[ros-diffs] [jgardou] 53130: [I8042PRT] - fix formatting
jgardou at svn.reactos.org
jgardou at svn.reactos.org
Sun Aug 7 22:45:18 UTC 2011
Author: jgardou
Date: Sun Aug 7 22:45:17 2011
New Revision: 53130
URL: http://svn.reactos.org/svn/reactos?rev=53130&view=rev
Log:
[I8042PRT]
- fix formatting
Modified:
trunk/reactos/drivers/input/i8042prt/pnp.c
Modified: trunk/reactos/drivers/input/i8042prt/pnp.c
URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/input/i8042prt/pnp.c?rev=53130&r1=53129&r2=53130&view=diff
==============================================================================
--- trunk/reactos/drivers/input/i8042prt/pnp.c [iso-8859-1] (original)
+++ trunk/reactos/drivers/input/i8042prt/pnp.c [iso-8859-1] Sun Aug 7 22:45:17 2011
@@ -33,687 +33,687 @@
*/
BOOLEAN
i8042ChangeMode(
- IN PPORT_DEVICE_EXTENSION DeviceExtension,
- IN UCHAR FlagsToDisable,
- IN UCHAR FlagsToEnable)
-{
- UCHAR Value;
- NTSTATUS Status;
-
- if (!i8042Write(DeviceExtension, DeviceExtension->ControlPort, KBD_READ_MODE))
- {
- WARN_(I8042PRT, "Can't read i8042 mode\n");
- return FALSE;
- }
-
- Status = i8042ReadDataWait(DeviceExtension, &Value);
- if (!NT_SUCCESS(Status))
- {
- WARN_(I8042PRT, "No response after read i8042 mode\n");
- return FALSE;
- }
-
- Value &= ~FlagsToDisable;
- Value |= FlagsToEnable;
-
- if (!i8042Write(DeviceExtension, DeviceExtension->ControlPort, KBD_WRITE_MODE))
- {
- WARN_(I8042PRT, "Can't set i8042 mode\n");
- return FALSE;
- }
-
- if (!i8042Write(DeviceExtension, DeviceExtension->DataPort, Value))
- {
- WARN_(I8042PRT, "Can't send i8042 mode\n");
- return FALSE;
- }
-
- return TRUE;
+ IN PPORT_DEVICE_EXTENSION DeviceExtension,
+ IN UCHAR FlagsToDisable,
+ IN UCHAR FlagsToEnable)
+{
+ UCHAR Value;
+ NTSTATUS Status;
+
+ if (!i8042Write(DeviceExtension, DeviceExtension->ControlPort, KBD_READ_MODE))
+ {
+ WARN_(I8042PRT, "Can't read i8042 mode\n");
+ return FALSE;
+ }
+
+ Status = i8042ReadDataWait(DeviceExtension, &Value);
+ if (!NT_SUCCESS(Status))
+ {
+ WARN_(I8042PRT, "No response after read i8042 mode\n");
+ return FALSE;
+ }
+
+ Value &= ~FlagsToDisable;
+ Value |= FlagsToEnable;
+
+ if (!i8042Write(DeviceExtension, DeviceExtension->ControlPort, KBD_WRITE_MODE))
+ {
+ WARN_(I8042PRT, "Can't set i8042 mode\n");
+ return FALSE;
+ }
+
+ if (!i8042Write(DeviceExtension, DeviceExtension->DataPort, Value))
+ {
+ WARN_(I8042PRT, "Can't send i8042 mode\n");
+ return FALSE;
+ }
+
+ return TRUE;
}
static NTSTATUS
i8042BasicDetect(
- IN PPORT_DEVICE_EXTENSION DeviceExtension)
-{
- NTSTATUS Status;
- ULONG ResendIterations;
- UCHAR Value = 0;
-
- /* Don't enable keyboard and mouse interrupts, disable keyboard/mouse */
- i8042Flush(DeviceExtension);
- if (!i8042ChangeMode(DeviceExtension, CCB_KBD_INT_ENAB | CCB_MOUSE_INT_ENAB, CCB_KBD_DISAB | CCB_MOUSE_DISAB))
- return STATUS_IO_DEVICE_ERROR;
-
- i8042Flush(DeviceExtension);
-
- /* Issue a CTRL_SELF_TEST command to check if this is really an i8042 controller */
- ResendIterations = DeviceExtension->Settings.ResendIterations + 1;
- while (ResendIterations--)
- {
- if (!i8042Write(DeviceExtension, DeviceExtension->ControlPort, CTRL_SELF_TEST))
- {
- WARN_(I8042PRT, "Writing CTRL_SELF_TEST command failed\n");
- return STATUS_IO_TIMEOUT;
- }
-
- Status = i8042ReadDataWait(DeviceExtension, &Value);
- if (!NT_SUCCESS(Status))
- {
- WARN_(I8042PRT, "Failed to read CTRL_SELF_TEST response, status 0x%08lx\n", Status);
- return Status;
- }
-
- if (Value == KBD_SELF_TEST_OK)
- {
- INFO_(I8042PRT, "CTRL_SELF_TEST completed successfully!\n");
- break;
- }
- else if (Value == KBD_RESEND)
- {
- TRACE_(I8042PRT, "Resending...\n", Value);
- KeStallExecutionProcessor(50);
- }
- else
- {
- WARN_(I8042PRT, "Got 0x%02x instead of 0x55\n", Value);
- return STATUS_IO_DEVICE_ERROR;
- }
- }
-
- return STATUS_SUCCESS;
+ IN PPORT_DEVICE_EXTENSION DeviceExtension)
+{
+ NTSTATUS Status;
+ ULONG ResendIterations;
+ UCHAR Value = 0;
+
+ /* Don't enable keyboard and mouse interrupts, disable keyboard/mouse */
+ i8042Flush(DeviceExtension);
+ if (!i8042ChangeMode(DeviceExtension, CCB_KBD_INT_ENAB | CCB_MOUSE_INT_ENAB, CCB_KBD_DISAB | CCB_MOUSE_DISAB))
+ return STATUS_IO_DEVICE_ERROR;
+
+ i8042Flush(DeviceExtension);
+
+ /* Issue a CTRL_SELF_TEST command to check if this is really an i8042 controller */
+ ResendIterations = DeviceExtension->Settings.ResendIterations + 1;
+ while (ResendIterations--)
+ {
+ if (!i8042Write(DeviceExtension, DeviceExtension->ControlPort, CTRL_SELF_TEST))
+ {
+ WARN_(I8042PRT, "Writing CTRL_SELF_TEST command failed\n");
+ return STATUS_IO_TIMEOUT;
+ }
+
+ Status = i8042ReadDataWait(DeviceExtension, &Value);
+ if (!NT_SUCCESS(Status))
+ {
+ WARN_(I8042PRT, "Failed to read CTRL_SELF_TEST response, status 0x%08lx\n", Status);
+ return Status;
+ }
+
+ if (Value == KBD_SELF_TEST_OK)
+ {
+ INFO_(I8042PRT, "CTRL_SELF_TEST completed successfully!\n");
+ break;
+ }
+ else if (Value == KBD_RESEND)
+ {
+ TRACE_(I8042PRT, "Resending...\n", Value);
+ KeStallExecutionProcessor(50);
+ }
+ else
+ {
+ WARN_(I8042PRT, "Got 0x%02x instead of 0x55\n", Value);
+ return STATUS_IO_DEVICE_ERROR;
+ }
+ }
+
+ return STATUS_SUCCESS;
}
static VOID
i8042DetectKeyboard(
- IN PPORT_DEVICE_EXTENSION DeviceExtension)
-{
- NTSTATUS Status;
-
- /* Set LEDs (that is not fatal if some error occurs) */
- Status = i8042SynchWritePort(DeviceExtension, 0, KBD_CMD_SET_LEDS, TRUE);
- if (NT_SUCCESS(Status))
- {
- Status = i8042SynchWritePort(DeviceExtension, 0, 0, TRUE);
- if (!NT_SUCCESS(Status))
- {
- WARN_(I8042PRT, "Can't finish SET_LEDS (0x%08lx)\n", Status);
- return;
- }
- }
- else
- {
- WARN_(I8042PRT, "Warning: can't write SET_LEDS (0x%08lx)\n", Status);
- }
-
- /* Turn on translation and SF (Some machines don't reboot if SF is not set, see ReactOS bug #1842) */
- if (!i8042ChangeMode(DeviceExtension, 0, CCB_TRANSLATE | CCB_SYSTEM_FLAG))
- return;
-
- /*
- * We used to send a KBD_LINE_TEST (0xAB) command, but on at least HP
- * Pavilion notebooks the response to that command was incorrect.
- * So now we just assume that a keyboard is attached.
- */
- DeviceExtension->Flags |= KEYBOARD_PRESENT;
-
- INFO_(I8042PRT, "Keyboard detected\n");
+ IN PPORT_DEVICE_EXTENSION DeviceExtension)
+{
+ NTSTATUS Status;
+
+ /* Set LEDs (that is not fatal if some error occurs) */
+ Status = i8042SynchWritePort(DeviceExtension, 0, KBD_CMD_SET_LEDS, TRUE);
+ if (NT_SUCCESS(Status))
+ {
+ Status = i8042SynchWritePort(DeviceExtension, 0, 0, TRUE);
+ if (!NT_SUCCESS(Status))
+ {
+ WARN_(I8042PRT, "Can't finish SET_LEDS (0x%08lx)\n", Status);
+ return;
+ }
+ }
+ else
+ {
+ WARN_(I8042PRT, "Warning: can't write SET_LEDS (0x%08lx)\n", Status);
+ }
+
+ /* Turn on translation and SF (Some machines don't reboot if SF is not set, see ReactOS bug #1842) */
+ if (!i8042ChangeMode(DeviceExtension, 0, CCB_TRANSLATE | CCB_SYSTEM_FLAG))
+ return;
+
+ /*
+ * We used to send a KBD_LINE_TEST (0xAB) command, but on at least HP
+ * Pavilion notebooks the response to that command was incorrect.
+ * So now we just assume that a keyboard is attached.
+ */
+ DeviceExtension->Flags |= KEYBOARD_PRESENT;
+
+ INFO_(I8042PRT, "Keyboard detected\n");
}
static VOID
i8042DetectMouse(
- IN PPORT_DEVICE_EXTENSION DeviceExtension)
-{
- NTSTATUS Status;
- UCHAR Value;
- UCHAR ExpectedReply[] = { MOUSE_ACK, 0xAA };
- UCHAR ReplyByte;
-
- /* First do a mouse line test */
- if (i8042Write(DeviceExtension, DeviceExtension->ControlPort, MOUSE_LINE_TEST))
- {
- Status = i8042ReadDataWait(DeviceExtension, &Value);
-
- if (!NT_SUCCESS(Status) || Value != 0)
- {
- WARN_(I8042PRT, "Mouse line test failed\n");
- goto failure;
- }
- }
-
- /* Now reset the mouse */
- i8042Flush(DeviceExtension);
-
- if(!i8042IsrWritePort(DeviceExtension, MOU_CMD_RESET, CTRL_WRITE_MOUSE))
- {
- WARN_(I8042PRT, "Failed to write reset command to mouse\n");
- goto failure;
- }
-
- /* The implementation of the "Mouse Reset" command differs much from chip to chip.
-
- By default, the first byte is an ACK, when the mouse is plugged in and working and NACK when it's not.
- On success, the next bytes are 0xAA and 0x00.
-
- But on some systems (like ECS K7S5A Pro, SiS 735 chipset), we always get an ACK and 0xAA.
- Only the last byte indicates, whether a mouse is plugged in.
- It is either sent or not, so there is no byte, which indicates a failure here.
-
- After the Mouse Reset command was issued, it usually takes some time until we get a response.
- So get the first two bytes in a loop. */
- for (ReplyByte = 0;
- ReplyByte < sizeof(ExpectedReply) / sizeof(ExpectedReply[0]);
- ReplyByte++)
- {
- ULONG Counter = 500;
-
- do
- {
- Status = i8042ReadDataWait(DeviceExtension, &Value);
-
- if(!NT_SUCCESS(Status))
- {
- /* Wait some time before trying again */
- KeStallExecutionProcessor(50);
- }
- } while (Status == STATUS_IO_TIMEOUT && Counter--);
-
- if (!NT_SUCCESS(Status))
- {
- WARN_(I8042PRT, "No ACK after mouse reset, status 0x%08lx\n", Status);
- goto failure;
- }
- else if (Value != ExpectedReply[ReplyByte])
- {
- WARN_(I8042PRT, "Unexpected reply: 0x%02x (expected 0x%02x)\n", Value, ExpectedReply[ReplyByte]);
- goto failure;
- }
- }
-
- /* Finally get the third byte, but only try it one time (see above).
- Otherwise this takes around 45 seconds on a K7S5A Pro, when no mouse is plugged in. */
- Status = i8042ReadDataWait(DeviceExtension, &Value);
-
- if(!NT_SUCCESS(Status))
- {
- WARN_(I8042PRT, "Last byte was not transmitted after mouse reset, status 0x%08lx\n", Status);
- goto failure;
- }
- else if(Value != 0x00)
- {
- WARN_(I8042PRT, "Last byte after mouse reset was not 0x00, but 0x%02x\n", Value);
- goto failure;
- }
-
- DeviceExtension->Flags |= MOUSE_PRESENT;
- INFO_(I8042PRT, "Mouse detected\n");
- return;
+ IN PPORT_DEVICE_EXTENSION DeviceExtension)
+{
+ NTSTATUS Status;
+ UCHAR Value;
+ UCHAR ExpectedReply[] = { MOUSE_ACK, 0xAA };
+ UCHAR ReplyByte;
+
+ /* First do a mouse line test */
+ if (i8042Write(DeviceExtension, DeviceExtension->ControlPort, MOUSE_LINE_TEST))
+ {
+ Status = i8042ReadDataWait(DeviceExtension, &Value);
+
+ if (!NT_SUCCESS(Status) || Value != 0)
+ {
+ WARN_(I8042PRT, "Mouse line test failed\n");
+ goto failure;
+ }
+ }
+
+ /* Now reset the mouse */
+ i8042Flush(DeviceExtension);
+
+ if(!i8042IsrWritePort(DeviceExtension, MOU_CMD_RESET, CTRL_WRITE_MOUSE))
+ {
+ WARN_(I8042PRT, "Failed to write reset command to mouse\n");
+ goto failure;
+ }
+
+ /* The implementation of the "Mouse Reset" command differs much from chip to chip.
+
+ By default, the first byte is an ACK, when the mouse is plugged in and working and NACK when it's not.
+ On success, the next bytes are 0xAA and 0x00.
+
+ But on some systems (like ECS K7S5A Pro, SiS 735 chipset), we always get an ACK and 0xAA.
+ Only the last byte indicates, whether a mouse is plugged in.
+ It is either sent or not, so there is no byte, which indicates a failure here.
+
+ After the Mouse Reset command was issued, it usually takes some time until we get a response.
+ So get the first two bytes in a loop. */
+ for (ReplyByte = 0;
+ ReplyByte < sizeof(ExpectedReply) / sizeof(ExpectedReply[0]);
+ ReplyByte++)
+ {
+ ULONG Counter = 500;
+
+ do
+ {
+ Status = i8042ReadDataWait(DeviceExtension, &Value);
+
+ if(!NT_SUCCESS(Status))
+ {
+ /* Wait some time before trying again */
+ KeStallExecutionProcessor(50);
+ }
+ } while (Status == STATUS_IO_TIMEOUT && Counter--);
+
+ if (!NT_SUCCESS(Status))
+ {
+ WARN_(I8042PRT, "No ACK after mouse reset, status 0x%08lx\n", Status);
+ goto failure;
+ }
+ else if (Value != ExpectedReply[ReplyByte])
+ {
+ WARN_(I8042PRT, "Unexpected reply: 0x%02x (expected 0x%02x)\n", Value, ExpectedReply[ReplyByte]);
+ goto failure;
+ }
+ }
+
+ /* Finally get the third byte, but only try it one time (see above).
+ Otherwise this takes around 45 seconds on a K7S5A Pro, when no mouse is plugged in. */
+ Status = i8042ReadDataWait(DeviceExtension, &Value);
+
+ if(!NT_SUCCESS(Status))
+ {
+ WARN_(I8042PRT, "Last byte was not transmitted after mouse reset, status 0x%08lx\n", Status);
+ goto failure;
+ }
+ else if(Value != 0x00)
+ {
+ WARN_(I8042PRT, "Last byte after mouse reset was not 0x00, but 0x%02x\n", Value);
+ goto failure;
+ }
+
+ DeviceExtension->Flags |= MOUSE_PRESENT;
+ INFO_(I8042PRT, "Mouse detected\n");
+ return;
failure:
- /* There is probably no mouse present. On some systems,
- the probe locks the entire keyboard controller. Let's
- try to get access to the keyboard again by sending a
- reset */
- i8042Flush(DeviceExtension);
- i8042Write(DeviceExtension, DeviceExtension->ControlPort, CTRL_SELF_TEST);
- i8042ReadDataWait(DeviceExtension, &Value);
- i8042Flush(DeviceExtension);
-
- INFO_(I8042PRT, "Mouse not detected\n");
+ /* There is probably no mouse present. On some systems,
+ the probe locks the entire keyboard controller. Let's
+ try to get access to the keyboard again by sending a
+ reset */
+ i8042Flush(DeviceExtension);
+ i8042Write(DeviceExtension, DeviceExtension->ControlPort, CTRL_SELF_TEST);
+ i8042ReadDataWait(DeviceExtension, &Value);
+ i8042Flush(DeviceExtension);
+
+ INFO_(I8042PRT, "Mouse not detected\n");
}
static NTSTATUS
i8042ConnectKeyboardInterrupt(
- IN PI8042_KEYBOARD_EXTENSION DeviceExtension)
-{
- PPORT_DEVICE_EXTENSION PortDeviceExtension;
- KIRQL DirqlMax;
- NTSTATUS Status;
-
- TRACE_(I8042PRT, "i8042ConnectKeyboardInterrupt()\n");
-
- PortDeviceExtension = DeviceExtension->Common.PortDeviceExtension;
- DirqlMax = MAX(
- PortDeviceExtension->KeyboardInterrupt.Dirql,
- PortDeviceExtension->MouseInterrupt.Dirql);
-
- INFO_(I8042PRT, "KeyboardInterrupt.Vector %lu\n",
- PortDeviceExtension->KeyboardInterrupt.Vector);
- INFO_(I8042PRT, "KeyboardInterrupt.Dirql %lu\n",
- PortDeviceExtension->KeyboardInterrupt.Dirql);
- INFO_(I8042PRT, "KeyboardInterrupt.DirqlMax %lu\n",
- DirqlMax);
- INFO_(I8042PRT, "KeyboardInterrupt.InterruptMode %s\n",
- PortDeviceExtension->KeyboardInterrupt.InterruptMode == LevelSensitive ? "LevelSensitive" : "Latched");
- INFO_(I8042PRT, "KeyboardInterrupt.ShareInterrupt %s\n",
- PortDeviceExtension->KeyboardInterrupt.ShareInterrupt ? "yes" : "no");
- INFO_(I8042PRT, "KeyboardInterrupt.Affinity 0x%lx\n",
- PortDeviceExtension->KeyboardInterrupt.Affinity);
- Status = IoConnectInterrupt(
- &PortDeviceExtension->KeyboardInterrupt.Object,
- i8042KbdInterruptService,
- DeviceExtension, &PortDeviceExtension->SpinLock,
- PortDeviceExtension->KeyboardInterrupt.Vector, PortDeviceExtension->KeyboardInterrupt.Dirql, DirqlMax,
- PortDeviceExtension->KeyboardInterrupt.InterruptMode, PortDeviceExtension->KeyboardInterrupt.ShareInterrupt,
- PortDeviceExtension->KeyboardInterrupt.Affinity, FALSE);
- if (!NT_SUCCESS(Status))
- {
- WARN_(I8042PRT, "IoConnectInterrupt() failed with status 0x%08x\n", Status);
- return Status;
- }
-
- if (DirqlMax == PortDeviceExtension->KeyboardInterrupt.Dirql)
- PortDeviceExtension->HighestDIRQLInterrupt = PortDeviceExtension->KeyboardInterrupt.Object;
- PortDeviceExtension->Flags |= KEYBOARD_INITIALIZED;
- return STATUS_SUCCESS;
+ IN PI8042_KEYBOARD_EXTENSION DeviceExtension)
+{
+ PPORT_DEVICE_EXTENSION PortDeviceExtension;
+ KIRQL DirqlMax;
+ NTSTATUS Status;
+
+ TRACE_(I8042PRT, "i8042ConnectKeyboardInterrupt()\n");
+
+ PortDeviceExtension = DeviceExtension->Common.PortDeviceExtension;
+ DirqlMax = MAX(
+ PortDeviceExtension->KeyboardInterrupt.Dirql,
+ PortDeviceExtension->MouseInterrupt.Dirql);
+
+ INFO_(I8042PRT, "KeyboardInterrupt.Vector %lu\n",
+ PortDeviceExtension->KeyboardInterrupt.Vector);
+ INFO_(I8042PRT, "KeyboardInterrupt.Dirql %lu\n",
+ PortDeviceExtension->KeyboardInterrupt.Dirql);
+ INFO_(I8042PRT, "KeyboardInterrupt.DirqlMax %lu\n",
+ DirqlMax);
+ INFO_(I8042PRT, "KeyboardInterrupt.InterruptMode %s\n",
+ PortDeviceExtension->KeyboardInterrupt.InterruptMode == LevelSensitive ? "LevelSensitive" : "Latched");
+ INFO_(I8042PRT, "KeyboardInterrupt.ShareInterrupt %s\n",
+ PortDeviceExtension->KeyboardInterrupt.ShareInterrupt ? "yes" : "no");
+ INFO_(I8042PRT, "KeyboardInterrupt.Affinity 0x%lx\n",
+ PortDeviceExtension->KeyboardInterrupt.Affinity);
+ Status = IoConnectInterrupt(
+ &PortDeviceExtension->KeyboardInterrupt.Object,
+ i8042KbdInterruptService,
+ DeviceExtension, &PortDeviceExtension->SpinLock,
+ PortDeviceExtension->KeyboardInterrupt.Vector, PortDeviceExtension->KeyboardInterrupt.Dirql, DirqlMax,
+ PortDeviceExtension->KeyboardInterrupt.InterruptMode, PortDeviceExtension->KeyboardInterrupt.ShareInterrupt,
+ PortDeviceExtension->KeyboardInterrupt.Affinity, FALSE);
+ if (!NT_SUCCESS(Status))
+ {
+ WARN_(I8042PRT, "IoConnectInterrupt() failed with status 0x%08x\n", Status);
+ return Status;
+ }
+
+ if (DirqlMax == PortDeviceExtension->KeyboardInterrupt.Dirql)
+ PortDeviceExtension->HighestDIRQLInterrupt = PortDeviceExtension->KeyboardInterrupt.Object;
+ PortDeviceExtension->Flags |= KEYBOARD_INITIALIZED;
+ return STATUS_SUCCESS;
}
static NTSTATUS
i8042ConnectMouseInterrupt(
- IN PI8042_MOUSE_EXTENSION DeviceExtension)
-{
- PPORT_DEVICE_EXTENSION PortDeviceExtension;
- KIRQL DirqlMax;
- NTSTATUS Status;
-
- TRACE_(I8042PRT, "i8042ConnectMouseInterrupt()\n");
-
- Status = i8042MouInitialize(DeviceExtension);
- if (!NT_SUCCESS(Status))
- return Status;
-
- PortDeviceExtension = DeviceExtension->Common.PortDeviceExtension;
- DirqlMax = MAX(
- PortDeviceExtension->KeyboardInterrupt.Dirql,
- PortDeviceExtension->MouseInterrupt.Dirql);
-
- INFO_(I8042PRT, "MouseInterrupt.Vector %lu\n",
- PortDeviceExtension->MouseInterrupt.Vector);
- INFO_(I8042PRT, "MouseInterrupt.Dirql %lu\n",
- PortDeviceExtension->MouseInterrupt.Dirql);
- INFO_(I8042PRT, "MouseInterrupt.DirqlMax %lu\n",
- DirqlMax);
- INFO_(I8042PRT, "MouseInterrupt.InterruptMode %s\n",
- PortDeviceExtension->MouseInterrupt.InterruptMode == LevelSensitive ? "LevelSensitive" : "Latched");
- INFO_(I8042PRT, "MouseInterrupt.ShareInterrupt %s\n",
- PortDeviceExtension->MouseInterrupt.ShareInterrupt ? "yes" : "no");
- INFO_(I8042PRT, "MouseInterrupt.Affinity 0x%lx\n",
- PortDeviceExtension->MouseInterrupt.Affinity);
- Status = IoConnectInterrupt(
- &PortDeviceExtension->MouseInterrupt.Object,
- i8042MouInterruptService,
- DeviceExtension, &PortDeviceExtension->SpinLock,
- PortDeviceExtension->MouseInterrupt.Vector, PortDeviceExtension->MouseInterrupt.Dirql, DirqlMax,
- PortDeviceExtension->MouseInterrupt.InterruptMode, PortDeviceExtension->MouseInterrupt.ShareInterrupt,
- PortDeviceExtension->MouseInterrupt.Affinity, FALSE);
- if (!NT_SUCCESS(Status))
- {
- WARN_(I8042PRT, "IoConnectInterrupt() failed with status 0x%08x\n", Status);
- goto cleanup;
- }
-
- if (DirqlMax == PortDeviceExtension->MouseInterrupt.Dirql)
- PortDeviceExtension->HighestDIRQLInterrupt = PortDeviceExtension->MouseInterrupt.Object;
-
- PortDeviceExtension->Flags |= MOUSE_INITIALIZED;
- Status = STATUS_SUCCESS;
+ IN PI8042_MOUSE_EXTENSION DeviceExtension)
+{
+ PPORT_DEVICE_EXTENSION PortDeviceExtension;
+ KIRQL DirqlMax;
+ NTSTATUS Status;
+
+ TRACE_(I8042PRT, "i8042ConnectMouseInterrupt()\n");
+
+ Status = i8042MouInitialize(DeviceExtension);
+ if (!NT_SUCCESS(Status))
+ return Status;
+
+ PortDeviceExtension = DeviceExtension->Common.PortDeviceExtension;
+ DirqlMax = MAX(
+ PortDeviceExtension->KeyboardInterrupt.Dirql,
+ PortDeviceExtension->MouseInterrupt.Dirql);
+
+ INFO_(I8042PRT, "MouseInterrupt.Vector %lu\n",
+ PortDeviceExtension->MouseInterrupt.Vector);
+ INFO_(I8042PRT, "MouseInterrupt.Dirql %lu\n",
+ PortDeviceExtension->MouseInterrupt.Dirql);
+ INFO_(I8042PRT, "MouseInterrupt.DirqlMax %lu\n",
+ DirqlMax);
+ INFO_(I8042PRT, "MouseInterrupt.InterruptMode %s\n",
+ PortDeviceExtension->MouseInterrupt.InterruptMode == LevelSensitive ? "LevelSensitive" : "Latched");
+ INFO_(I8042PRT, "MouseInterrupt.ShareInterrupt %s\n",
+ PortDeviceExtension->MouseInterrupt.ShareInterrupt ? "yes" : "no");
+ INFO_(I8042PRT, "MouseInterrupt.Affinity 0x%lx\n",
+ PortDeviceExtension->MouseInterrupt.Affinity);
+ Status = IoConnectInterrupt(
+ &PortDeviceExtension->MouseInterrupt.Object,
+ i8042MouInterruptService,
+ DeviceExtension, &PortDeviceExtension->SpinLock,
+ PortDeviceExtension->MouseInterrupt.Vector, PortDeviceExtension->MouseInterrupt.Dirql, DirqlMax,
+ PortDeviceExtension->MouseInterrupt.InterruptMode, PortDeviceExtension->MouseInterrupt.ShareInterrupt,
+ PortDeviceExtension->MouseInterrupt.Affinity, FALSE);
+ if (!NT_SUCCESS(Status))
+ {
+ WARN_(I8042PRT, "IoConnectInterrupt() failed with status 0x%08x\n", Status);
+ goto cleanup;
+ }
+
+ if (DirqlMax == PortDeviceExtension->MouseInterrupt.Dirql)
+ PortDeviceExtension->HighestDIRQLInterrupt = PortDeviceExtension->MouseInterrupt.Object;
+
+ PortDeviceExtension->Flags |= MOUSE_INITIALIZED;
+ Status = STATUS_SUCCESS;
cleanup:
- if (!NT_SUCCESS(Status))
- {
- PortDeviceExtension->Flags &= ~MOUSE_INITIALIZED;
- if (PortDeviceExtension->MouseInterrupt.Object)
- {
- IoDisconnectInterrupt(PortDeviceExtension->MouseInterrupt.Object);
- PortDeviceExtension->HighestDIRQLInterrupt = PortDeviceExtension->KeyboardInterrupt.Object;
- }
- }
- return Status;
+ if (!NT_SUCCESS(Status))
+ {
+ PortDeviceExtension->Flags &= ~MOUSE_INITIALIZED;
+ if (PortDeviceExtension->MouseInterrupt.Object)
+ {
+ IoDisconnectInterrupt(PortDeviceExtension->MouseInterrupt.Object);
+ PortDeviceExtension->HighestDIRQLInterrupt = PortDeviceExtension->KeyboardInterrupt.Object;
+ }
+ }
+ return Status;
}
static NTSTATUS
EnableInterrupts(
- IN PPORT_DEVICE_EXTENSION DeviceExtension,
- IN UCHAR FlagsToDisable,
- IN UCHAR FlagsToEnable)
-{
- i8042Flush(DeviceExtension);
-
- if (!i8042ChangeMode(DeviceExtension, FlagsToDisable, FlagsToEnable))
- return STATUS_UNSUCCESSFUL;
-
- /* Reset the mouse (if any) to start the detection */
- if (DeviceExtension->Flags & MOUSE_PRESENT)
- {
- KIRQL Irql;
-
- Irql = KeAcquireInterruptSpinLock(DeviceExtension->HighestDIRQLInterrupt);
- i8042IsrWritePort(DeviceExtension, MOU_CMD_RESET, CTRL_WRITE_MOUSE);
- KeReleaseInterruptSpinLock(DeviceExtension->HighestDIRQLInterrupt, Irql);
- }
-
- return STATUS_SUCCESS;
+ IN PPORT_DEVICE_EXTENSION DeviceExtension,
+ IN UCHAR FlagsToDisable,
+ IN UCHAR FlagsToEnable)
+{
+ i8042Flush(DeviceExtension);
+
+ if (!i8042ChangeMode(DeviceExtension, FlagsToDisable, FlagsToEnable))
+ return STATUS_UNSUCCESSFUL;
+
+ /* Reset the mouse (if any) to start the detection */
+ if (DeviceExtension->Flags & MOUSE_PRESENT)
+ {
+ KIRQL Irql;
+
+ Irql = KeAcquireInterruptSpinLock(DeviceExtension->HighestDIRQLInterrupt);
+ i8042IsrWritePort(DeviceExtension, MOU_CMD_RESET, CTRL_WRITE_MOUSE);
+ KeReleaseInterruptSpinLock(DeviceExtension->HighestDIRQLInterrupt, Irql);
+ }
+
+ return STATUS_SUCCESS;
}
static NTSTATUS
StartProcedure(
- IN PPORT_DEVICE_EXTENSION DeviceExtension)
-{
- NTSTATUS Status;
- UCHAR FlagsToDisable = 0;
- UCHAR FlagsToEnable = 0;
-
- if (DeviceExtension->DataPort == 0)
- {
- /* Unable to do something at the moment */
- return STATUS_SUCCESS;
- }
-
- if (!(DeviceExtension->Flags & (KEYBOARD_PRESENT | MOUSE_PRESENT)))
- {
- /* Try to detect them */
- TRACE_(I8042PRT, "Check if the controller is really a i8042\n");
- Status = i8042BasicDetect(DeviceExtension);
- if (!NT_SUCCESS(Status))
- {
- WARN_(I8042PRT, "i8042BasicDetect() failed with status 0x%08lx\n", Status);
- return STATUS_UNSUCCESSFUL;
- }
-
- /* First detect the mouse and then the keyboard!
- If we do it the other way round, some systems throw away settings like the keyboard translation, when detecting the mouse.
-
- Don't detect the mouse if we're in 1st stage setup! */
- if(!IsFirstStageSetup())
- {
- TRACE_(I8042PRT, "Detecting mouse\n");
- i8042DetectMouse(DeviceExtension);
- }
-
- TRACE_(I8042PRT, "Detecting keyboard\n");
- i8042DetectKeyboard(DeviceExtension);
-
- INFO_(I8042PRT, "Keyboard present: %s\n", DeviceExtension->Flags & KEYBOARD_PRESENT ? "YES" : "NO");
- INFO_(I8042PRT, "Mouse present : %s\n", DeviceExtension->Flags & MOUSE_PRESENT ? "YES" : "NO");
- }
-
- /* Connect interrupts */
- if (DeviceExtension->Flags & KEYBOARD_PRESENT &&
- DeviceExtension->Flags & KEYBOARD_CONNECTED &&
- DeviceExtension->Flags & KEYBOARD_STARTED &&
- !(DeviceExtension->Flags & KEYBOARD_INITIALIZED))
- {
- /* Keyboard is ready to be initialized */
- Status = i8042ConnectKeyboardInterrupt(DeviceExtension->KeyboardExtension);
- if (NT_SUCCESS(Status))
- {
- DeviceExtension->Flags |= KEYBOARD_INITIALIZED;
- FlagsToDisable |= CCB_KBD_DISAB;
- FlagsToEnable |= CCB_KBD_INT_ENAB;
- }
- }
-
- if (DeviceExtension->Flags & MOUSE_PRESENT &&
- DeviceExtension->Flags & MOUSE_CONNECTED &&
- DeviceExtension->Flags & MOUSE_STARTED &&
- !(DeviceExtension->Flags & MOUSE_INITIALIZED))
- {
- /* Mouse is ready to be initialized */
- Status = i8042ConnectMouseInterrupt(DeviceExtension->MouseExtension);
- if (NT_SUCCESS(Status))
- {
- DeviceExtension->Flags |= MOUSE_INITIALIZED;
- FlagsToDisable |= CCB_MOUSE_DISAB;
- FlagsToEnable |= CCB_MOUSE_INT_ENAB;
- }
- }
-
- if (FlagsToEnable)
- Status = EnableInterrupts(DeviceExtension, FlagsToDisable, FlagsToEnable);
- else
- Status = STATUS_SUCCESS;
-
- return Status;
+ IN PPORT_DEVICE_EXTENSION DeviceExtension)
+{
+ NTSTATUS Status;
+ UCHAR FlagsToDisable = 0;
+ UCHAR FlagsToEnable = 0;
+
+ if (DeviceExtension->DataPort == 0)
+ {
+ /* Unable to do something at the moment */
+ return STATUS_SUCCESS;
+ }
+
+ if (!(DeviceExtension->Flags & (KEYBOARD_PRESENT | MOUSE_PRESENT)))
+ {
+ /* Try to detect them */
+ TRACE_(I8042PRT, "Check if the controller is really a i8042\n");
+ Status = i8042BasicDetect(DeviceExtension);
+ if (!NT_SUCCESS(Status))
+ {
+ WARN_(I8042PRT, "i8042BasicDetect() failed with status 0x%08lx\n", Status);
+ return STATUS_UNSUCCESSFUL;
+ }
+
+ /* First detect the mouse and then the keyboard!
+ If we do it the other way round, some systems throw away settings like the keyboard translation, when detecting the mouse.
+
+ Don't detect the mouse if we're in 1st stage setup! */
+ if(!IsFirstStageSetup())
+ {
+ TRACE_(I8042PRT, "Detecting mouse\n");
+ i8042DetectMouse(DeviceExtension);
+ }
+
+ TRACE_(I8042PRT, "Detecting keyboard\n");
+ i8042DetectKeyboard(DeviceExtension);
+
+ INFO_(I8042PRT, "Keyboard present: %s\n", DeviceExtension->Flags & KEYBOARD_PRESENT ? "YES" : "NO");
+ INFO_(I8042PRT, "Mouse present : %s\n", DeviceExtension->Flags & MOUSE_PRESENT ? "YES" : "NO");
+ }
+
+ /* Connect interrupts */
+ if (DeviceExtension->Flags & KEYBOARD_PRESENT &&
+ DeviceExtension->Flags & KEYBOARD_CONNECTED &&
+ DeviceExtension->Flags & KEYBOARD_STARTED &&
+ !(DeviceExtension->Flags & KEYBOARD_INITIALIZED))
+ {
+ /* Keyboard is ready to be initialized */
+ Status = i8042ConnectKeyboardInterrupt(DeviceExtension->KeyboardExtension);
+ if (NT_SUCCESS(Status))
+ {
+ DeviceExtension->Flags |= KEYBOARD_INITIALIZED;
+ FlagsToDisable |= CCB_KBD_DISAB;
+ FlagsToEnable |= CCB_KBD_INT_ENAB;
+ }
+ }
+
+ if (DeviceExtension->Flags & MOUSE_PRESENT &&
+ DeviceExtension->Flags & MOUSE_CONNECTED &&
+ DeviceExtension->Flags & MOUSE_STARTED &&
+ !(DeviceExtension->Flags & MOUSE_INITIALIZED))
+ {
+ /* Mouse is ready to be initialized */
+ Status = i8042ConnectMouseInterrupt(DeviceExtension->MouseExtension);
+ if (NT_SUCCESS(Status))
+ {
+ DeviceExtension->Flags |= MOUSE_INITIALIZED;
+ FlagsToDisable |= CCB_MOUSE_DISAB;
+ FlagsToEnable |= CCB_MOUSE_INT_ENAB;
+ }
+ }
+
+ if (FlagsToEnable)
+ Status = EnableInterrupts(DeviceExtension, FlagsToDisable, FlagsToEnable);
+ else
+ Status = STATUS_SUCCESS;
+
+ return Status;
}
static NTSTATUS
i8042PnpStartDevice(
- IN PDEVICE_OBJECT DeviceObject,
- IN PCM_RESOURCE_LIST AllocatedResources,
- IN PCM_RESOURCE_LIST AllocatedResourcesTranslated)
-{
- PFDO_DEVICE_EXTENSION DeviceExtension;
- PPORT_DEVICE_EXTENSION PortDeviceExtension;
- PCM_PARTIAL_RESOURCE_DESCRIPTOR ResourceDescriptor, ResourceDescriptorTranslated;
- INTERRUPT_DATA InterruptData;
- BOOLEAN FoundDataPort = FALSE;
- BOOLEAN FoundControlPort = FALSE;
- BOOLEAN FoundIrq = FALSE;
- ULONG i;
- NTSTATUS Status;
-
- TRACE_(I8042PRT, "i8042PnpStartDevice(%p)\n", DeviceObject);
- DeviceExtension = (PFDO_DEVICE_EXTENSION)DeviceObject->DeviceExtension;
- PortDeviceExtension = DeviceExtension->PortDeviceExtension;
-
- ASSERT(DeviceExtension->PnpState == dsStopped);
-
- if (!AllocatedResources)
- {
- WARN_(I8042PRT, "No allocated resources sent to driver\n");
- return STATUS_INSUFFICIENT_RESOURCES;
- }
- if (AllocatedResources->Count != 1)
- {
- WARN_(I8042PRT, "Wrong number of allocated resources sent to driver\n");
- return STATUS_INSUFFICIENT_RESOURCES;
- }
- if (AllocatedResources->List[0].PartialResourceList.Version != 1
- || AllocatedResources->List[0].PartialResourceList.Revision != 1
- || AllocatedResourcesTranslated->List[0].PartialResourceList.Version != 1
- || AllocatedResourcesTranslated->List[0].PartialResourceList.Revision != 1)
- {
- WARN_(I8042PRT, "Revision mismatch: %u.%u != 1.1 or %u.%u != 1.1\n",
- AllocatedResources->List[0].PartialResourceList.Version,
- AllocatedResources->List[0].PartialResourceList.Revision,
- AllocatedResourcesTranslated->List[0].PartialResourceList.Version,
- AllocatedResourcesTranslated->List[0].PartialResourceList.Revision);
- return STATUS_REVISION_MISMATCH;
- }
-
- /* Get Irq and optionally control port and data port */
- for (i = 0; i < AllocatedResources->List[0].PartialResourceList.Count; i++)
- {
- ResourceDescriptor = &AllocatedResources->List[0].PartialResourceList.PartialDescriptors[i];
- ResourceDescriptorTranslated = &AllocatedResourcesTranslated->List[0].PartialResourceList.PartialDescriptors[i];
- switch (ResourceDescriptor->Type)
- {
- case CmResourceTypePort:
- {
- if (ResourceDescriptor->u.Port.Length == 1)
- {
- /* We assume that the first ressource will
- * be the control port and the second one
- * will be the data port...
- */
- if (!FoundDataPort)
- {
- PortDeviceExtension->DataPort = ULongToPtr(ResourceDescriptor->u.Port.Start.u.LowPart);
- INFO_(I8042PRT, "Found data port: %p\n", PortDeviceExtension->DataPort);
- FoundDataPort = TRUE;
- }
- else if (!FoundControlPort)
- {
- PortDeviceExtension->ControlPort = ULongToPtr(ResourceDescriptor->u.Port.Start.u.LowPart);
- INFO_(I8042PRT, "Found control port: %p\n", PortDeviceExtension->ControlPort);
- FoundControlPort = TRUE;
- }
- else
- {
- WARN_(I8042PRT, "Too much I/O ranges provided: 0x%lx\n", ResourceDescriptor->u.Port.Length);
- return STATUS_INVALID_PARAMETER;
- }
- }
- else
- WARN_(I8042PRT, "Invalid I/O range length: 0x%lx\n", ResourceDescriptor->u.Port.Length);
- break;
- }
- case CmResourceTypeInterrupt:
- {
- if (FoundIrq)
- return STATUS_INVALID_PARAMETER;
- InterruptData.Dirql = (KIRQL)ResourceDescriptorTranslated->u.Interrupt.Level;
- InterruptData.Vector = ResourceDescriptorTranslated->u.Interrupt.Vector;
- InterruptData.Affinity = ResourceDescriptorTranslated->u.Interrupt.Affinity;
- if (ResourceDescriptorTranslated->Flags & CM_RESOURCE_INTERRUPT_LATCHED)
- InterruptData.InterruptMode = Latched;
- else
- InterruptData.InterruptMode = LevelSensitive;
- InterruptData.ShareInterrupt = (ResourceDescriptorTranslated->ShareDisposition == CmResourceShareShared);
- INFO_(I8042PRT, "Found irq resource: %lu\n", ResourceDescriptor->u.Interrupt.Level);
- FoundIrq = TRUE;
- break;
- }
- default:
- WARN_(I8042PRT, "Unknown resource descriptor type 0x%x\n", ResourceDescriptor->Type);
- }
- }
-
- if (!FoundIrq)
- {
- WARN_(I8042PRT, "Interrupt resource was not found in allocated resources list\n");
- return STATUS_INSUFFICIENT_RESOURCES;
- }
- else if (DeviceExtension->Type == Keyboard && (!FoundDataPort || !FoundControlPort))
- {
- WARN_(I8042PRT, "Some required resources were not found in allocated resources list\n");
- return STATUS_INSUFFICIENT_RESOURCES;
- }
- else if (DeviceExtension->Type == Mouse && (FoundDataPort || FoundControlPort))
- {
- WARN_(I8042PRT, "Too much resources were provided in allocated resources list\n");
- return STATUS_INVALID_PARAMETER;
- }
-
- switch (DeviceExtension->Type)
- {
- case Keyboard:
- {
- RtlCopyMemory(
- &PortDeviceExtension->KeyboardInterrupt,
- &InterruptData,
- sizeof(INTERRUPT_DATA));
- PortDeviceExtension->Flags |= KEYBOARD_STARTED;
- Status = StartProcedure(PortDeviceExtension);
- break;
- }
- case Mouse:
- {
- RtlCopyMemory(
- &PortDeviceExtension->MouseInterrupt,
- &InterruptData,
- sizeof(INTERRUPT_DATA));
- PortDeviceExtension->Flags |= MOUSE_STARTED;
- Status = StartProcedure(PortDeviceExtension);
- break;
- }
- default:
- {
- WARN_(I8042PRT, "Unknown FDO type %u\n", DeviceExtension->Type);
- ASSERT(!(PortDeviceExtension->Flags & KEYBOARD_CONNECTED) || !(PortDeviceExtension->Flags & MOUSE_CONNECTED));
- Status = STATUS_INVALID_DEVICE_REQUEST;
- }
- }
-
- if (NT_SUCCESS(Status))
- DeviceExtension->PnpState = dsStarted;
-
- return Status;
+ IN PDEVICE_OBJECT DeviceObject,
+ IN PCM_RESOURCE_LIST AllocatedResources,
+ IN PCM_RESOURCE_LIST AllocatedResourcesTranslated)
+{
+ PFDO_DEVICE_EXTENSION DeviceExtension;
+ PPORT_DEVICE_EXTENSION PortDeviceExtension;
+ PCM_PARTIAL_RESOURCE_DESCRIPTOR ResourceDescriptor, ResourceDescriptorTranslated;
+ INTERRUPT_DATA InterruptData;
+ BOOLEAN FoundDataPort = FALSE;
+ BOOLEAN FoundControlPort = FALSE;
+ BOOLEAN FoundIrq = FALSE;
+ ULONG i;
+ NTSTATUS Status;
+
+ TRACE_(I8042PRT, "i8042PnpStartDevice(%p)\n", DeviceObject);
+ DeviceExtension = (PFDO_DEVICE_EXTENSION)DeviceObject->DeviceExtension;
+ PortDeviceExtension = DeviceExtension->PortDeviceExtension;
+
+ ASSERT(DeviceExtension->PnpState == dsStopped);
+
+ if (!AllocatedResources)
+ {
+ WARN_(I8042PRT, "No allocated resources sent to driver\n");
+ return STATUS_INSUFFICIENT_RESOURCES;
+ }
+ if (AllocatedResources->Count != 1)
+ {
+ WARN_(I8042PRT, "Wrong number of allocated resources sent to driver\n");
+ return STATUS_INSUFFICIENT_RESOURCES;
+ }
+ if (AllocatedResources->List[0].PartialResourceList.Version != 1
+ || AllocatedResources->List[0].PartialResourceList.Revision != 1
+ || AllocatedResourcesTranslated->List[0].PartialResourceList.Version != 1
+ || AllocatedResourcesTranslated->List[0].PartialResourceList.Revision != 1)
+ {
+ WARN_(I8042PRT, "Revision mismatch: %u.%u != 1.1 or %u.%u != 1.1\n",
+ AllocatedResources->List[0].PartialResourceList.Version,
+ AllocatedResources->List[0].PartialResourceList.Revision,
+ AllocatedResourcesTranslated->List[0].PartialResourceList.Version,
+ AllocatedResourcesTranslated->List[0].PartialResourceList.Revision);
+ return STATUS_REVISION_MISMATCH;
+ }
+
+ /* Get Irq and optionally control port and data port */
+ for (i = 0; i < AllocatedResources->List[0].PartialResourceList.Count; i++)
+ {
+ ResourceDescriptor = &AllocatedResources->List[0].PartialResourceList.PartialDescriptors[i];
+ ResourceDescriptorTranslated = &AllocatedResourcesTranslated->List[0].PartialResourceList.PartialDescriptors[i];
+ switch (ResourceDescriptor->Type)
+ {
+ case CmResourceTypePort:
+ {
+ if (ResourceDescriptor->u.Port.Length == 1)
+ {
+ /* We assume that the first ressource will
+ * be the control port and the second one
+ * will be the data port...
+ */
+ if (!FoundDataPort)
+ {
+ PortDeviceExtension->DataPort = ULongToPtr(ResourceDescriptor->u.Port.Start.u.LowPart);
+ INFO_(I8042PRT, "Found data port: %p\n", PortDeviceExtension->DataPort);
+ FoundDataPort = TRUE;
+ }
+ else if (!FoundControlPort)
+ {
+ PortDeviceExtension->ControlPort = ULongToPtr(ResourceDescriptor->u.Port.Start.u.LowPart);
+ INFO_(I8042PRT, "Found control port: %p\n", PortDeviceExtension->ControlPort);
+ FoundControlPort = TRUE;
+ }
+ else
+ {
+ WARN_(I8042PRT, "Too much I/O ranges provided: 0x%lx\n", ResourceDescriptor->u.Port.Length);
+ return STATUS_INVALID_PARAMETER;
+ }
+ }
+ else
+ WARN_(I8042PRT, "Invalid I/O range length: 0x%lx\n", ResourceDescriptor->u.Port.Length);
+ break;
+ }
+ case CmResourceTypeInterrupt:
+ {
+ if (FoundIrq)
+ return STATUS_INVALID_PARAMETER;
+ InterruptData.Dirql = (KIRQL)ResourceDescriptorTranslated->u.Interrupt.Level;
+ InterruptData.Vector = ResourceDescriptorTranslated->u.Interrupt.Vector;
+ InterruptData.Affinity = ResourceDescriptorTranslated->u.Interrupt.Affinity;
+ if (ResourceDescriptorTranslated->Flags & CM_RESOURCE_INTERRUPT_LATCHED)
+ InterruptData.InterruptMode = Latched;
+ else
+ InterruptData.InterruptMode = LevelSensitive;
+ InterruptData.ShareInterrupt = (ResourceDescriptorTranslated->ShareDisposition == CmResourceShareShared);
+ INFO_(I8042PRT, "Found irq resource: %lu\n", ResourceDescriptor->u.Interrupt.Level);
+ FoundIrq = TRUE;
+ break;
+ }
+ default:
+ WARN_(I8042PRT, "Unknown resource descriptor type 0x%x\n", ResourceDescriptor->Type);
+ }
+ }
+
+ if (!FoundIrq)
+ {
+ WARN_(I8042PRT, "Interrupt resource was not found in allocated resources list\n");
+ return STATUS_INSUFFICIENT_RESOURCES;
+ }
+ else if (DeviceExtension->Type == Keyboard && (!FoundDataPort || !FoundControlPort))
+ {
+ WARN_(I8042PRT, "Some required resources were not found in allocated resources list\n");
+ return STATUS_INSUFFICIENT_RESOURCES;
+ }
+ else if (DeviceExtension->Type == Mouse && (FoundDataPort || FoundControlPort))
+ {
+ WARN_(I8042PRT, "Too much resources were provided in allocated resources list\n");
+ return STATUS_INVALID_PARAMETER;
+ }
+
+ switch (DeviceExtension->Type)
+ {
+ case Keyboard:
+ {
+ RtlCopyMemory(
+ &PortDeviceExtension->KeyboardInterrupt,
+ &InterruptData,
+ sizeof(INTERRUPT_DATA));
+ PortDeviceExtension->Flags |= KEYBOARD_STARTED;
+ Status = StartProcedure(PortDeviceExtension);
+ break;
+ }
+ case Mouse:
+ {
+ RtlCopyMemory(
+ &PortDeviceExtension->MouseInterrupt,
+ &InterruptData,
+ sizeof(INTERRUPT_DATA));
+ PortDeviceExtension->Flags |= MOUSE_STARTED;
+ Status = StartProcedure(PortDeviceExtension);
+ break;
+ }
+ default:
+ {
+ WARN_(I8042PRT, "Unknown FDO type %u\n", DeviceExtension->Type);
+ ASSERT(!(PortDeviceExtension->Flags & KEYBOARD_CONNECTED) || !(PortDeviceExtension->Flags & MOUSE_CONNECTED));
+ Status = STATUS_INVALID_DEVICE_REQUEST;
+ }
+ }
+
+ if (NT_SUCCESS(Status))
+ DeviceExtension->PnpState = dsStarted;
+
+ return Status;
}
NTSTATUS NTAPI
i8042Pnp(
- IN PDEVICE_OBJECT DeviceObject,
- IN PIRP Irp)
-{
- PIO_STACK_LOCATION Stack;
- ULONG MinorFunction;
- I8042_DEVICE_TYPE DeviceType;
- ULONG_PTR Information = 0;
- NTSTATUS Status;
-
- Stack = IoGetCurrentIrpStackLocation(Irp);
- MinorFunction = Stack->MinorFunction;
- DeviceType = ((PFDO_DEVICE_EXTENSION)DeviceObject->DeviceExtension)->Type;
-
- switch (MinorFunction)
- {
- case IRP_MN_START_DEVICE: /* 0x00 */
- {
- TRACE_(I8042PRT, "IRP_MJ_PNP / IRP_MN_START_DEVICE\n");
-
- /* Call lower driver (if any) */
- if (DeviceType != PhysicalDeviceObject)
- {
- Status = ForwardIrpAndWait(DeviceObject, Irp);
- if (NT_SUCCESS(Status))
- Status = i8042PnpStartDevice(
- DeviceObject,
- Stack->Parameters.StartDevice.AllocatedResources,
- Stack->Parameters.StartDevice.AllocatedResourcesTranslated);
- }
- else
- Status = STATUS_SUCCESS;
- break;
- }
- case IRP_MN_QUERY_DEVICE_RELATIONS: /* (optional) 0x07 */
- {
- switch (Stack->Parameters.QueryDeviceRelations.Type)
- {
- case BusRelations:
- {
- PDEVICE_RELATIONS DeviceRelations;
-
- TRACE_(I8042PRT, "IRP_MJ_PNP / IRP_MN_QUERY_DEVICE_RELATIONS / BusRelations\n");
- DeviceRelations = ExAllocatePool(PagedPool, sizeof(DEVICE_RELATIONS));
- if (DeviceRelations)
- {
- DeviceRelations->Count = 0;
- Information = (ULONG_PTR)DeviceRelations;
- Status = STATUS_SUCCESS;
- }
- else
- Status = STATUS_INSUFFICIENT_RESOURCES;
- break;
- }
- case RemovalRelations:
- {
- TRACE_(I8042PRT, "IRP_MJ_PNP / IRP_MN_QUERY_DEVICE_RELATIONS / RemovalRelations\n");
- return ForwardIrpAndForget(DeviceObject, Irp);
- }
- default:
- ERR_(I8042PRT, "IRP_MJ_PNP / IRP_MN_QUERY_DEVICE_RELATIONS / Unknown type 0x%lx\n",
- Stack->Parameters.QueryDeviceRelations.Type);
- ASSERT(FALSE);
- return ForwardIrpAndForget(DeviceObject, Irp);
- }
- break;
- }
- case IRP_MN_FILTER_RESOURCE_REQUIREMENTS: /* (optional) 0x0d */
- {
- TRACE_(I8042PRT, "IRP_MJ_PNP / IRP_MN_FILTER_RESOURCE_REQUIREMENTS\n");
- /* Nothing to do */
- Status = Irp->IoStatus.Status;
- break;
- }
- default:
- {
- ERR_(I8042PRT, "IRP_MJ_PNP / unknown minor function 0x%x\n", MinorFunction);
- return ForwardIrpAndForget(DeviceObject, Irp);
- }
- }
-
- Irp->IoStatus.Information = Information;
- Irp->IoStatus.Status = Status;
- IoCompleteRequest(Irp, IO_NO_INCREMENT);
- return Status;
-}
+ IN PDEVICE_OBJECT DeviceObject,
+ IN PIRP Irp)
+{
+ PIO_STACK_LOCATION Stack;
+ ULONG MinorFunction;
+ I8042_DEVICE_TYPE DeviceType;
+ ULONG_PTR Information = 0;
+ NTSTATUS Status;
+
+ Stack = IoGetCurrentIrpStackLocation(Irp);
+ MinorFunction = Stack->MinorFunction;
+ DeviceType = ((PFDO_DEVICE_EXTENSION)DeviceObject->DeviceExtension)->Type;
+
+ switch (MinorFunction)
+ {
+ case IRP_MN_START_DEVICE: /* 0x00 */
+ {
+ TRACE_(I8042PRT, "IRP_MJ_PNP / IRP_MN_START_DEVICE\n");
+
+ /* Call lower driver (if any) */
+ if (DeviceType != PhysicalDeviceObject)
+ {
+ Status = ForwardIrpAndWait(DeviceObject, Irp);
+ if (NT_SUCCESS(Status))
+ Status = i8042PnpStartDevice(
+ DeviceObject,
+ Stack->Parameters.StartDevice.AllocatedResources,
+ Stack->Parameters.StartDevice.AllocatedResourcesTranslated);
+ }
+ else
+ Status = STATUS_SUCCESS;
+ break;
+ }
+ case IRP_MN_QUERY_DEVICE_RELATIONS: /* (optional) 0x07 */
+ {
+ switch (Stack->Parameters.QueryDeviceRelations.Type)
+ {
+ case BusRelations:
+ {
+ PDEVICE_RELATIONS DeviceRelations;
+
+ TRACE_(I8042PRT, "IRP_MJ_PNP / IRP_MN_QUERY_DEVICE_RELATIONS / BusRelations\n");
+ DeviceRelations = ExAllocatePool(PagedPool, sizeof(DEVICE_RELATIONS));
+ if (DeviceRelations)
+ {
+ DeviceRelations->Count = 0;
+ Information = (ULONG_PTR)DeviceRelations;
+ Status = STATUS_SUCCESS;
+ }
+ else
+ Status = STATUS_INSUFFICIENT_RESOURCES;
+ break;
+ }
+ case RemovalRelations:
+ {
+ TRACE_(I8042PRT, "IRP_MJ_PNP / IRP_MN_QUERY_DEVICE_RELATIONS / RemovalRelations\n");
+ return ForwardIrpAndForget(DeviceObject, Irp);
+ }
+ default:
+ ERR_(I8042PRT, "IRP_MJ_PNP / IRP_MN_QUERY_DEVICE_RELATIONS / Unknown type 0x%lx\n",
+ Stack->Parameters.QueryDeviceRelations.Type);
+ ASSERT(FALSE);
+ return ForwardIrpAndForget(DeviceObject, Irp);
+ }
+ break;
+ }
+ case IRP_MN_FILTER_RESOURCE_REQUIREMENTS: /* (optional) 0x0d */
+ {
+ TRACE_(I8042PRT, "IRP_MJ_PNP / IRP_MN_FILTER_RESOURCE_REQUIREMENTS\n");
+ /* Nothing to do */
+ Status = Irp->IoStatus.Status;
+ break;
+ }
+ default:
+ {
+ ERR_(I8042PRT, "IRP_MJ_PNP / unknown minor function 0x%x\n", MinorFunction);
+ return ForwardIrpAndForget(DeviceObject, Irp);
+ }
+ }
+
+ Irp->IoStatus.Information = Information;
+ Irp->IoStatus.Status = Status;
+ IoCompleteRequest(Irp, IO_NO_INCREMENT);
+ return Status;
+}
More information about the Ros-diffs
mailing list