Can't find hard disk

Ask your support questions in here

Moderator: Moderator Team

Post Reply
jrmoffett
Posts: 2
Joined: Mon Mar 04, 2019 5:59 pm

Can't find hard disk

Post by jrmoffett » Mon Mar 04, 2019 6:06 pm

I am trying to install React OS latest version from CD in an old computer (circa 2001). I removed the current Windows 7 hard disk and installed a FAT32 formatted (blank) 139GB SATA hard drive. When I start the install from the boot CD it gets me to the page where I select the partition to install on but the error box pops up and says that the installer cannot find a hard drive. The drive is empty, and formatted for FAT32. It is on an old SATA controller on the motherboard, and it is the only hard drive currently installed. I have not been able to get the installer to recognize the hard drive. Any suggestions for how to get it recognized?

I read in one post that I should select IDE compatibility mode for the SATA controller, but I don't see that option anywhere in the motherboard BIOS.

Thanks very much.

John

mrmajik45
Posts: 331
Joined: Sun Sep 24, 2017 1:21 am
Location: USA, Indiana
Contact:

Re: Can't find hard disk

Post by mrmajik45 » Mon Mar 04, 2019 8:39 pm

On the error message can you press TAB + K at the same time and give us the results when you type "bt" without quotes and press enter.
ReactOS Donator ~ $5.00 | Linux Mint Donator ~ $1.00 in BTC

Reactions
Posts: 201
Joined: Mon Dec 31, 2018 3:30 am

Re: Can't find hard disk

Post by Reactions » Mon Mar 04, 2019 8:46 pm

You need to convert the disk to MBR mode. It's probably GPT formatted. Use the Windows partitioning tool to convert it. Also make sure it's listed as "online".
Please support/share my Patreon! Helps so much! https://www.patreon.com/reactions

hbelusca
Developer
Posts: 1118
Joined: Sat Dec 26, 2009 10:36 pm
Location: Zagreb, Croatia

Re: Can't find hard disk

Post by hbelusca » Mon Mar 04, 2019 9:04 pm

We should support SATA directly.

Reactions
Posts: 201
Joined: Mon Dec 31, 2018 3:30 am

Re: Can't find hard disk

Post by Reactions » Mon Mar 04, 2019 9:08 pm

hbelusca wrote:
Mon Mar 04, 2019 9:04 pm
We should support SATA directly.
Works fine, doesn't it?
Please support/share my Patreon! Helps so much! https://www.patreon.com/reactions

jrmoffett
Posts: 2
Joined: Mon Mar 04, 2019 5:59 pm

Re: Can't find hard disk

Post by jrmoffett » Tue Mar 05, 2019 12:42 am

Thanks for the input. This is an old computer I built back in about 2000, with XP for the OS. It was made with high quality components, so it is still working. I wanted to use it to test React OS and see how it handled older Windows software. In any case, I did a full format of the 140GB Seagate 10k rpm SATA drive with the Format32 utility and it is set as MBR and the only drive on the system. Could not get past the no hard drive detected error.

So I tried the Live ReactOS version burned to a disk, and it got through part of the setup and then gave a bluescreen. I tried again using debug mode and it got much further, but then just did a hard hang. It is all standard hardware (Asus motherboard, NVidia video, etc). I will try loading the Live version again and see what happens.

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest