @@
 # Project related configuration options
 #---------------------------------------------------------------------------
 
-# This tag specifies the encoding used for all characters in the config file that 
-# follow. The default is UTF-8 which is also the encoding used for all text before 
-# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into 
-# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of 
-# possible encodings.
+# This tag specifies the encoding used for all characters in the config file 
+# that follow. The default is UTF-8 which is also the encoding used for all 
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the 
+# iconv built into libc) for the transcoding. See 
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
 
 DOXYFILE_ENCODING      = UTF-8
 
@@ -31,14 +31,14 @@
 # This could be handy for archiving the generated documentation or 
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         = "ReactOS Source Code"
 
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
 # base path where the generated documentation will be put. 
 # If a relative path is entered, it will be relative to the location 
 # where doxygen was started. If left blank the current directory will be used.
 
-OUTPUT_DIRECTORY       = doxy-doc
+OUTPUT_DIRECTORY       = Doxygen
 
 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
 # 4096 sub-directories (in 2 levels) under the output directory of each output 
@@ -47,17 +47,18 @@
 # source files, where putting all generated files in the same directory would 
 # otherwise cause performance problems for the file system.
 
-CREATE_SUBDIRS         = NO
+CREATE_SUBDIRS         = YES
 
 # The OUTPUT_LANGUAGE tag is used to specify the language in which all 
 # documentation generated by doxygen is written. Doxygen will use this 
 # information to generate all constant output in the proper language. 
 # The default language is English, other supported languages are: 
 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 
-# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, 
-# Italian, Japanese, Japanese-en (Japanese with English messages), Korean, 
-# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, 
-# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
+# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, 
+# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), 
+# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, 
+# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, 
+# Spanish, Swedish, and Ukrainian.
 
 OUTPUT_LANGUAGE        = English
 
@@ -146,7 +147,7 @@
 # comments will behave just like regular Qt-style comments 
 # (thus requiring an explicit @brief command for a brief description.)
 
-JAVADOC_AUTOBRIEF      = YES
+JAVADOC_AUTOBRIEF      = NO
 
 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will 
 # interpret the first line (until the first dot) of a Qt-style 
@@ -164,13 +165,6 @@
 
 MULTILINE_CPP_IS_BRIEF = NO
 
-# If the DETAILS_AT_TOP tag is set to YES then Doxygen 
-# will output the detailed description near the top, like JavaDoc.
-# If set to NO, the detailed description appears after the member 
-# documentation.
-
-DETAILS_AT_TOP         = NO
-
 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
 # member inherits the documentation from any documented member that it 
 # re-implements.
@@ -186,7 +180,7 @@
 # The TAB_SIZE tag can be used to set the number of spaces in a tab. 
 # Doxygen uses this value to replace tabs by spaces in code fragments.
 
-TAB_SIZE               = 8
+TAB_SIZE               = 4
 
 # This tag can be used to specify a number of aliases that acts 
 # as commands in the documentation. An alias has the form "name=value". 
@@ -205,14 +199,37 @@
 OPTIMIZE_OUTPUT_FOR_C  = YES
 
 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 
-# sources only. Doxygen will then generate output that is more tailored for Java. 
-# For instance, namespaces will be presented as packages, qualified scopes 
-# will look different, etc.
+# sources only. Doxygen will then generate output that is more tailored for 
+# Java. For instance, namespaces will be presented as packages, qualified 
+# scopes will look different, etc.
 
 OPTIMIZE_OUTPUT_JAVA   = NO
 
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to 
-# include (a tag file for) the STL sources as input, then you should 
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran 
+# sources only. Doxygen will then generate output that is more tailored for 
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL 
+# sources. Doxygen will then generate output that is tailored for 
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it parses. 
+# With this tag you can assign which parser to use for a given extension. 
+# Doxygen has a built-in mapping, but you can override or extend it using this tag. 
+# The format is ext=language, where ext is a file extension, and language is one of 
+# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, 
+# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat 
+# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), 
+# use: inc=Fortran f=C
+
+EXTENSION_MAPPING      = 
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 
+# to include (a tag file for) the STL sources as input, then you should 
 # set this tag to YES in order to let doxygen match functions declarations and 
 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 
 # func(std::string) {}). This also make the inheritance and collaboration 
@@ -220,10 +237,25 @@
 
 BUILTIN_STL_SUPPORT    = NO
 
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# If you use Microsoft's C++/CLI language, you should set this option to YES to 
 # enable parsing support.
 
 CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. 
+# Doxygen will parse them like normal C++ but will assume all classes use public 
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter 
+# and setter methods for a property. Setting this option to YES (the default) 
+# will make doxygen to replace the get and set methods by a property in the 
+# documentation. This will only work if the methods are indeed getting or 
+# setting a simple type. If this is not the case, or you want to show the 
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
 
 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
 # tag is set to YES, then doxygen will reuse the documentation of the first 
@@ -240,6 +272,32 @@
 
 SUBGROUPING            = YES
 
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 
+# is documented as struct, union, or enum with the name of the typedef. So 
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct 
+# with name TypeT. When disabled the typedef will appear as a member of a file, 
+# namespace, or class. And the struct will be named TypeS. This can typically 
+# be useful for C code in case the coding convention dictates that all compound 
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = YES
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to 
+# determine which symbols to keep in memory and which to flush to disk. 
+# When the cache is full, less often used symbols will be written to disk. 
+# For small to medium size projects (<1000 input files) the default value is 
+# probably good enough. For larger projects a too small cache size can cause 
+# doxygen to be busy swapping symbols to and from disk most of the time 
+# causing a significant performance penality. 
+# If the system has enough physical memory increasing the cache will improve the 
+# performance by keeping more symbols in memory. Note that the value works on 
+# a logarithmic scale so increasing the size by one will rougly double the 
+# memory usage. The cache size is given by this formula: 
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, 
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
 #---------------------------------------------------------------------------
 # Build related configuration options
 #---------------------------------------------------------------------------
@@ -274,10 +332,11 @@
 
 EXTRACT_LOCAL_METHODS  = NO
 
-# If this flag is set to YES, the members of anonymous namespaces will be extracted 
-# and appear in the documentation as a namespace called 'anonymous_namespace{file}', 
-# where file will be replaced with the base name of the file that contains the anonymous 
-# namespace. By default anonymous namespace are hidden.
+# If this flag is set to YES, the members of anonymous namespaces will be 
+# extracted and appear in the documentation as a namespace called 
+# 'anonymous_namespace{file}', where file will be replaced with the base 
+# name of the file that contains the anonymous namespace. By default 
+# anonymous namespace are hidden.
 
 EXTRACT_ANON_NSPACES   = NO
 
@@ -315,7 +374,7 @@
 # to NO (the default) then the documentation will be excluded. 
 # Set it to YES to include the internal documentation.
 
-INTERNAL_DOCS          = YES
+INTERNAL_DOCS          = NO
 
 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
 # file names in lower-case letters. If set to YES upper-case letters are also 
@@ -356,11 +415,17 @@
 
 SORT_BRIEF_DOCS        = NO
 
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the 
+# hierarchy of group names into alphabetical order. If set to NO (the default) 
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
 # sorted by fully-qualified names, including namespaces. If set to 
 # NO (the default), the class list will be sorted only by class name, 
 # not including the namespace part. 
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. 
 # Note: This option applies only to the class list, not to the 
 # alphabetical list.
 
@@ -415,17 +480,38 @@
 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
 # in the documentation. The default is NO.
 
-SHOW_DIRECTORIES       = NO
+SHOW_DIRECTORIES       = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. 
+# This will remove the Files entry from the Quick Index and from the 
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the 
+# Namespaces page.  This will remove the Namespaces entry from the Quick Index 
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = NO
 
 # The FILE_VERSION_FILTER tag can be used to specify a program or script that 
-# doxygen should invoke to get the current version for each file (typically from the 
-# version control system). Doxygen will invoke the program by executing (via 
+# doxygen should invoke to get the current version for each file (typically from 
+# the version control system). Doxygen will invoke the program by executing (via 
 # popen()) the command <command> <input-file>, where <command> is the value of 
 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
 # provided by doxygen. Whatever the program writes to standard output 
 # is used as the file version. See the manual for examples.
 
 FILE_VERSION_FILTER    = 
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by 
+# doxygen. The layout file controls the global structure of the generated output files 
+# in an output format independent way. The create the layout file that represents 
+# doxygen's defaults, run doxygen with the -l option. You can optionally specify a 
+# file name after the option, if omitted DoxygenLayout.xml will be used as the name 
+# of the layout file.
+
+LAYOUT_FILE            = 
 
 #---------------------------------------------------------------------------
 # configuration options related to warning and progress messages
@@ -470,7 +556,7 @@
 # $version, which will be replaced by the version of the file (if it could 
 # be obtained via FILE_VERSION_FILTER)
 
-WARN_FORMAT            = "$file:$line: $text "
+WARN_FORMAT            = "$file:$line: $text"
 
 # The WARN_LOGFILE tag can be used to specify a file to which warning 
 # and error messages should be written. If left blank the output is written 
@@ -487,12 +573,13 @@
 # directories like "/usr/src/myproject". Separate the files or directories 
 # with spaces.
 
-INPUT                  =
-
-# This tag can be used to specify the character encoding of the source files that 
-# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default 
-# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. 
-# See http://www.gnu.org/software/libiconv for the list of possible encodings.
+INPUT                  = 
+
+# This tag can be used to specify the character encoding of the source files 
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 
+# also the default input encoding. Doxygen uses libiconv (or the iconv built 
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 
+# the list of possible encodings.
 
 INPUT_ENCODING         = UTF-8
 
@@ -501,13 +588,16 @@
 # and *.h) to filter out the source-files in the directories. If left 
 # blank the following patterns are tested: 
 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
 
 FILE_PATTERNS          = *.c \
+                         *.cxx \
+                         *.cpp \
+                         *.c++ \
                          *.h \
-                         *.cpp \
-                         *.cc \
-                         *.cx
+                         *.hh \
+                         *.hpp \
+                         *.idl
 
 # The RECURSIVE tag can be used to turn specify whether or not subdirectories 
 # should be searched for input files as well. Possible values are YES and NO. 
@@ -519,8 +609,7 @@
 # excluded from the INPUT source files. This way you can easily exclude a 
 # subdirectory from a directory tree whose root is specified with the INPUT tag.
 
-EXCLUDE                = subsystems/win32/win32k \
-                         base/shell/explorer
+EXCLUDE                = 
 
 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
 # directories that are symbolic links (a Unix filesystem feature) are excluded 
@@ -534,12 +623,13 @@
 # against the file with absolute path, so to exclude all test directories 
 # for example use the pattern */test/*
 
-EXCLUDE_PATTERNS       = 
+EXCLUDE_PATTERNS       = */.svn
 
 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 
-# (namespaces, classes, functions, etc.) that should be excluded from the output. 
-# The symbol name can be a fully qualified name, a word, or if the wildcard * is used, 
-# a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test
+# (namespaces, classes, functions, etc.) that should be excluded from the 
+# output. The symbol name can be a fully qualified name, a word, or if the 
+# wildcard * is used, a substring. Examples: ANamespace, AClass, 
+# AClass::ANamespace, ANamespace::*Test
 
 EXCLUDE_SYMBOLS        = 
 
@@ -561,7 +651,7 @@
 # commands irrespective of the value of the RECURSIVE tag. 
 # Possible values are YES and NO. If left blank NO is used.
 
-EXAMPLE_RECURSIVE      = YES
+EXAMPLE_RECURSIVE      = NO
 
 # The IMAGE_PATH tag can be used to specify one or more files or 
 # directories that contain image that are included in the documentation (see 
@@ -601,9 +691,7 @@
 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
 # be generated. Documented entities will be cross-referenced with these sources. 
 # Note: To get rid of all source code in the generated output, make sure also 
-# VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH 
-# then you must also enable this option. If you don't then doxygen will produce 
-# a warning and turn it on anyway
+# VERBATIM_HEADERS is set to NO.
 
 SOURCE_BROWSER         = YES
 
@@ -618,22 +706,22 @@
 
 STRIP_CODE_COMMENTS    = YES
 
-# If the REFERENCED_BY_RELATION tag is set to YES (the default) 
+# If the REFERENCED_BY_RELATION tag is set to YES 
 # then for each documented function all documented 
 # functions referencing it will be listed.
 
-REFERENCED_BY_RELATION = YES
-
-# If the REFERENCES_RELATION tag is set to YES (the default) 
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES 
 # then for each documented function all documented entities 
 # called/used by that function will be listed.
 
-REFERENCES_RELATION    = YES
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code.  Otherwise they will link to the documentstion.
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) 
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from 
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will 
+# link to the source code.  Otherwise they will link to the documentation.
 
 REFERENCES_LINK_SOURCE = YES
 
@@ -665,7 +753,7 @@
 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
 # in which this list will be split (can be a number in the range [1..20])
 
-COLS_IN_ALPHA_INDEX    = 5
+COLS_IN_ALPHA_INDEX    = 3
 
 # In case all classes in a project start with a common prefix, all 
 # classes will be put under the same header in the alphabetical index. 
@@ -699,13 +787,13 @@
 # each generated HTML page. If it is left blank doxygen will generate a 
 # standard header.
 
-HTML_HEADER            = 
+HTML_HEADER            = Doxygen/header.html
 
 # The HTML_FOOTER tag can be used to specify a personal HTML footer for 
 # each generated HTML page. If it is left blank doxygen will generate a 
 # standard footer.
 
-HTML_FOOTER            = 
+HTML_FOOTER            = Doxygen/footer.html
 
 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
 # style sheet that is used by each HTML page. It can be used to 
@@ -722,13 +810,6 @@
 
 HTML_ALIGN_MEMBERS     = YES
 
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
-# will be generated that can be used as input for tools like the 
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP      = NO
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 
 # documentation will contain sections that can be hidden and shown after the 
 # page has loaded. For this to work a browser that supports 
@@ -737,6 +818,39 @@
 
 HTML_DYNAMIC_SECTIONS  = NO
 
+# If the GENERATE_DOCSET tag is set to YES, additional index files 
+# will be generated that can be used as input for Apple's Xcode 3 
+# integrated development environment, introduced with OSX 10.5 (Leopard). 
+# To create a documentation set, doxygen will generate a Makefile in the 
+# HTML output directory. Running make will produce the docset in that 
+# directory and running "make install" will install the docset in 
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 
+# it at startup. 
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the 
+# feed. A documentation feed provides an umbrella under which multiple 
+# documentation sets from a single provider (such as a company or product suite) 
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that 
+# should uniquely identify the documentation set bundle. This should be a 
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen 
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
+# will be generated that can be used as input for tools like the 
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) 
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
 # be used to specify the file name of the resulting .chm file. You 
 # can add a path in front of the file if the result should not be 
@@ -757,6 +871,12 @@
 
 GENERATE_CHI           = NO
 
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING 
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file 
+# content.
+
+CHM_INDEX_ENCODING     = 
+
 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
 # controls whether a binary table of contents is generated (YES) or a 
 # normal table of contents (NO) in the .chm file.
@@ -768,31 +888,96 @@
 
 TOC_EXPAND             = NO
 
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER 
+# are set, an additional index file will be generated that can be used as input for 
+# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated 
+# HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can 
+# be used to specify the file name of the resulting .qch file. 
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               = 
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating 
+# Qt Help Project output. For more information please see 
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating 
+# Qt Help Project output. For more information please see 
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. 
+# For more information please see 
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   = 
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see 
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  = 
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's 
+# filter section matches. 
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  = 
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can 
+# be used to specify the location of Qt's qhelpgenerator. 
+# If non-empty doxygen will try to run qhelpgenerator on the generated 
+# .qhp file.
+
+QHG_LOCATION           = 
+
 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
 # top of each HTML page. The value NO (the default) enables the index and 
 # the value YES disables it.
 
-DISABLE_INDEX          = NO
+DISABLE_INDEX          = YES
 
 # This tag can be used to set the number of enum values (range [1..20]) 
 # that doxygen will group on one line in the generated HTML documentation.
 
 ENUM_VALUES_PER_LINE   = 4
 
-# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
-# generated containing a tree-like index structure (just like the one that 
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index 
+# structure should be generated to display hierarchical information. 
+# If the tag value is set to FRAME, a side panel will be generated 
+# containing a tree-like index structure (just like the one that 
 # is generated for HTML Help). For this to work a browser that supports 
 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
-# probably better off using the HTML help feature.
-
-GENERATE_TREEVIEW      = NO
+# probably better off using the HTML help feature. Other possible values 
+# for this tag are: HIERARCHIES, which will generate the Groups, Directories, 
+# and Class Hierarchy pages using a tree view instead of an ordered list; 
+# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which 
+# disables this behavior completely. For backwards compatibility with previous 
+# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE 
+# respectively.
+
+GENERATE_TREEVIEW      = NONE
 
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
 # used to set the initial width (in pixels) of the frame in which the tree 
 # is shown.
 
 TREEVIEW_WIDTH         = 250
+
+# Use this tag to change the font size of Latex formulas included 
+# as images in the HTML documentation. The default is 10. Note that 
+# when you change the font size after a successful doxygen run you need 
+# to manually remove any form_*.png images from the HTML output directory 
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
 
 #---------------------------------------------------------------------------
 # configuration options related to the LaTeX output
@@ -849,13 +1034,13 @@
 # contain links (just like the HTML output) instead of page references 
 # This makes the output suitable for online browsing using a pdf viewer.
 
-PDF_HYPERLINKS         = NO
+PDF_HYPERLINKS         = YES
 
 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
 # plain latex in the generated Makefile. Set this option to YES to get a 
 # higher quality PDF documentation.
 
-USE_PDFLATEX           = NO
+USE_PDFLATEX           = YES
 
 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
 # command to the generated LaTeX files. This will instruct LaTeX to keep 
@@ -890,7 +1075,7 @@
 # RTF documents. This may be useful for small projects and may help to 
 # save some trees in general.
 
-COMPACT_RTF            = YES
+COMPACT_RTF            = NO
 
 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
 # will contain hyperlink fields. The RTF file will 
@@ -899,7 +1084,7 @@
 # programs which support those fields. 
 # Note: wordpad (write) and others do not support links.
 
-RTF_HYPERLINKS         = YES
+RTF_HYPERLINKS         = NO
 
 # Load stylesheet definitions from file. Syntax is similar to doxygen's 
 # config file, i.e. a series of assignments. You only have to provide 
@@ -948,7 +1133,7 @@
 # generate an XML file that captures the structure of 
 # the code including all documentation.
 
-GENERATE_XML           = YES
+GENERATE_XML           = NO
 
 # The XML_OUTPUT tag is used to specify where the XML pages will be put. 
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
@@ -1052,14 +1237,14 @@
 # contain include files that are not input files but should be processed by 
 # the preprocessor.
 
-INCLUDE_PATH           = include
+INCLUDE_PATH           = 
 
 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
 # patterns (like *.h and *.hpp) to filter out the header-files in the 
 # directories. If left blank, the patterns specified with FILE_PATTERNS will 
 # be used.
 
-INCLUDE_FILE_PATTERNS  = *.h
+INCLUDE_FILE_PATTERNS  = 
 
 # The PREDEFINED tag can be used to specify one or more macro names that 
 # are defined before the preprocessor is started (similar to the -D option of 
@@ -1099,9 +1284,9 @@
 #   TAGFILES = file1=loc1 "file2 = loc2" ... 
 # where "loc1" and "loc2" can be relative or absolute paths or 
 # URLs. If a location is present for each tag, the installdox tool 
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
+# does not have to be run to correct the links. 
+# Note that each tag file must have a unique name 
+# (where the name does NOT include the path) 
 # If a tag file is not located in the directory in which doxygen 
 # is run, you must also specify the path to the tagfile here.
 
@@ -1143,10 +1328,11 @@
 CLASS_DIAGRAMS         = NO
 
 # You can define message sequence charts within doxygen comments using the \msc 
-# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to 
-# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to 
-# specify the directory where the mscgen tool resides. If left empty the tool is assumed to 
-# be found in the default search path.
+# command. Doxygen will then run the mscgen tool (see 
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the 
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where 
+# the mscgen tool resides. If left empty the tool is assumed to be found in the 
+# default search path.
 
 MSCGEN_PATH            = 
 
@@ -1154,7 +1340,7 @@
 # inheritance and usage relations if the target is undocumented 
 # or is not a class.
 
-HIDE_UNDOC_RELATIONS   = NO
+HIDE_UNDOC_RELATIONS   = YES
 
 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
 # available from the path. This tool is part of Graphviz, a graph visualization 
@@ -1163,6 +1349,29 @@
 
 HAVE_DOT               = NO
 
+# By default doxygen will write a font called FreeSans.ttf to the output 
+# directory and reference it in all dot files that doxygen generates. This 
+# font does not include all possible unicode characters however, so when you need 
+# these (or just want a differently looking font) you can specify the font name 
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font, 
+# which can be done by putting it in a standard location or by setting the 
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory 
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. 
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the 
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a 
+# different font using DOT_FONTNAME you can set the path where dot 
+# can find it using this tag.
+
+DOT_FONTPATH           = 
+
 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
 # will generate a graph for each documented class showing the direct and 
 # indirect inheritance relations. Setting this tag to YES will force the 
@@ -1207,19 +1416,19 @@
 
 INCLUDED_BY_GRAPH      = YES
 
-# If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will 
-# generate a call dependency graph for every global function or class method. 
-# Note that enabling this option will significantly increase the time of a run. 
-# So in most cases it will be better to enable call graphs for selected 
-# functions only using the \callgraph command.
-
-CALL_GRAPH             = YES
-
-# If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will 
-# generate a caller dependency graph for every global function or class method. 
-# Note that enabling this option will significantly increase the time of a run. 
-# So in most cases it will be better to enable caller graphs for selected 
-# functions only using the \callergraph command.
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then 
+# doxygen will generate a call dependency graph for every global function 
+# or class method. Note that enabling this option will significantly increase 
+# the time of a run. So in most cases it will be better to enable call graphs 
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then 
+# doxygen will generate a caller dependency graph for every global function 
+# or class method. Note that enabling this option will significantly increase 
+# the time of a run. So in most cases it will be better to enable caller 
+# graphs for selected functions only using the \callergraph command.
 
 CALLER_GRAPH           = NO
 
@@ -1230,13 +1439,13 @@
 
 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
 # then doxygen will show the dependencies a directory has on other directories 
-# in a graphical way. The dependency relations are determined by the #include
+# in a graphical way. The dependency relations are determined by the #include 
 # relations between the files in the directories.
 
 DIRECTORY_GRAPH        = YES
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
-# generated by dot. Possible values are png, jpg, or gif
+# generated by dot. Possible values are png, jpg, or gif 
 # If left blank png will be used.
 
 DOT_IMAGE_FORMAT       = png
@@ -1252,12 +1461,12 @@
 
 DOTFILE_DIRS           = 
 
-# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 
 # nodes that will be shown in the graph. If the number of nodes in a graph 
 # becomes larger than this value, doxygen will truncate the graph, which is 
-# visualized by representing a node as a red box. Note that doxygen if the number 
-# of direct children of the root node in a graph is already larger than 
-# MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note 
+# visualized by representing a node as a red box. Note that doxygen if the 
+# number of direct children of the root node in a graph is already larger than 
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note 
 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
 
 DOT_GRAPH_MAX_NODES    = 50
@@ -1270,13 +1479,13 @@
 # code bases. Also note that the size of a graph can be further restricted by 
 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
 
-MAX_DOT_GRAPH_DEPTH    = 0
+MAX_DOT_GRAPH_DEPTH    = 1000
 
 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
-# background. This is disabled by default, which results in a white background. 
-# Warning: Depending on the platform used, enabling this option may lead to 
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to 
-# read).
+# background. This is disabled by default, because dot on Windows does not 
+# seem to support this out of the box. Warning: Depending on the platform used, 
+# enabling this option may lead to badly anti-aliased labels on the edges of 
+# a graph (i.e. they become hard to read).
 
 DOT_TRANSPARENT        = NO
 
@@ -1300,10 +1509,10 @@
 DOT_CLEANUP            = YES
 
 #---------------------------------------------------------------------------
-# Configuration::additions related to the search engine   
+# Options related to the search engine
 #---------------------------------------------------------------------------
 
 # The SEARCHENGINE tag specifies whether or not a search engine should be 
 # used. If set to NO the values of all tags below this one will be ignored.
 
-SEARCHENGINE           = NO
+SEARCHENGINE           = YES

Modified: branches/arty-newcc/Makefile
URL: http://svn.reactos.org/svn/reactos/branches/arty-newcc/Makefile?rev=39799&r1=39798&r2=39799&view=diff
==============================================================================
--- branches/arty-newcc/Makefile [iso-8859-1] (original)
+++ branches/arty-newcc/Makefile [iso-8859-1] Sat Feb 28 09:23:01 2009
@@ -117,6 +117,8 @@
 #            -v           Be verbose.
 #            -c           Clean as you go. Delete generated files as soon as they are not needed anymore.
 #            -dd          Disable automatic dependencies.
+#            -da          Enable automatic dependencies.
+#            -df          Enable full dependencies.
 #            -dm{module}  Check only automatic dependencies for this module.
 #            -hd          Disable precompiled headers.
 #            -mi          Let make handle creation of install directories. Rbuild will not generate the directories.
@@ -214,16 +216,22 @@
   ECHO_BUILDNO =@echo $(QUOTE)[BUILDNO]  $@$(QUOTE)
   ECHO_INVOKE  =@echo $(QUOTE)[INVOKE]   $<$(QUOTE)
   ECHO_PCH     =@echo $(QUOTE)[PCH]      $@$(QUOTE)
+  ECHO_CPP     =@echo $(QUOTE)[CPP]      $@$(QUOTE)
   ECHO_CC      =@echo $(QUOTE)[CC]       $<$(QUOTE)
+  ECHO_HOSTCC  =@echo $(QUOTE)[HOST-CC]  $<$(QUOTE)
+  ECHO_CL      =@echo $(QUOTE)[CL]       $<$(QUOTE)
   ECHO_GAS     =@echo $(QUOTE)[GAS]      $<$(QUOTE)
   ECHO_NASM    =@echo $(QUOTE)[NASM]     $<$(QUOTE)
   ECHO_AR      =@echo $(QUOTE)[AR]       $@$(QUOTE)
+  ECHO_HOSTAR  =@echo $(QUOTE)[HOST-AR]  $@$(QUOTE)
   ECHO_WINEBLD =@echo $(QUOTE)[WINEBLD]  $@$(QUOTE)
   ECHO_WRC     =@echo $(QUOTE)[WRC]      $@$(QUOTE)
   ECHO_WIDL    =@echo $(QUOTE)[WIDL]     $@$(QUOTE)
   ECHO_BIN2RES =@echo $(QUOTE)[BIN2RES]  $<$(QUOTE)
   ECHO_DLLTOOL =@echo $(QUOTE)[DLLTOOL]  $@$(QUOTE)
   ECHO_LD      =@echo $(QUOTE)[LD]       $@$(QUOTE)
+  ECHO_HOSTLD  =@echo $(QUOTE)[HOST-LD]  $@$(QUOTE)
+  ECHO_LINK    =@echo $(QUOTE)[LINK]     $@$(QUOTE)
   ECHO_NM      =@echo $(QUOTE)[NM]       $@$(QUOTE)
   ECHO_OBJDUMP =@echo $(QUOTE)[OBJDUMP]  $@$(QUOTE)
   ECHO_RBUILD  =@echo $(QUOTE)[RBUILD]   $@$(QUOTE)
@@ -238,22 +246,27 @@
   ECHO_GENDIB  =@echo $(QUOTE)[GENDIB]   $@$(QUOTE)
   ECHO_STRIP   =@echo $(QUOTE)[STRIP]    $@$(QUOTE)
   ECHO_RGENSTAT=@echo $(QUOTE)[RGENSTAT] $@$(QUOTE)
+  ECHO_DEPENDS =@echo $(QUOTE)[DEPENDS]  $<$(QUOTE)
 else
   ECHO_CP      =
   ECHO_MKDIR   =
   ECHO_BUILDNO =
   ECHO_INVOKE  =
   ECHO_PCH     =
+  ECHO_CPP     =
   ECHO_CC      =
+  ECHO_HOSTCC  =
   ECHO_GAS     =
   ECHO_NASM    =
   ECHO_AR      =
+  ECHO_HOSTAR  =
   ECHO_WINEBLD =
   ECHO_WRC     =
   ECHO_WIDL    =
   ECHO_BIN2RES =
   ECHO_DLLTOOL =
   ECHO_LD      =
+  ECHO_HOSTLD  =
   ECHO_NM      =
   ECHO_OBJDUMP =
   ECHO_RBUILD  =
@@ -268,6 +281,7 @@
   ECHO_GENDIB  =
   ECHO_STRIP   =
   ECHO_RGENSTAT=
+  ECHO_DEPENDS =
 endif
 
 # Set host compiler/linker
@@ -309,6 +323,8 @@
 dlltool = $(Q)$(PREFIX_)dlltool
 strip = $(Q)$(PREFIX_)strip
 windres = $(Q)$(PREFIX_)windres
+cl = $(Q)cl -nologo
+link = $(Q)link -nologo
 
 # Set utilities
 ifeq ($(OSTYPE),msys)

Modified: branches/arty-newcc/ReactOS-arm.rbuild
URL: http://svn.reactos.org/svn/reactos/branches/arty-newcc/ReactOS-arm.rbuild?rev=39799&r1=39798&r2=39799&view=diff
==============================================================================
--- branches/arty-newcc/ReactOS-arm.rbuild [iso-8859-1] (original)
+++ branches/arty-newcc/ReactOS-arm.rbuild [iso-8859-1] Sat Feb 28 09:23:01 2009
@@ -12,6 +12,7 @@
 	<define name="__REACTOS__" />
 	<define name="_ARM_" />
 	<define name="__arm__" />
+	<define name="TARGET_arm" host="true" />
 
 	<if property="DBG" value="1">
 		<define name="DBG">1</define>

Modified: branches/arty-newcc/ReactOS-generic.rbuild
URL: http://svn.reactos.org/svn/reactos/branches/arty-newcc/ReactOS-generic.rbuild?rev=39799&r1=39798&r2=39799&view=diff
==============================================================================
--- branches/arty-newcc/ReactOS-generic.rbuild [iso-8859-1] (original)
+++ branches/arty-newcc/ReactOS-generic.rbuild [iso-8859-1] Sat Feb 28 09:23:01 2009
@@ -4,6 +4,8 @@
 	<xi:include href="baseaddress.rbuild" />
 
 	<define name="__REACTOS__" />
+	<define name="__REACTOS__" host="true" />
+
 	<if property="DBG" value="1">
 		<define name="DBG">1</define>
 		<define name="_SEH_ENABLE_TRACE" />
@@ -12,6 +14,49 @@
 	<if property="KDBG" value="1">
 		<define name="KDBG">1</define>
 		<property name="DBG_OR_KDBG" value="true" />
+	</if>
+
+	<!-- The version target valid values are: Nt4 , NT5 , NT51 -->
+	<property name="VERSION_TARGET" value="NT52" />
+
+	<if property="VERSION_TARGET" value="NT4">
+		<define name="WINVER" overridable="true">0x400</define>
+		<define name="_WIN32_IE">0x600</define>
+		<define name="_WIN32_WINNT" overridable="true">0x400</define>
+		<define name="_WIN32_WINDOWS">0x400</define>
+		<define name="_SETUPAPI_VER">0x400</define>
+	</if>
+
+	<if property="VERSION_TARGET" value="NT5">
+		<define name="WINVER" overridable="true">0x500</define>
+		<define name="_WIN32_IE">0x600</define>
+		<define name="_WIN32_WINNT" overridable="true">0x500</define>
+		<define name="_WIN32_WINDOWS">0x500</define>
+		<define name="_SETUPAPI_VER">0x500</define>
+	</if>
+
+	<if property="VERSION_TARGET" value="NT51">
+		<define name="WINVER" overridable="true">0x501</define>
+		<define name="_WIN32_IE">0x600</define>
+		<define name="_WIN32_WINNT" overridable="true">0x501</define>
+		<define name="_WIN32_WINDOWS">0x501</define>
+		<define name="_SETUPAPI_VER">0x501</define>
+	</if>
+
+	<if property="VERSION_TARGET" value="NT52">
+		<define name="WINVER" overridable="true">0x502</define>
+		<define name="_WIN32_IE">0x600</define>
+		<define name="_WIN32_WINNT" overridable="true">0x502</define>
+		<define name="_WIN32_WINDOWS">0x502</define>
+		<define name="_SETUPAPI_VER">0x502</define>
+	</if>
+
+	<if property="VERSION_TARGET" value="NT6">
+		<define name="WINVER" overridable="true">0x600</define>
+		<define name="_WIN32_IE">0x600</define>
+		<define name="_WIN32_WINNT" overridable="true">0x600</define>
+		<define name="_WIN32_WINDOWS">0x600</define>
+		<define name="_SETUPAPI_VER">0x600</define>
 	</if>
 
 	<include>.</include>
@@ -30,6 +75,11 @@
 	<include root="intermediate">include/reactos</include>
 	<include root="intermediate">include/reactos/mc</include>
 	<include>include/reactos/libs</include>
+
+	<include host="true">include</include>
+	<include host="true" root="intermediate">include</include>
+	<include host="true">include/reactos</include>
+	<include host="true">include/reactos/wine</include>
 
 	<directory name="base">
 		<xi:include href="base/base.rbuild" />
@@ -60,7 +110,9 @@
 	</directory>
 	<directory name="ntoskrnl">
 		<xi:include href="ntoskrnl/ntoskrnl.rbuild" />
-		<!-- <xi:include href="ntoskrnl/ntkrnlmp.rbuild" /> -->
+		<if property="BUILD_MP" value="1">
+			<xi:include href="ntoskrnl/ntkrnlmp.rbuild" />
+		</if>
 	</directory>
 	<directory name="subsystems">
 		<xi:include href="subsystems/subsystems.rbuild" />
@@ -69,4 +121,5 @@
 		<xi:include href="tools/tools.rbuild" />
 	</directory>
 
+	<compilerflag compiler="cpp">-Wno-non-virtual-dtor</compilerflag>
 </group>

Modified: branches/arty-newcc/ReactOS-i386.rbuild
URL: http://svn.reactos.org/svn/reactos/branches/arty-newcc/ReactOS-i386.rbuild?rev=39799&r1=39798&r2=39799&view=diff
==============================================================================
--- branches/arty-newcc/ReactOS-i386.rbuild [iso-8859-1] (original)
+++ branches/arty-newcc/ReactOS-i386.rbuild [iso-8859-1] Sat Feb 28 09:23:01 2009
@@ -12,8 +12,12 @@
 	<define name="_M_IX86" />
 	<define name="_X86_" />
 	<define name="__i386__" />
+	<define name="TARGET_i386" host="true" />
+
+	<define name="USE_COMPILER_EXCEPTIONS" />
 
 	<property name="NTOSKRNL_SHARED" value="-file-alignment=0x1000 -section-alignment=0x1000 -shared"/>
+	<property name="PLATFORM" value="PC"/>
 
 	<if property="OPTIMIZE" value="1">
 		<compilerflag>-Os</compilerflag>
@@ -37,6 +41,8 @@
 	<compilerflag>-fno-strict-aliasing</compilerflag>
 	<compilerflag>-Wno-strict-aliasing</compilerflag>
 	<compilerflag>-Wpointer-arith</compilerflag>
+	<compilerflag>-Wno-multichar</compilerflag>
+	<!-- compilerflag>-H</compilerflag>    enable this for header traces -->
 	<linkerflag>-disable-stdcall-fixup</linkerflag>
 
 </project>

Modified: branches/arty-newcc/baseaddress.rbuild
URL: http://svn.reactos.org/svn/reactos/branches/arty-newcc/baseaddress.rbuild?rev=39799&r1=39798&r2=39799&view=diff
==============================================================================
--- branches/arty-newcc/baseaddress.rbuild [iso-8859-1] (original)
+++ branches/arty-newcc/baseaddress.rbuild [iso-8859-1] Sat Feb 28 09:23:01 2009
@@ -3,16 +3,26 @@
 <group xmlns:xi="http://www.w3.org/2001/XInclude">
   <property name="BASEADDRESS_REGTESTS" value="0x07000000" />
   <property name="BASEADDRESS_NOTIFYHOOK" value="0x08000000" />
+  <property name="BASEADDRESS_QMGRPRXY" value="0x1F710000" />
+  <property name="BASEADDRESS_CRYPTDLG" value="0x209C0000" />
   <property name="BASEADDRESS_COMCAT" value="0x20A50000" />
   <property name="BASEADDRESS_DEVENUM" value="0x35680000" />
   <property name="BASEADDRESS_RSABASE" value="0x35700000" />
   <property name="BASEADDRESS_RSAENH" value="0x35780000" />
+  <property name="BASEADDRESS_URL" value="0x42ea0000" />
+  <property name="BASEADDRESS_DWMAPI" value="0x4A3F0000" />
+  <property name="BASEADDRESS_LOADPERF" value="0x4B920000" />
+  <property name="BASEADDRESS_MPRAPI" value="0x4C400000" />
+  <property name="BASEADDRESS_MSFTEDIT" value="0x4b460000" />
+  <property name="BASEADDRESS_WUAPI" value="0x506a0000" />
+  <property name="BASEADDRESS_SRCLIENT" value="0x512C0000" />
   <property name="BASEADDRESS_PSTOREC" value="0x513D0000" />
   <property name="BASEADDRESS_LPK" value="0x516C0000" />
   <property name="BASEADDRESS_TELEPHON" value="0x58750000" />
   <property name="BASEADDRESS_PWRCFG" value="0x587e0000" />
   <property name="BASEADDRESS_MMSYS" value="0x588a0000" />
   <property name="BASEADDRESS_JOY" value="0x589b0000" />
+  <property name="BASEADDRESS_QMGR" value="0x59620000" />
   <property name="BASEADDRESS_UXTHEME" value="0x5ad70000" />
   <property name="BASEADDRESS_VDMDBG" value="0x5b0d0000" />
   <property name="BASEADDRESS_UNTFS" value="0x5b340000" />
@@ -28,9 +38,12 @@
   <property name="BASEADDRESS_INPUT" value ="0x5e400000" />
   <property name="BASEADDRESS_DINPUT" value="0x5f580000" />
   <property name="BASEADDRESS_NETID" value="0x5f660000" />
+  <property name="BASEADDRESS_NTPRINT" value="0x5f6a0000" />
+  <property name="BASEADDRESS_INSENG" value="0x61000000" />
   <property name="BASEADDRESS_QEDIT" value="0x611c0000" />
   <property name="BASEADDRESS_MODEMUI" value="0x61650000" />
   <property name="BASEADDRESS_MAPI32" value="0x62250000" />
+  <property name="BASEADDRESS_LOCALUI" value="0x62f70000" />
   <property name="BASEADDRESS_HDWWIZ" value="0x64d40000" />
   <property name="BASEADDRESS_TIMEDATE" value="0x64da0000" />
   <property name="BASEADDRESS_SYSDM" value="0x64dd0000" />
@@ -42,6 +55,7 @@
   <property name="BASEADDRESS_APPWIZ" value="0x65100000" />
   <property name="BASEADDRESS_MLANG" value="0x65140000" />
   <property name="BASEADDRESS_ACCESS" value="0x65180000" />
+  <property name="BASEADDRESS_ITSS" value="0x66370000" />
   <property name="BASEADDRESS_INETMIB1" value="0x666f0000" />
   <property name="BASEADDRESS_WSHTCPIP" value="0x677b0000" />
   <property name="BASEADDRESS_CRYPT32" value="0x67ab0000" />
@@ -49,6 +63,7 @@
   <property name="BASEADDRESS_PSXDLL" value="0x68eb0000" />
   <property name="BASEADDRESS_PSAPI" value="0x68f70000" />
   <property name="BASEADDRESS_KSPROXY" value="0x68f90000" />
+  <property name="BASEADDRESS_GETUNAME" value="0x69110000" />
   <property name="BASEADDRESS_OLEACC" value="0x69640000" />
   <property name="BASEADDRESS_WINMM" value="0x697d0000" />
   <property name="BASEADDRESS_MSIMG32" value="0x69cc0000" />
@@ -78,6 +93,7 @@
   <property name="BASEADDRESS_SCHANNEL" value="0x6e360000" />
   <property name="BASEADDRESS_COMPSTUI" value="0x6ec10000" />
   <property name="BASEADDRESS_CLB" value="0x6f2b0000" />
+  <property name="BASEADDRESS_JSCRIPT" value="0x6fe80000" />
   <property name="BASEADDRESS_FONTEXT" value="0x6f7b0000" />
   <property name="BASEADDRESS_CARDS" value="0x701a0000" />
   <property name="BASEADDRESS_WININET" value="0x70200000" />
@@ -85,10 +101,14 @@
   <property name="BASEADDRESS_ACLUI" value="0x71550000" />
   <property name="BASEADDRESS_DHCPCSVC" value="0x71650000" />
   <property name="BASEADDRESS_SHDOCVW" value="0x71700000" />
+  <property name="BASEADDRESS_ACTXPRXY" value="0x71800000" />
   <property name="BASEADDRESS_MSWSOCK" value="0x71a30000" />
   <property name="BASEADDRESS_WSOCK32" value="0x71ab0000" />
   <property name="BASEADDRESS_ACLEDIT" value="0x71b70000" />
   <property name="BASEADDRESS_NETAPI32" value="0x71c00000" />
+  <property name="BASEADDRESS_OLESVR32" value="0x71dd0000" />
+  <property name="BASEADDRESS_OLECLI32" value="0x71df0000" />
+  <property name="BASEADDRESS_OLETHK32" value="0x71e10000" />
   <property name="BASEADDRESS_DPLAY" value="0x71e80000" />
   <property name="BASEADDRESS_SECURITY" value="0x71f10000" />
   <property name="BASEADDRESS_CRYPTUI" value="0x720D0000" />
@@ -97,14 +117,21 @@
   <property name="BASEADDRESS_DEVMGR" value="0x72a90000" />
   <property name="BASEADDRESS_WDMAUD" value="0x72d20000" />
   <property name="BASEADDRESS_WINSPOOL" value="0x72f50000" />
+  <property name="BASEADDRESS_MSCAT32" value="0x732b0000" />
   <property name="BASEADDRESS_MSTASK" value="0x73520000" />
+  <property name="BASEADDRESS_MSRLE32" value="0x73660000" />
   <property name="BASEADDRESS_MSDMO" value="0x73670000" />
   <property name="BASEADDRESS_AVIFIL32" value="0x73ac0000" />
+  <property name="BASEADDRESS_MSCMS" value="0x73af0000" />
   <property name="BASEADDRESS_DCIMAN32" value="0x73b10000" />
+  <property name="BASEADDRESS_STI" value="0x73b60000" />
   <property name="BASEADDRESS_LZ32" value="0x73d80000" />
   <property name="BASEADDRESS_COREDLL" value="0x73d80000" />
   <property name="BASEADDRESS_KSUSER" value="0x73ea0000" />
   <property name="BASEADDRESS_ICMP" value="0x741f0000" />
+  <property name="BASEADDRESS_SPOOLSS" value="0x742a0000" />
+  <property name="BASEADDRESS_MSIMTF" value="0x746b0000" />
+  <property name="BASEADDRESS_MSCTF" value="0x746e0000" />
   <property name="BASEADDRESS_QUARTZ" value="0x747d0000" />
   <property name="BASEADDRESS_USERENV" value="0x74850000" />
   <property name="BASEADDRESS_WS2_32" value="0x74aa0000" />
@@ -122,6 +149,7 @@
   <property name="BASEADDRESS_IPHLPAPI" value="0x75700000" />
   <property name="BASEADDRESS_NDDEAPI" value="0x75940000" />
   <property name="BASEADDRESS_MSGINA" value="0x75970000" />
+  <property name="BASEADDRESS_LOCALSPL" value="0x75b80000" />
   <property name="BASEADDRESS_CRYPTNET" value="0x75e60000" />
   <property name="BASEADDRESS_RPCRT4" value="0x76000000" />
   <property name="BASEADDRESS_SHLWAPI" value="0x76120000" />
@@ -151,10 +179,12 @@
   <property name="BASEADDRESS_GDIPLUS" value="0x76a00000" />
   <property name="BASEADDRESS_ATL" value="0x76a80000" />
   <property name="BASEADDRESS_SFC" value="0x76b50000" />
+  <property name="BASEADDRESS_CREDUI" value="0x76bf0000" />
   <property name="BASEADDRESS_SFC_OS" value="0x76c10000" />
   <property name="BASEADDRESS_WINTRUST" value="0x76c30000" />
   <property name="BASEADDRESS_IMAGEHLP" value="0x76c90000" />
   <property name="BASEADDRESS_CLUSAPI" value="0x76d10000" />
+  <property name="BASEADDRESS_WMI" value="0x76d20000" />
   <property name="BASEADDRESS_DHCPCSVC" value="0x76d80000" />
   <property name="BASEADDRESS_FMIFS" value="0x76df0000" />
   <property name="BASEADDRESS_OLEAUT32" value="0x76e00000" />
@@ -179,6 +209,7 @@
   <property name="BASEADDRESS_VERSION" value="0x77a40000" />
   <property name="BASEADDRESS_OLE32" value="0x77a50000" />
   <property name="BASEADDRESS_OLEPRO32" value="0x77b10000" />
+  <property name="BASEADDRESS_ACTIVEDS" value="0x77cb0000" />
   <property name="BASEADDRESS_ADVAPI32" value="0x77dc0000" />
   <property name="BASEADDRESS_USER32" value="0x77e30000" />
   <property name="BASEADDRESS_GDI32" value="0x77f70000" />
@@ -187,7 +218,8 @@
   <property name="BASEADDRESS_MSVCRT20" value="0x78500000" />
   <property name="BASEADDRESS_MSVCRT40" value="0x78700000" />
   <property name="BASEADDRESS_MSCOREE" value="0x79000000" />
-  <property name="BASEADDRESS_KERNEL32" value="0x7c800000" />
+  <property name="BASEADDRESS_FUSION" value="0x79040000" />
+  <property name="BASEADDRESS_KERNEL32" value="0x7c700000" />
   <property name="BASEADDRESS_NTDLL" value="0x7c900000" />
   <property name="BASEADDRESS_HHCTRL" value="0x7e410000" />
   <property name="BASEADDRESS_SXS" value="0x7e690000" />

Modified: branches/arty-newcc/config-arm.template.rbuild
URL: http://svn.reactos.org/svn/reactos/branches/arty-newcc/config-arm.template.rbuild?rev=39799&r1=39798&r2=39799&view=diff
==============================================================================
--- branches/arty-newcc/config-arm.template.rbuild [iso-8859-1] (original)
+++ branches/arty-newcc/config-arm.template.rbuild [iso-8859-1] Sat Feb 28 09:23:01 2009
@@ -22,12 +22,18 @@
 
 
 <!--
-	Which CPU ReactOS should be optimized for. Specify one of:
+	Generate instructions for this CPU type. Specify one of:
 		armv5te
 
-	See GCC manual for more CPU names and which CPUs GCC can optimize for.
+	See GCC manual for more CPU names.
 -->
 <property name="OARCH" value="armv5te" />
+
+
+<!--
+	Which CPU ReactOS should be optimized for. See GCC manual for CPU names.
+-->
+<property name="TUNE" value="" />
 
 
 <!--

Modified: branches/arty-newcc/config-ppc.template.rbuild
URL: http://svn.reactos.org/svn/reactos/branches/arty-newcc/config-ppc.template.rbuild?rev=39799&r1=39798&r2=39799&view=diff
==============================================================================
--- branches/arty-newcc/config-ppc.template.rbuild [iso-8859-1] (original)
+++ branches/arty-newcc/config-ppc.template.rbuild [iso-8859-1] Sat Feb 28 09:23:01 2009
@@ -15,19 +15,23 @@
 
 <!--
 	Sub-architecture to build for. Specify one of:
-		xbox
+		??
 -->
 <property name="SARCH" value="" />
 
 
 <!--
-	Which CPU ReactOS should be optimized for. Specify one of:
-		i486, i586, pentium, pentium2, pentium3, pentium4, athlon-xp, athlon-mp,
-		k6-2
+	Generate instructions for this CPU type. Specify one of:
+		??
 
-	See GCC manual for more CPU names and which CPUs GCC can optimize for.
+	See GCC manual for more CPU names.
 -->
 <property name="OARCH" value="" />
+
+<!--
+	Which CPU ReactOS should be optimized for. See GCC manual for CPU names.
+-->
+<property name="TUNE" value="" />
 
 
 <!--

Modified: branches/arty-newcc/config.template.rbuild
URL: http://svn.reactos.org/svn/reactos/branches/arty-newcc/config.template.rbuild?rev=39799&r1=39798&r2=39799&view=diff
==============================================================================
--- branches/arty-newcc/config.template.rbuild [iso-8859-1] (original)
+++ branches/arty-newcc/config.template.rbuild [iso-8859-1] Sat Feb 28 09:23:01 2009
@@ -21,13 +21,23 @@
 
 
 <!--
-	Which CPU ReactOS should be optimized for. Specify one of:
-		i486, i586, pentium, pentium2, pentium3, pentium4, athlon-xp, athlon-mp,
-		k6-2
+	Generate instructions for this CPU type. Specify one of:
+		native, i386, i486, pentium, pentium-mmx, pentiumpro, i686,
+		pentium2, pentium3, pentium-m, pentium4, prescott, nocona,
+		core2, k6, k6-2, athlon, athlon-xp, opteron, opteron-sse3,
+		barcelona, winchip-c6, winchip2, c3, c3-2, geode
 
-	See GCC manual for more CPU names and which CPUs GCC can optimize for.
+	See GCC manual for more CPU names.
 -->
 <property name="OARCH" value="pentium" />
+
+
+<!--
+	Which CPU ReactOS should be optimized for. Specify one of the above
+	CPUs or generic. When this option is not used, GCC will optimize for
+	the processor specified by OARCH.
+-->
+<property name="TUNE" value="i686" />
 
 
 <!--
@@ -85,4 +95,9 @@
 -->
 <property name="_ELF_" value="0" />
 
+<!--
+	Whether to compile the multi processor versions for ntoskrnl and hal.
+-->
+<property name="BUILD_MP" value="1" />
+
 </group>



More information about the Ros-diffs mailing list