[ros-kernel] latest cvs ISO boot failure...

[Richard Campbell]

FYI the iso doesn't boot with QEMU either, it halts with an 
INACCESSIBLE_BOOT_DEVICE error.

Casper Hornstrup wrote:

>Revision 1.54 breaks the VMware CD-ROM support.
>
>Casper
>
>  
>
>>-----Original Message-----
>>From: ros-kernel-bounces at reactos.com 
>>[mailto:ros-kernel-bounces at reactos.com] On Behalf Of Hartmut Birr
>>Sent: 25. september 2004 17:40
>>To: 'ReactOS Kernel List'
>>Subject: RE: [ros-kernel] latest cvs ISO boot failure...
>>
>>Hi,
>>
>>it seems that the vmware CDROM isn't an atapi device. An 
>>atapi device must response with 0xeb/0x14 after a soft reset. 
>>Do you know the last revision which has worked? I've looked 
>>to the linux ide driver. Linux doesn't use the reset command 
>>for detecting the devices. Linux uses first an ATA identify 
>>command and if the drive does response with an error it sends 
>>an ATAPI identify command. We should change the device 
>>detection to this way. 
>>
>>- Hartmut
>>
>>    
>>
>>>-----Original Message-----
>>>From: ros-kernel-bounces at reactos.com
>>>[mailto:ros-kernel-bounces at reactos.com] On Behalf Of Casper 
>>>      
>>>
>>Hornstrup
>>    
>>
>>>Sent: Saturday, September 25, 2004 4:04 PM
>>>To: 'ReactOS Kernel List'
>>>Subject: RE: [ros-kernel] latest cvs ISO boot failure...
>>>
>>>
>>>This is a VMware VM.
>>>Hard Disk 1 (IDE 0:0) (primary master) CD-ROM 1 (IDE 1:0) 
>>>      
>>>
>>(secondary 
>>    
>>
>>>master)
>>>
>>>Output is:
>>>
>>>DriverBase for atapi.sys: dcb18000
>>>  Check drive 0: High 0xaa Low 0x55
>>>  Check drive 1: High 0xaa Low 0x55
>>>  Check drive 0: High 0xaa Low 0x55
>>>
>>>Casper
>>>
>>>      
>>>
>>_______________________________________________
>>Ros-kernel mailing list
>>Ros-kernel at reactos.com
>>http://reactos.com/mailman/listinfo/ros-kernel
>>
>>    
>>
>
>_______________________________________________
>Ros-kernel mailing list
>Ros-kernel at reactos.com
>http://reactos.com/mailman/listinfo/ros-kernel
>
>  
>